From 9e34c8ba91697cb7441805c36d92ab3e695df6e0 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Jan=20H=C3=B6ppner?= Date: Thu, 8 Oct 2020 15:13:33 +0200 Subject: [PATCH] s390/dasd: Fix operational path inconsistency MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit During online processing and setting up a DASD device, the configuration data for operational paths is read and validated two times (dasd_eckd_read_conf()). The first time to provide information that are necessary for the LCU setup. A second time after the LCU setup as a device might report different configuration data then. When the configuration setup for each operational path is being validated, an initial call to dasd_eckd_clear_conf_data() is issued. This call wipes all previously available configuration data and path information for each path. However, the operational path mask is not updated during this process. As a result, the stored operational path mask might no longer correspond to the operational paths mask reported by the CIO layer, as several paths might be gone between the two dasd_eckd_read_conf() calls. This inconsistency leads to more severe issues in later path handling changes. Fix this by removing the channel paths from the operational path mask during the dasd_eckd_clear_conf_data() call. Signed-off-by: Jan Höppner Signed-off-by: Stefan Haberland Reviewed-by: Stefan Haberland Reviewed-by: Cornelia Huck Signed-off-by: Jens Axboe --- drivers/s390/block/dasd_eckd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 3ff7b532a5bf..3273b26b25b0 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -1034,6 +1034,7 @@ static void dasd_eckd_clear_conf_data(struct dasd_device *device) device->path[i].cssid = 0; device->path[i].ssid = 0; device->path[i].chpid = 0; + dasd_path_notoper(device, i); } } -- 2.11.0