From a63674c7cfe62221e05ba73107d9e15d73ff8bbd Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 29 May 2020 13:13:00 +0200 Subject: [PATCH] mtd: rawnand: Reorganize the nand_chip structure Reorder fields in this structure and pack entries by theme: * The main descriptive structures * The data interface details * Bad block information * The device layout * Extra buffers matching the device layout * Internal values * External objects like the ECC controller, the ECC engine and a private data pointer. While at it, adapt the documentation style. I changed on purpose the description of @oob_poi which was weird. Signed-off-by: Miquel Raynal Reviewed-by: Boris Brezillon Link: https://lore.kernel.org/linux-mtd/20200529111322.7184-7-miquel.raynal@bootlin.com --- include/linux/mtd/rawnand.h | 166 ++++++++++++++++++++------------------------ 1 file changed, 76 insertions(+), 90 deletions(-) diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index a3dfa36a9fd5..544ec8736793 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -1055,120 +1055,106 @@ struct nand_manufacturer { /** * struct nand_chip - NAND Private Flash Chip Data - * @base: Inherit from the generic NAND device - * @ops: NAND chip operations - * @manufacturer: Manufacturer information - * @legacy: All legacy fields/hooks. If you develop a new driver, - * don't even try to use any of these fields/hooks, and if - * you're modifying an existing driver that is using those - * fields/hooks, you should consider reworking the driver - * avoid using them. - * @ecc: [BOARDSPECIFIC] ECC control structure - * @buf_align: minimum buffer alignment required by a platform - * @oob_poi: "poison value buffer," used for laying out OOB data - * before writing - * @page_shift: [INTERN] number of address bits in a page (column - * address bits). - * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock - * @bbt_erase_shift: [INTERN] number of address bits in a bbt entry - * @chip_shift: [INTERN] number of address bits in one chip - * @options: [BOARDSPECIFIC] various chip options. They can partly - * be set to inform nand_scan about special functionality. - * See the defines for further explanation. - * @bbt_options: [INTERN] bad block specific options. All options used - * here must come from bbm.h. By default, these options - * will be copied to the appropriate nand_bbt_descr's. - * @badblockpos: [INTERN] position of the bad block marker in the oob - * area. - * @badblockbits: [INTERN] minimum number of set bits in a good block's - * bad block marker position; i.e., BBM == 11110111b is - * not bad when badblockbits == 7 - * @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is - * set to the actually used ONFI mode if the chip is - * ONFI compliant or deduced from the datasheet if - * the NAND chip is not ONFI compliant. - * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 - * @data_buf: [INTERN] buffer for data, size is (page size + oobsize). - * @pagecache: Structure containing page cache related fields - * @pagecache.bitflips: Number of bitflips of the cached page - * @pagecache.page: Page number currently in the cache. -1 means no page is - * currently cached - * @subpagesize: [INTERN] holds the subpagesize - * @id: [INTERN] holds NAND ID - * @parameters: [INTERN] holds generic parameters under an easily - * readable form. - * @data_interface: [INTERN] NAND interface timing information - * @cur_cs: currently selected target. -1 means no target selected, - * otherwise we should always have cur_cs >= 0 && - * cur_cs < nanddev_ntargets(). NAND Controller drivers - * should not modify this value, but they're allowed to - * read it. - * @read_retries: [INTERN] the number of read retry modes supported - * @lock: lock protecting the suspended field. Also used to - * serialize accesses to the NAND device. - * @suspended: set to 1 when the device is suspended, 0 when it's not. - * @bbt: [INTERN] bad block table pointer - * @bbt_td: [REPLACEABLE] bad block table descriptor for flash - * lookup. - * @bbt_md: [REPLACEABLE] bad block table mirror descriptor - * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial - * bad block scan. - * @controller: [REPLACEABLE] a pointer to a hardware controller - * structure which is shared among multiple independent - * devices. - * @priv: [OPTIONAL] pointer to private chip data + * @base: Inherit from the generic NAND device + * @id: Holds NAND ID + * @parameters: Holds generic parameters under an easily readable form + * @manufacturer: Manufacturer information + * @ops: NAND chip operations + * @legacy: All legacy fields/hooks. If you develop a new driver, don't even try + * to use any of these fields/hooks, and if you're modifying an + * existing driver that is using those fields/hooks, you should + * consider reworking the driver and avoid using them. + * @options: Various chip options. They can partly be set to inform nand_scan + * about special functionality. See the defines for further + * explanation. + * @onfi_timing_mode_default: Default ONFI timing mode. This field is set to the + * actually used ONFI mode if the chip is ONFI + * compliant or deduced from the datasheet otherwise + * @data_interface: NAND interface timing information + * @bbt_erase_shift: Number of address bits in a bbt entry + * @bbt_options: Bad block table specific options. All options used here must + * come from bbm.h. By default, these options will be copied to + * the appropriate nand_bbt_descr's. + * @badblockpos: Bad block marker position in the oob area + * @badblockbits: Minimum number of set bits in a good block's bad block marker + * position; i.e., BBM = 11110111b is good when badblockbits = 7 + * @bbt_td: Bad block table descriptor for flash lookup + * @bbt_md: Bad block table mirror descriptor + * @badblock_pattern: Bad block scan pattern used for initial bad block scan + * @bbt: Bad block table pointer + * @page_shift: Number of address bits in a page (column address bits) + * @phys_erase_shift: Number of address bits in a physical eraseblock + * @chip_shift: Number of address bits in one chip + * @pagemask: Page number mask = number of (pages / chip) - 1 + * @subpagesize: Holds the subpagesize + * @data_buf: Buffer for data, size is (page size + oobsize) + * @oob_poi: pointer on the OOB area covered by data_buf + * @pagecache: Structure containing page cache related fields + * @pagecache.bitflips: Number of bitflips of the cached page + * @pagecache.page: Page number currently in the cache. -1 means no page is + * currently cached + * @buf_align: Minimum buffer alignment required by a platform + * @lock: Lock protecting the suspended field. Also used to serialize accesses + * to the NAND device + * @suspended: Set to 1 when the device is suspended, 0 when it's not + * @cur_cs: Currently selected target. -1 means no target selected, otherwise we + * should always have cur_cs >= 0 && cur_cs < nanddev_ntargets(). + * NAND Controller drivers should not modify this value, but they're + * allowed to read it. + * @read_retries: The number of read retry modes supported + * @controller: The hardware controller structure which is shared among multiple + * independent devices + * @ecc: The ECC controller structure + * @priv: Chip private data */ - struct nand_chip { struct nand_device base; + struct nand_id id; + struct nand_parameters parameters; struct nand_manufacturer manufacturer; struct nand_chip_ops ops; struct nand_legacy legacy; - unsigned int options; + + /* Data interface */ + int onfi_timing_mode_default; + struct nand_data_interface data_interface; + + /* Bad block information */ + unsigned int bbt_erase_shift; unsigned int bbt_options; + unsigned int badblockpos; + unsigned int badblockbits; + struct nand_bbt_descr *bbt_td; + struct nand_bbt_descr *bbt_md; + struct nand_bbt_descr *badblock_pattern; + u8 *bbt; + /* Device internal layout */ unsigned int page_shift; unsigned int phys_erase_shift; - unsigned int bbt_erase_shift; unsigned int chip_shift; unsigned int pagemask; - u8 *data_buf; + unsigned int subpagesize; + /* Buffers */ + u8 *data_buf; + u8 *oob_poi; struct { unsigned int bitflips; int page; } pagecache; + unsigned long buf_align; - unsigned int subpagesize; - int onfi_timing_mode_default; - unsigned int badblockpos; - unsigned int badblockbits; - - struct nand_id id; - struct nand_parameters parameters; - - struct nand_data_interface data_interface; - - int cur_cs; - - int read_retries; - + /* Internals */ struct mutex lock; unsigned int suspended : 1; + int cur_cs; + int read_retries; - u8 *oob_poi; + /* Externals */ struct nand_controller *controller; - struct nand_ecc_ctrl ecc; - unsigned long buf_align; - - u8 *bbt; - struct nand_bbt_descr *bbt_td; - struct nand_bbt_descr *bbt_md; - - struct nand_bbt_descr *badblock_pattern; - void *priv; }; -- 2.11.0