From 9d17ce493a3ef1b140a4c831ba72fb435576c75a Mon Sep 17 00:00:00 2001 From: Yanir Lubetkin Date: Sat, 28 Feb 2015 10:09:34 +0000 Subject: [PATCH] e1000e: fix obscure comments The interface to the device flash was modified in i219 and later HW. This patch better describes the change and the impact on the driver. CC: John W Linville Reported-by: John W Linville Signed-off-by: Yanir Lubetkin Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 7523f510c7e4..9d81c0317433 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -603,12 +603,15 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) u16 i; u32 nvm_size; - /* Can't read flash registers if the register set isn't mapped. */ nvm->type = e1000_nvm_flash_sw; - /* in SPT, gfpreg doesn't exist. NVM size is taken from the - * STRAP register - */ + if (hw->mac.type == e1000_pch_spt) { + /* in SPT, gfpreg doesn't exist. NVM size is taken from the + * STRAP register. This is because in SPT the GbE Flash region + * is no longer accessed through the flash registers. Instead, + * the mechanism has changed, and the Flash region access + * registers are now implemented in GbE memory space. + */ nvm->flash_base_addr = 0; nvm_size = (((er32(STRAP) >> 1) & 0x1F) + 1) * NVM_SIZE_MULTIPLIER; @@ -618,6 +621,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) /* Set the base address for flash register access */ hw->flash_address = hw->hw_addr + E1000_FLASH_BASE_ADDR; } else { + /* Can't read flash registers if register set isn't mapped. */ if (!hw->flash_address) { e_dbg("ERROR: Flash registers not mapped\n"); return -E1000_ERR_CONFIG; -- 2.11.0