From 96ff0f5c7efd4a2205c48a76a6a1fcd2731e6128 Mon Sep 17 00:00:00 2001 From: Jamie Lentin Date: Sat, 17 Nov 2012 09:51:04 +0100 Subject: [PATCH] power: Add simple poweroff-gpio driver Given appropriate devicetree bindings, this driver registers a pm_power_off function to set a GPIO line high/low to power down your board. Signed-off-by: Jamie Lentin Signed-off-by: Andrew Lunn Tested-by:Simon Baatz Signed-off-by: Jason Cooper --- .../devicetree/bindings/gpio/gpio-poweroff.txt | 22 ++++ drivers/power/Kconfig | 3 + drivers/power/Makefile | 1 + drivers/power/reset/Kconfig | 15 +++ drivers/power/reset/Makefile | 1 + drivers/power/reset/gpio-poweroff.c | 129 +++++++++++++++++++++ 6 files changed, 171 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-poweroff.txt create mode 100644 drivers/power/reset/Kconfig create mode 100644 drivers/power/reset/Makefile create mode 100644 drivers/power/reset/gpio-poweroff.c diff --git a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt new file mode 100644 index 000000000000..558cdf3c9abc --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt @@ -0,0 +1,22 @@ +GPIO line that should be set high/low to power off a device + +Required properties: +- compatible : should be "gpio-poweroff". +- gpios : The GPIO to set high/low, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be + low to power down the board set it to "Active Low", otherwise set + gpio to "Active High". + +Optional properties: +- input : Initially configure the GPIO line as an input. Only reconfigure + it to an output when the pm_power_off function is called. If this optional + property is not specified, the GPIO is initialized as an output in its + inactive state. + + +Examples: + +gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio 4 0>; /* GPIO 4 Active Low */ +}; diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 49a893972318..b1d956d81f0c 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -335,6 +335,9 @@ config AB8500_BATTERY_THERM_ON_BATCTRL help Say Y to enable battery temperature measurements using thermistor connected on BATCTRL ADC. + +source "drivers/power/reset/Kconfig" + endif # POWER_SUPPLY source "drivers/power/avs/Kconfig" diff --git a/drivers/power/Makefile b/drivers/power/Makefile index b949cf85590c..f1d99f4a0bc3 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -49,3 +49,4 @@ obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o obj-$(CONFIG_POWER_AVS) += avs/ obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o +obj-$(CONFIG_POWER_RESET) += reset/ diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig new file mode 100644 index 000000000000..6461b489fb09 --- /dev/null +++ b/drivers/power/reset/Kconfig @@ -0,0 +1,15 @@ +menuconfig POWER_RESET + bool "Board level reset or power off" + help + Provides a number of drivers which either reset a complete board + or shut it down, by manipulating the main power supply on the board. + + Say Y here to enable board reset and power off + +config POWER_RESET_GPIO + bool "GPIO power-off driver" + depends on OF_GPIO && POWER_RESET + help + This driver supports turning off your board via a GPIO line. + If your board needs a GPIO high/low to power down, say Y and + create a binding in your devicetree. diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile new file mode 100644 index 000000000000..751488a4a0c5 --- /dev/null +++ b/drivers/power/reset/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o diff --git a/drivers/power/reset/gpio-poweroff.c b/drivers/power/reset/gpio-poweroff.c new file mode 100644 index 000000000000..0491e5335d02 --- /dev/null +++ b/drivers/power/reset/gpio-poweroff.c @@ -0,0 +1,129 @@ +/* + * Toggles a GPIO pin to power down a device + * + * Jamie Lentin + * Andrew Lunn + * + * Copyright (C) 2012 Jamie Lentin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Hold configuration here, cannot be more than one instance of the driver + * since pm_power_off itself is global. + */ +static int gpio_num = -1; +static int gpio_active_low; + +static void gpio_poweroff_do_poweroff(void) +{ + BUG_ON(gpio_num == -1); + + /* drive it active */ + gpio_direction_output(gpio_num, !gpio_active_low); + mdelay(100); + /* rising edge or drive inactive */ + gpio_set_value(gpio_num, gpio_active_low); + mdelay(100); + /* falling edge */ + gpio_set_value(gpio_num, !gpio_active_low); + + /* give it some time */ + mdelay(3000); + + WARN_ON(1); +} + +static int __devinit gpio_poweroff_probe(struct platform_device *pdev) +{ + enum of_gpio_flags flags; + bool input = false; + int ret; + + /* If a pm_power_off function has already been added, leave it alone */ + if (pm_power_off != NULL) { + pr_err("%s: pm_power_off function already registered", + __func__); + return -EBUSY; + } + + gpio_num = of_get_gpio_flags(pdev->dev.of_node, 0, &flags); + if (gpio_num < 0) { + pr_err("%s: Could not get GPIO configuration: %d", + __func__, gpio_num); + return -ENODEV; + } + gpio_active_low = flags & OF_GPIO_ACTIVE_LOW; + + if (of_get_property(pdev->dev.of_node, "input", NULL)) + input = true; + + ret = gpio_request(gpio_num, "poweroff-gpio"); + if (ret) { + pr_err("%s: Could not get GPIO %d", __func__, gpio_num); + return ret; + } + if (input) { + if (gpio_direction_input(gpio_num)) { + pr_err("Could not set direction of GPIO %d to input", + gpio_num); + goto err; + } + } else { + if (gpio_direction_output(gpio_num, gpio_active_low)) { + pr_err("Could not set direction of GPIO %d", gpio_num); + goto err; + } + } + + pm_power_off = &gpio_poweroff_do_poweroff; + return 0; + +err: + gpio_free(gpio_num); + return -ENODEV; +} + +static int __devexit gpio_poweroff_remove(struct platform_device *pdev) +{ + if (gpio_num != -1) + gpio_free(gpio_num); + if (pm_power_off == &gpio_poweroff_do_poweroff) + pm_power_off = NULL; + + return 0; +} + +static const struct of_device_id of_gpio_poweroff_match[] = { + { .compatible = "gpio-poweroff", }, + {}, +}; + +static struct platform_driver gpio_poweroff_driver = { + .probe = gpio_poweroff_probe, + .remove = __devexit_p(gpio_poweroff_remove), + .driver = { + .name = "poweroff-gpio", + .owner = THIS_MODULE, + .of_match_table = of_gpio_poweroff_match, + }, +}; + +module_platform_driver(gpio_poweroff_driver); + +MODULE_AUTHOR("Jamie Lentin "); +MODULE_DESCRIPTION("GPIO poweroff driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:poweroff-gpio"); -- 2.11.0