From 95aeead28a2597cfddf4bb11bcade1b518adf83c Mon Sep 17 00:00:00 2001 From: Sean Young Date: Mon, 13 Aug 2012 08:59:51 -0300 Subject: [PATCH] [media] lirc: lirc_ene0100.h is not referenced anywhere There is a proper ene0100 driver anyway. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/lirc/lirc_ene0100.h | 169 ------------------------------ 1 file changed, 169 deletions(-) delete mode 100644 drivers/staging/media/lirc/lirc_ene0100.h diff --git a/drivers/staging/media/lirc/lirc_ene0100.h b/drivers/staging/media/lirc/lirc_ene0100.h deleted file mode 100644 index 06bebd6acc46..000000000000 --- a/drivers/staging/media/lirc/lirc_ene0100.h +++ /dev/null @@ -1,169 +0,0 @@ -/* - * driver for ENE KB3926 B/C/D CIR (also known as ENE0100) - * - * Copyright (C) 2009 Maxim Levitsky - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include -#include - -/* hardware address */ -#define ENE_STATUS 0 /* hardware status - unused */ -#define ENE_ADDR_HI 1 /* hi byte of register address */ -#define ENE_ADDR_LO 2 /* low byte of register address */ -#define ENE_IO 3 /* read/write window */ -#define ENE_MAX_IO 4 - -/* 8 bytes of samples, divided in 2 halfs*/ -#define ENE_SAMPLE_BUFFER 0xF8F0 /* regular sample buffer */ -#define ENE_SAMPLE_SPC_MASK (1 << 7) /* sample is space */ -#define ENE_SAMPLE_VALUE_MASK 0x7F -#define ENE_SAMPLE_OVERFLOW 0x7F -#define ENE_SAMPLES_SIZE 4 - -/* fan input sample buffer */ -#define ENE_SAMPLE_BUFFER_FAN 0xF8FB /* this buffer holds high byte of */ - /* each sample of normal buffer */ - -#define ENE_FAN_SMPL_PULS_MSK 0x8000 /* this bit of combined sample */ - /* if set, says that sample is pulse */ -#define ENE_FAN_VALUE_MASK 0x0FFF /* mask for valid bits of the value */ - -/* first firmware register */ -#define ENE_FW1 0xF8F8 -#define ENE_FW1_ENABLE (1 << 0) /* enable fw processing */ -#define ENE_FW1_TXIRQ (1 << 1) /* TX interrupt pending */ -#define ENE_FW1_WAKE (1 << 6) /* enable wake from S3 */ -#define ENE_FW1_IRQ (1 << 7) /* enable interrupt */ - -/* second firmware register */ -#define ENE_FW2 0xF8F9 -#define ENE_FW2_BUF_HIGH (1 << 0) /* which half of the buffer to read */ -#define ENE_FW2_IRQ_CLR (1 << 2) /* clear this on IRQ */ -#define ENE_FW2_GP40_AS_LEARN (1 << 4) /* normal input is used as */ - /* learning input */ -#define ENE_FW2_FAN_AS_NRML_IN (1 << 6) /* fan is used as normal input */ -#define ENE_FW2_LEARNING (1 << 7) /* hardware supports learning and TX */ - -/* fan as input settings - only if learning capable */ -#define ENE_FAN_AS_IN1 0xFE30 /* fan init reg 1 */ -#define ENE_FAN_AS_IN1_EN 0xCD -#define ENE_FAN_AS_IN2 0xFE31 /* fan init reg 2 */ -#define ENE_FAN_AS_IN2_EN 0x03 -#define ENE_SAMPLE_PERIOD_FAN 61 /* fan input has fixed sample period */ - -/* IRQ registers block (for revision B) */ -#define ENEB_IRQ 0xFD09 /* IRQ number */ -#define ENEB_IRQ_UNK1 0xFD17 /* unknown setting = 1 */ -#define ENEB_IRQ_STATUS 0xFD80 /* irq status */ -#define ENEB_IRQ_STATUS_IR (1 << 5) /* IR irq */ - -/* IRQ registers block (for revision C,D) */ -#define ENEC_IRQ 0xFE9B /* new irq settings register */ -#define ENEC_IRQ_MASK 0x0F /* irq number mask */ -#define ENEC_IRQ_UNK_EN (1 << 4) /* always enabled */ -#define ENEC_IRQ_STATUS (1 << 5) /* irq status and ACK */ - -/* CIR block settings */ -#define ENE_CIR_CONF1 0xFEC0 -#define ENE_CIR_CONF1_ADC_ON 0x7 /* receiver on gpio40 enabled */ -#define ENE_CIR_CONF1_LEARN1 (1 << 3) /* enabled on learning mode */ -#define ENE_CIR_CONF1_TX_ON 0x30 /* enabled on transmit */ -#define ENE_CIR_CONF1_TX_CARR (1 << 7) /* send TX carrier or not */ - -#define ENE_CIR_CONF2 0xFEC1 /* unknown setting = 0 */ -#define ENE_CIR_CONF2_LEARN2 (1 << 4) /* set on enable learning */ -#define ENE_CIR_CONF2_GPIO40DIS (1 << 5) /* disable normal input via gpio40 */ - -#define ENE_CIR_SAMPLE_PERIOD 0xFEC8 /* sample period in us */ -#define ENE_CIR_SAMPLE_OVERFLOW (1 << 7) /* interrupt on overflows if set */ - - -/* transmitter - not implemented yet */ -/* KB3926C and higher */ -/* transmission is very similar to receiving, a byte is written to */ -/* ENE_TX_INPUT, in same manner as it is read from sample buffer */ -/* sample period is fixed*/ - - -/* transmitter ports */ -#define ENE_TX_PORT1 0xFC01 /* this enables one or both */ -#define ENE_TX_PORT1_EN (1 << 5) /* TX ports */ -#define ENE_TX_PORT2 0xFC08 -#define ENE_TX_PORT2_EN (1 << 1) - -#define ENE_TX_INPUT 0xFEC9 /* next byte to transmit */ -#define ENE_TX_SPC_MASK (1 << 7) /* Transmitted sample is space */ -#define ENE_TX_UNK1 0xFECB /* set to 0x63 */ -#define ENE_TX_SMPL_PERIOD 50 /* transmit sample period */ - - -#define ENE_TX_CARRIER 0xFECE /* TX carrier * 2 (khz) */ -#define ENE_TX_CARRIER_UNKBIT 0x80 /* This bit set on transmit */ -#define ENE_TX_CARRIER_LOW 0xFECF /* TX carrier / 2 */ - -/* Hardware versions */ -#define ENE_HW_VERSION 0xFF00 /* hardware revision */ -#define ENE_HW_UNK 0xFF1D -#define ENE_HW_UNK_CLR (1 << 2) -#define ENE_HW_VER_MAJOR 0xFF1E /* chip version */ -#define ENE_HW_VER_MINOR 0xFF1F -#define ENE_HW_VER_OLD 0xFD00 - -#define same_sign(a, b) ((((a) > 0) && (b) > 0) || ((a) < 0 && (b) < 0)) - -#define ENE_DRIVER_NAME "enecir" -#define ENE_MAXGAP 250000 /* this is amount of time we wait - before turning the sampler, chosen - arbitry */ - -#define space(len) (-(len)) /* add a space */ - -/* software defines */ -#define ENE_IRQ_RX 1 -#define ENE_IRQ_TX 2 - -#define ENE_HW_B 1 /* 3926B */ -#define ENE_HW_C 2 /* 3926C */ -#define ENE_HW_D 3 /* 3926D */ - -#define ene_printk(level, text, ...) \ - printk(level ENE_DRIVER_NAME ": " text, ## __VA_ARGS__) - -struct ene_device { - struct pnp_dev *pnp_dev; - struct lirc_driver *lirc_driver; - - /* hw settings */ - unsigned long hw_io; - int irq; - - int hw_revision; /* hardware revision */ - int hw_learning_and_tx_capable; /* learning capable */ - int hw_gpio40_learning; /* gpio40 is learning */ - int hw_fan_as_normal_input; /* fan input is used as regular input */ - - /* device data */ - int idle; - int fan_input_inuse; - - int sample; - int in_use; - - struct timeval gap_start; -}; -- 2.11.0