From a649277e79a5c28a94d258b5579b62daaf5ffd6d Mon Sep 17 00:00:00 2001 From: Simon Baatz Date: Tue, 4 Jun 2013 23:32:32 +0200 Subject: [PATCH] arm: kirkwood: sheevaplug: move pinmux configs to the right devices When the pinmux mechanism was added in Kirkwood, the device driver core was not yet providing the possibility of attaching pinmux configurations to all devices, drivers had to do it explicitly, and not all drivers were doing this. Now that the driver core does that in a generic way, it makes sense to attach the pinmux configuration to their corresponding devices. Signed-off-by: Simon Baatz Reviewed-by: Thomas Petazzoni Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi | 16 ++++++---------- arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts | 21 ++++++++++++--------- arch/arm/boot/dts/kirkwood-sheevaplug.dts | 18 ++++++++---------- 3 files changed, 26 insertions(+), 29 deletions(-) diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi index 9d5947599694..f7143f128504 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi @@ -44,10 +44,14 @@ }; }; serial@12000 { + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; status = "okay"; }; nand@3000000 { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; status = "okay"; partition@0 { @@ -71,6 +75,8 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power_enable>; + pinctrl-names = "default"; usb_power: regulator@1 { compatible = "regulator-fixed"; @@ -84,14 +90,4 @@ gpio = <&gpio0 29 0>; }; }; - - gpio-leds { - compatible = "gpio-leds"; - - health { - label = "sheevaplug:blue:health"; - gpios = <&gpio1 17 1>; - linux,default-trigger = "default-on"; - }; - }; }; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts index 1c6946a62aa9..f620ce48de97 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts @@ -15,15 +15,6 @@ compatible = "globalscale,sheevaplug-esata-rev13", "globalscale,sheevaplug-esata", "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; ocp@f1000000 { - pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_nand &pmx_uart0 - &pmx_usb_power_enable - &pmx_led_blue>; - pinctrl-names = "default"; - - }; - sata@80000 { status = "okay"; nr-ports = <2>; @@ -37,4 +28,16 @@ wp-gpios = <&gpio1 15 0>; }; }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_blue>; + pinctrl-names = "default"; + + health { + label = "sheevaplug:blue:health"; + gpios = <&gpio1 17 1>; + linux,default-trigger = "default-on"; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts index f7684066f0ce..bf1dff251432 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts +++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts @@ -15,16 +15,6 @@ compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; ocp@f1000000 { - pinctrl: pinctrl@10000 { - - pinctrl-0 = < &pmx_nand &pmx_uart0 - &pmx_usb_power_enable - &pmx_led_red - &pmx_led_blue>; - pinctrl-names = "default"; - - }; - mvsdio@90000 { pinctrl-0 = <&pmx_sdio>; pinctrl-names = "default"; @@ -36,6 +26,14 @@ gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_blue &pmx_led_red>; + pinctrl-names = "default"; + + health { + label = "sheevaplug:blue:health"; + gpios = <&gpio1 17 1>; + linux,default-trigger = "default-on"; + }; misc { label = "sheevaplug:red:misc"; -- 2.11.0