From 9dff05ece326ecdb4a876ce13b25acf1b1fa726a Mon Sep 17 00:00:00 2001 From: shebs Date: Wed, 5 May 1999 21:44:03 +0000 Subject: [PATCH] Initial revision --- gdb/testsuite/config/cfdbug.exp | 20 ++ gdb/testsuite/gdb.base/annota1.c | 33 ++++ gdb/testsuite/gdb.base/annota1.exp | 393 +++++++++++++++++++++++++++++++++++++ gdb/testsuite/gdb.base/annota2.cc | 25 +++ gdb/testsuite/gdb.base/annota2.exp | 224 +++++++++++++++++++++ 5 files changed, 695 insertions(+) create mode 100644 gdb/testsuite/config/cfdbug.exp create mode 100644 gdb/testsuite/gdb.base/annota1.c create mode 100644 gdb/testsuite/gdb.base/annota1.exp create mode 100644 gdb/testsuite/gdb.base/annota2.cc create mode 100644 gdb/testsuite/gdb.base/annota2.exp diff --git a/gdb/testsuite/config/cfdbug.exp b/gdb/testsuite/config/cfdbug.exp new file mode 100644 index 0000000000..955288c7ff --- /dev/null +++ b/gdb/testsuite/config/cfdbug.exp @@ -0,0 +1,20 @@ +# Copyright (C) 1997 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +# Please email any bugs, comments, and/or additions to this file to: +# bug-gdb@prep.ai.mit.edu + +load_lib "../config/monitor.exp" diff --git a/gdb/testsuite/gdb.base/annota1.c b/gdb/testsuite/gdb.base/annota1.c new file mode 100644 index 0000000000..7eeee77156 --- /dev/null +++ b/gdb/testsuite/gdb.base/annota1.c @@ -0,0 +1,33 @@ +#include +#include + +#ifdef __sh__ +#define signal(a,b) /* Signals not supported on this target - make them go away */ +#endif + + +void +handle_USR1 (sig) + int sig; +{ +} + +int value; + +int +main () +{ + int my_array[3] = { 1, 2, 3 }; + + value = 7; + +#ifdef SIGUSR1 + signal (SIGUSR1, handle_USR1); +#endif + + printf ("value is %d\n", value); + printf ("my_array[2] is %d\n", my_array[2]); + + return 0; +} + diff --git a/gdb/testsuite/gdb.base/annota1.exp b/gdb/testsuite/gdb.base/annota1.exp new file mode 100644 index 0000000000..fb3703edc3 --- /dev/null +++ b/gdb/testsuite/gdb.base/annota1.exp @@ -0,0 +1,393 @@ +# Copyright (C) 1999 +# Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +# Please email any bugs, comments, and/or additions to this file to: +# bug-gdb@prep.ai.mit.edu + +# This file was written by Elena Zannoni (ezannoni@cygnus.com) + +if $tracelevel then { + strace $tracelevel +} + + +# +# test running programs +# +set prms_id 0 +set bug_id 0 + +set testfile "annota1" +set srcfile ${testfile}.c +set binfile ${objdir}/${subdir}/${testfile} + +if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } { + gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." +} + + +# are we on a target board? If so, don't run these tests. +# note: this is necessary because we cannot use runto_main (which would +# work for remote targets too) because of the different prompt we get +# when using annotation level 2. +# +if ![isnative] then { + return 0 +} + + +gdb_exit +gdb_start +gdb_reinitialize_dir $srcdir/$subdir +gdb_load ${binfile} + +if [target_info exists gdb_stub] { + gdb_step_for_stub; +} + +# +# the line at which break main will put the breakpoint +# +set main_line 20 + +# The commands we test here produce many lines of output; disable "press +# to continue" prompts. +send_gdb "set height 0\n" +gdb_expect -re "$gdb_prompt $" + +# +# break at main +# +gdb_test "break main" \ + "Breakpoint.*at.* file .*$srcfile, line.*" \ + "breakpoint main" + + +# +# NOTE: this prompt is OK only when the annotation level is > 1 +# NOTE: When this prompt is in use the gdb_test procedure cannot be used because +# it assumes that the last char after the gdb_prompt is a white space. This is not +# true with this annotated prompt. So we must use send_gdb and gdb_expect. +# + +set old_gdb_prompt $gdb_prompt +set gdb_prompt "\r\n\032\032pre-prompt\r\n$gdb_prompt \r\n\032\032prompt\r\n" + + + +# +# set the annotation level to 2 +# +# of course, this will test: +# annotate-pre-prompt +# annotate-prompt +# annotate-post-prompt (in the next block) +# +send_gdb "set annotate 2\n" +gdb_expect { + -re "set annotate 2\r\n$gdb_prompt$" { pass "annotation set at level 2" } + -re ".*$gdb_prompt$" { fail "annotation set at level 2" } + timeout { fail "annotation set at level 2 (timeout)" } + } + + +# +# info break will test: +# annotate-breakpoints-headers +# annotate-field +# annotate-breakpoints-table +# annotate-record +# annotate-breakpoints-table-end +# +send_gdb "info break\n" +gdb_expect { + -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-headers\r\n\r\n\032\032field 0\r\nNum \r\n\032\032field 1\r\nType \r\n\032\032field 2\r\nDisp \r\n\032\032field 3\r\nEnb \r\n\032\032field 4\r\nAddress \r\n\032\032field 5\r\nWhat\r\n\r\n\032\032breakpoints-table\r\n\r\n\032\032record\r\n\r\n\032\032field 0\r\n1 \r\n\032\032field 1\r\nbreakpoint \r\n\032\032field 2\r\nkeep \r\n\032\032field 3\r\ny \r\n\032\032field 4\r\n$hex \r\n\032\032field 5\r\nin main at ${srcdir}/${subdir}/${srcfile}:$main_line\r\n\r\n\032\032breakpoints-table-end\r\n$gdb_prompt$" \ + {pass "breakpoint info"} + -re ".*$gdb_prompt$" { fail "breakpoint info" } + timeout { fail "breakpoint info (timeout)" } +} + + +# +# run to a break point will test: +# annotate-frames-invalid +# annotate-breakpoints-invalid (a.k.a. breakpoints-changed) +# annotate-starting +# annotate-breakpoint +# annotate-frame-begin +# annotate-frame-function-name +# annotate-frame-args +# annotate-frame-source-begin +# annotate-frame-source-file +# annotate-frame-source-file-end +# annotate-frame-source-line +# annotate-frame-source-end +# annotate-source +# annotate-frame-end +# annotate-stopped +# +send_gdb "run\n" + gdb_expect { + -re "\r\n\032\032post-prompt\r\nStarting program: $binfile \r\n\r\n\032\032frames-invalid\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032breakpoints-invalid\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032breakpoint 1\r\n\r\nBreakpoint 1, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*annota1.c\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$main_line\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*$srcfile:$main_line:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \ + { pass "run until main breakpoint" } + -re ".*$gdb_prompt$" { fail "run until main breakpoint" } + timeout { fail "run until main breakpoint (timeout)" } + } + + +# +# Let's do a next, to get to a point where the array is initialized +# We don't care about the annotated output for this operation, it is the same as +# the one produced by run above +# +send_gdb "next\n" +gdb_expect { + -re ".*$gdb_prompt$" { pass "go after array init line" } + timeout { fail "go after array init line (timeout)" } +} + + +# +# printing the array will test: +# annotate-value-history-begin +# annotate-value-history-value +# annotate-array-section-begin +# annotate-elt +# FIXME: annotate-elt-rep and annotate-elt-rep-end not tested +# annotate-array-section-end +# annotate-value-history-end +# FIXME: annotate-value-begin and annotate-value-end not tested (the gdb output +# command would cause them to be used) +# +send_gdb "print my_array\n" +gdb_expect { + -re "\r\n\032\032post-prompt\r\n\r\n\032\032value-history-begin 1 -\r\n.*= \r\n\032\032value-history-value\r\n.\r\n\032\032array-section-begin 0 -\r\n1\r\n\032\032elt\r\n, 2\r\n\032\032elt\r\n, 3\r\n\032\032elt\r\n\r\n\032\032array-section-end\r\n.\r\n\r\n\032\032value-history-end\r\n$gdb_prompt$" \ + { pass "print array" } + -re ".*$gdb_prompt$" { fail "print array" } + timeout { fail "print array (timeout)" } +} + + +# +# this should generate an error message, so to test: +# annotate-error-begin +# FIXME: annotate-error not tested +# + +#exp_internal 1 +send_gdb "print non_existent_value\n" +gdb_expect { + -re "\r\n\032\032post-prompt\r\n\r\n\032\032error-begin\r\nNo symbol \"non_existent_value\" in current context.\r\n\r\n\032\032error\r\n$gdb_prompt$" \ + { pass "print non_existent_value" } + -re ".*$gdb_prompt$" { fail "print non_existent_value" } + timeout { fail "print non_existent_value (timeout)" } +} + + +# +# break at signal handler. So that, once we are in the sig handler, if we do a bt +# we can test annotate-signal-handler-caller +# +send_gdb "break handle_USR1\n" +gdb_expect { + -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n$gdb_prompt$" \ + { pass "breakpoint handle_USR1" } + -re ".*$gdb_prompt$" { fail "break at handle_USR1" } + timeout { fail "break at handle_USR1 (timeout)" } +} + +# +# break at printf. When we are stopped at printf, we can test +# +send_gdb "break printf\n" +gdb_expect { + -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex.*$gdb_prompt$" \ + { pass "breakpoint printf" } + -re ".*$gdb_prompt$" { fail "break printf" } + timeout { fail "break printf (timeout)" } +} + +# +# get to printf +# +send_gdb "continue\n" +gdb_expect { + -re "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032breakpoint 3\r\n\r\nBreakpoint 3, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n\032\032frame-function-name\r\nprintf\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-where\r\n from.*\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \ + { pass "continue to printf" } + -re ".*$gdb_prompt$" { fail "continue to printf" } + timeout { fail "continue to printf (timeout)" } +} + +# +# test: +# annotate-frame-where +# annotate-frame-address +# annotate-frame-address-end +# +send_gdb "backtrace\n" +gdb_expect { + -re "\r\n\032\032post-prompt\r\n\r\n\032\032frame-begin 0 $hex\r\n.0 \r\n\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n\032\032frame-function-name\r\nprintf\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-where\r\n from.*\r\n\032\032frame-end\r\n\r\n\032\032frame-begin 1 $hex\r\n.1 \r\n\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n${srcdir}/${subdir}/${srcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032frame-end\r\n$gdb_prompt$" \ + { pass "bactrace from shlibrary" } + -re ".*$gdb_prompt$" { fail "backtrace from shlibrary" } + timeout { fail "backtrace from shlibrary (timeout)" } +} + + +# +# test printing a frame with some arguments: +# annotate-arg-begin +# annotate-arg-name-end +# annotate-arg-value +# annotate-arg-end +# +send_gdb "signal SIGUSR1\n" +gdb_expect { + -re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n16\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n${srcdir}/${subdir}/${srcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:185:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \ + { pass "send SIGUSR1" } + -re ".*$gdb_prompt$" { fail "send SIGUSR1" } + timeout { fail "send SIGUSR1 (timeout)" } +} + + +# +# test: +# annotate-signal-handler-caller +# +send_gdb "backtrace\n" +gdb_expect { + -re ".*frame-begin 0 $hex.*0.*frame-end.*frame-begin 1 $hex.*1.*\032\032signal-handler-caller\r\n.signal handler called.\r\n\r\n\032\032frame-end\r\n\r\n.*frame-begin 2 $hex.*2.*frame-begin 3 $hex.*3.*frame-end.*$gdb_prompt$" \ + { pass "backtrace @ signal handler" } + -re ".*$gdb_prompt$" { fail "backtrace @ signal handler" } + timeout { fail "backtrace @ signal handler (timeout)" } +} + +# +# delete all the breakpoints +# +send_gdb "delete 1\n" +gdb_expect { + -re "\r\n\032\032post-prompt\r\n$gdb_prompt$" \ + { pass "delete bp 1" } + -re ".*$gdb_prompt$" { fail "delete bp 1" } + timeout { fail "delete bp 1 (timeout)" } +} + +send_gdb "delete 2\n" +gdb_expect { + -re "\r\n\032\032post-prompt\r\n$gdb_prompt$" \ + { pass "delete bp 2" } + -re ".*$gdb_prompt$" { fail "delete bp 2 " } + timeout { fail "delete bp 2 (timeout)" } +} + +send_gdb "delete 3\n" +gdb_expect { + -re "\r\n\032\032post-prompt\r\n$gdb_prompt$" \ + { pass "delete bp 3" } + -re ".*$gdb_prompt$" { fail "delete bp 3" } + timeout { fail "delete bp 3 (timeout)" } +} + +# +# break at main, after value is initialized. This is in preparation +# to test the annotate output for the display command. +# +send_gdb "break main\n" +gdb_expect { + -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file ${srcdir}/${subdir}/${srcfile}, line $main_line.*$gdb_prompt$" \ + { pass "break at 28" } + -re ".*$gdb_prompt$" { fail "break at 28" } + timeout { fail "break at 28 (timeout)" } +} + +# +# display the value; test: +# annotate-display-begin +# annotate-display-number-end +# annotate-display-format +# annotate-display-expression +# annotate-display-expression-end +# annotate-display-end +# FIXME: annotate-display-value not tested +# +send_gdb "display value\n" +gdb_expect { + -re "post-prompt\r\n\r\n\032\032display-begin\r\n1\r\n\032\032display-number-end\r\n: \r\n\032\032display-format\r\n\r\n\032\032display-expression\r\nvalue\r\n\032\032display-expression-end\r\n = \r\n\032\032display-expression\r\n7\r\n\r\n\032\032display-end\r\n$gdb_prompt$" \ + { pass "set up display" } + -re ".*$gdb_prompt$" { fail "set up display" } + timeout { fail "set up display (timeout)" } +} + + +# should ask query. Test annotate-query. +# we don't care about anything else here, only the query. + +send_gdb "run\n" +gdb_expect { + -re "pre-query.*already.*\\(y or n\\).*query\r\n" { + send_gdb "y\n" + gdb_expect { + -re ".*post-query.*$gdb_prompt$" \ + { pass "re-run" } + -re ".*$gdb_prompt$" { fail "re-run" } + timeout { fail "re-run (timeout)" } + } + } + -re ".*$gdb_prompt$" { fail "re-run" } + timeout { fail "re-run (timeout)" } +} + + +# +# Send a signal that is not handled; test: +# annotate-signalled +# annotate-signal-name +# annotate-signal-name-end +# annotate-signal-string +# annotate-signal-string-end +# FIXME: annotate-signal not tested (requires that the inferior be +# stopped by a "random" signal) +# +send_gdb "signal SIGTRAP\n" +gdb_expect { + -re ".*\032\032post-prompt\r\nContinuing with signal SIGTRAP.\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032signalled\r\n\r\n\032\032frames-invalid\r\n\r\nProgram terminated with signal \r\n\032\032signal-name\r\nSIGTRAP\r\n\032\032signal-name-end\r\n, \r\n\032\032signal-string\r\nTrace.breakpoint trap\r\n\032\032signal-string-end\r\n.\r\nThe program no longer exists.\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \ + { pass "signal sent" } + -re ".*$gdb_prompt$" { fail "signal sent" } + timeout { fail "signal sent (timeout)" } +} + + +# Check for production of a core file +# and remove it! + +set exec_output [remote_exec build "ls core"] + +if [ regexp "core not found" $exec_output] { + pass "No core dumped" +} else { + if [ regexp "No such file or directory" $exec_output] { + pass "No core dumped" + } else { + remote_exec build "rm -f core" + pass "Core dumped and removed" + } +} + + +# restore the original prompt for the rest of the testsuite + +set gdb_prompt $old_gdb_prompt diff --git a/gdb/testsuite/gdb.base/annota2.cc b/gdb/testsuite/gdb.base/annota2.cc new file mode 100644 index 0000000000..e9d7da0347 --- /dev/null +++ b/gdb/testsuite/gdb.base/annota2.cc @@ -0,0 +1,25 @@ +class A { +public: + int x; + int y; + int foo (int arg); +}; + + +int A::foo (int arg) +{ + x += arg; + return arg *2; +} + +int main() +{ + A a; + + a.x = 1; + a.y = 2; + + printf ("a.x is %d\n", a.x); + return 0; +} + diff --git a/gdb/testsuite/gdb.base/annota2.exp b/gdb/testsuite/gdb.base/annota2.exp new file mode 100644 index 0000000000..7c9116bdb7 --- /dev/null +++ b/gdb/testsuite/gdb.base/annota2.exp @@ -0,0 +1,224 @@ +# Copyright (C) 1999 +# Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +# Please email any bugs, comments, and/or additions to this file to: +# bug-gdb@prep.ai.mit.edu + +# This file was written by Elena Zannoni (ezannoni@cygnus.com) + +if $tracelevel then { + strace $tracelevel +} + + +# +# test running programs +# +set prms_id 0 +set bug_id 0 + +set testfile "annota2" +set srcfile ${testfile}.cc +set binfile ${objdir}/${subdir}/${testfile} + +if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++ additional_flags=-w}] != "" } { + gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." +} + +# are we on a target board? If so, don't run these tests. +# note: this is necessary because we cannot use runto_main (which would +# work for remote targets too) because of the different prompt we get +# when using annotation level 2. +# +if ![isnative] then { + return 0 +} + + +gdb_exit +gdb_start +gdb_reinitialize_dir $srcdir/$subdir +gdb_load ${binfile} + +if [target_info exists gdb_stub] { + gdb_step_for_stub; +} + +# +# line number where we need to stop in main +# +set main_line 22 + +# The commands we test here produce many lines of output; disable "press +# to continue" prompts. +send_gdb "set height 0\n" +gdb_expect -re "$gdb_prompt $" + +# +# break at main +# +gdb_test "break 22" \ + "Breakpoint.*at.* file .*$srcfile, line.*" \ + "breakpoint main" + + +# +# NOTE: this prompt is OK only when the annotation level is > 1 +# NOTE: When this prompt is in use the gdb_test procedure cannot be used because +# it assumes that the last char of the gdb_prompt is a white space. This is not +# true with this annotated prompt. So we must use send_gdb and gdb_expect. +# + +set old_gdb_prompt $gdb_prompt +set gdb_prompt "\r\n\032\032pre-prompt\r\n$gdb_prompt \r\n\032\032prompt\r\n" + +send_gdb "set annotate 2\n" +gdb_expect { + -re "set annotate 2\r\n$gdb_prompt$" { pass "annotation set at level 2" } + -re ".*$gdb_prompt$" { fail "annotation set at level 2" } + timeout { fail "annotation set at level 2 (timeout)" } + } + +send_gdb "run\n" + gdb_expect { + -re "\r\n\032\032post-prompt\r\nStarting program: $binfile \r\n\r\n\032\032frames-invalid\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032breakpoints-invalid\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032breakpoint 1\r\n\r\nBreakpoint 1, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*annota2.cc\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$main_line\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*$srcfile:$main_line:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \ + { pass "run until main breakpoint" } + -re ".*$gdb_prompt$" { fail "run until main breakpoint" } + timeout { fail "run until main breakpoint (timeout)" } + } + +# +# print class 'a' with public fields. +# this will test: +# annotate-field-begin +# annotate-field-name-end +# annotate-field-value +# annotate-field-end +# +send_gdb "print a\n" +gdb_expect { + -re "\r\n\032\032post-prompt\r\n\r\n\032\032value-history-begin 1 -\r\n.*= \r\n\032\032value-history-value\r\n\\{\r\n\032\032field-begin -\r\nx\r\n\032\032field-name-end\r\n = \r\n\032\032field-value\r\n1\r\n\032\032field-end\r\n, \r\n\032\032field-begin -\r\ny\r\n\032\032field-name-end\r\n = \r\n\032\032field-value\r\n2\r\n\032\032field-end\r\n\\}\r\n\r\n\032\032value-history-end\r\n$gdb_prompt$" \ + { pass "print class" } + -re ".*$gdb_prompt$" { fail "print class" } + timeout { fail "print class (timeout)" } +} + +# +# continue until exit +# this will test: +# annotate-exited +# +send_gdb "continue\n" +gdb_expect { + -re "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\na.x is 1\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032exited 0\r\n\r\nProgram exited normally.\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \ + { pass "continue until exit" } + -re ".*$gdb_prompt$" { fail "continue to exit" } + timeout { fail "continue to exit (timeout)" } +} + +# +# delete all breakpoints +# +send_gdb "delete\n" +gdb_expect { + -re " " { + send_gdb "y\n" + gdb_expect { + -re " " { pass "delete bps" } + -re ".*$gdb_prompt$" { fail "delete bps" } + timeout { fail "delete bps (timeout)" } + } + } + -re ".*$gdb_prompt$" { fail "delete bps" } + timeout { fail "delete bps (timeout)" } +} + +# +# break at first line of main. +# +send_gdb "break main\n" +gdb_expect { + -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n$gdb_prompt$" \ + { pass "breakpoint at main" } + -re ".*$gdb_prompt$" { fail "break at main" } + timeout { fail "break at main (timeout)" } +} + +# +# change value of main_line +# +set main_line 19 + +# +# run program up to breakpoint. +# +send_gdb "run\n" + gdb_expect { + -re "\r\n\032\032post-prompt\r\n.*Starting program: $binfile \r\n\r\n\032\032frames-invalid\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032breakpoints-invalid\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*annota2.cc\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$main_line\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*$srcfile:$main_line:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \ + { pass "run until main breakpoint" } + -re ".*$gdb_prompt$" { fail "run until main breakpoint" } + timeout { fail "run until main breakpoint (timeout)" } + } + +# +# set up a watch point on a.x +# +send_gdb "watch a.x\n" +gdb_expect { + -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nWatchpoint 3: a.x\r\n$gdb_prompt$" \ + { pass "set watch on a.x" } + -re ".*$gdb_prompt$" { fail "set watch on a.x" } + timeout { fail "set watch on a.x (timeout)" } +} + +# +# do a next, so that the watchpoint triggers. This will test: +# annotate-watchpoint +# +send_gdb "next\n" +gdb_expect { + -re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032watchpoint 3\r\nWatchpoint 3: a.x\r\n\r\nOld value = 4\r\nNew value = 1\r\n\r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*$srcfile\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n20\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \ + { pass "watch triggered on a.x" } + -re ".*$gdb_prompt$" { fail "watch triggered on a.x" } + timeout { fail "watch triggered on a.x (timeout)" } +} + + +# +# send ^C to gdb, so that the quit() function gets called +# and annotate-quit is tested +# test: +# annotate-quit +# +send_gdb "\003" +gdb_expect { + -re "\r\n\032\032error-begin\r\nQuit\r\n\r\n\032\032quit\r\n$gdb_prompt$" \ + { pass "annotate-quit" } + -re ".*$gdb_prompt$" { fail "annotate-quit" } + timeout { fail "annotate-quit (timeout)" } +} + +# +# FIXME: the testsuite does not currently have tests for +# annotate_catchpoints and annotate_function_call +# and a few variants of the annotations that are +# tested (marked by FIXME on the annot?.exp files) +# + +# reinstall the old prompt for the rest of the testsuite. + +set gdb_prompt $old_gdb_prompt -- 2.11.0