From a18004173a087573628ddc9910f0665a3829f48f Mon Sep 17 00:00:00 2001
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Wed, 2 Nov 2022 00:43:27 +0000
Subject: [PATCH] media: dt-bindings: Document Renesas RZ/G2L CRU block

Document the CRU block found on Renesas RZ/G2L (and alike) SoCs.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
---
 .../bindings/media/renesas,rzg2l-cru.yaml          | 157 +++++++++++++++++++++
 1 file changed, 157 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml

diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
new file mode 100644
index 000000000000..7dde7967c886
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) Camera Data Receiving Unit (CRU) Image processing
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  The CRU image processing module is a data conversion module equipped with pixel
+  color space conversion, LUT, pixel format conversion, etc. An MIPI CSI-2 input and
+  parallel (including ITU-R BT.656) input are provided as the image sensor interface.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-cru       # RZ/G2{L,LC}
+          - renesas,r9a07g054-cru       # RZ/V2L
+      - const: renesas,rzg2l-cru
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: image_conv
+      - const: image_conv_err
+      - const: axi_mst_err
+
+  clocks:
+    items:
+      - description: CRU Main clock
+      - description: CRU Register access clock
+      - description: CRU image transfer clock
+
+  clock-names:
+    items:
+      - const: video
+      - const: apb
+      - const: axi
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: CRU_PRESETN reset terminal
+      - description: CRU_ARESETN reset terminal
+
+  reset-names:
+    items:
+      - const: presetn
+      - const: aresetn
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing a parallel input source.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              hsync-active: true
+              vsync-active: true
+              bus-width: true
+              data-shift: true
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port node, describing the Image Processing module connected to the
+          CSI-2 receiver.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  # Device node example with CSI-2
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cru: video@10830000 {
+        compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
+        reg = <0x10830000 0x400>;
+        interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
+        clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
+                 <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
+        clock-names = "video", "apb", "axi";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_CRU_PRESETN>,
+                 <&cpg R9A07G044_CRU_ARESETN>;
+        reset-names = "presetn", "aresetn";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                cru_parallel_in: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint= <&ov5642>;
+                    hsync-active = <1>;
+                    vsync-active = <1>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                cru_csi_in: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint= <&csi_cru_in>;
+                };
+            };
+        };
+    };
-- 
2.11.0