From a3613be442aaf435d7d3b224c81cea0b0f702d6a Mon Sep 17 00:00:00 2001 From: Ganesan Ramalingam Date: Wed, 7 Jan 2015 16:58:27 +0530 Subject: [PATCH] MIPS: Netlogic: Fix frequency calculation register Change the PIC frequency calculation to use the register that has the current configuration. The existing code used the register that is written to change frequency, which can have an invalid value if the firmware did not set it up correctly. Signed-off-by: Ganesan Ramalingam Signed-off-by: Jayachandran C Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8885/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/netlogic/xlp-hal/sys.h | 3 +++ arch/mips/netlogic/xlp/nlm_hal.c | 8 ++++---- 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/mips/include/asm/netlogic/xlp-hal/sys.h b/arch/mips/include/asm/netlogic/xlp-hal/sys.h index bc7bddf25be9..6bcf3952e556 100644 --- a/arch/mips/include/asm/netlogic/xlp-hal/sys.h +++ b/arch/mips/include/asm/netlogic/xlp-hal/sys.h @@ -177,6 +177,9 @@ #define SYS_9XX_CLK_DEV_DIV 0x18d #define SYS_9XX_CLK_DEV_CHG 0x18f +#define SYS_9XX_CLK_DEV_SEL_REG 0x1a4 +#define SYS_9XX_CLK_DEV_DIV_REG 0x1a6 + /* Registers changed on 9XX */ #define SYS_9XX_POWER_ON_RESET_CFG 0x00 #define SYS_9XX_CHIP_RESET 0x01 diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c index de41fb5dec4c..b80d893da9ad 100644 --- a/arch/mips/netlogic/xlp/nlm_hal.c +++ b/arch/mips/netlogic/xlp/nlm_hal.c @@ -332,7 +332,7 @@ static unsigned int nlm_xlp2_get_pic_frequency(int node) /* Find the clock source PLL device for PIC */ if (cpu_xlp9xx) { reg_select = nlm_read_sys_reg(clockbase, - SYS_9XX_CLK_DEV_SEL) & 0x3; + SYS_9XX_CLK_DEV_SEL_REG) & 0x3; switch (reg_select) { case 0: ctrl_val0 = nlm_read_sys_reg(clockbase, @@ -361,7 +361,7 @@ static unsigned int nlm_xlp2_get_pic_frequency(int node) } } else { reg_select = (nlm_read_sys_reg(sysbase, - SYS_CLK_DEV_SEL) >> 22) & 0x3; + SYS_CLK_DEV_SEL_REG) >> 22) & 0x3; switch (reg_select) { case 0: ctrl_val0 = nlm_read_sys_reg(sysbase, @@ -425,10 +425,10 @@ static unsigned int nlm_xlp2_get_pic_frequency(int node) /* PIC post divider, which happens after PLL */ if (cpu_xlp9xx) pic_div = nlm_read_sys_reg(clockbase, - SYS_9XX_CLK_DEV_DIV) & 0x3; + SYS_9XX_CLK_DEV_DIV_REG) & 0x3; else pic_div = (nlm_read_sys_reg(sysbase, - SYS_CLK_DEV_DIV) >> 22) & 0x3; + SYS_CLK_DEV_DIV_REG) >> 22) & 0x3; do_div(pll_out_freq_num, 1 << pic_div); return pll_out_freq_num; -- 2.11.0