From a746fadd5e3187b814a66769355adcc9524839e6 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Wed, 20 Dec 2017 18:45:10 -0600 Subject: [PATCH] net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround [ Upstream commit c1a8d0a3accf64a014d605e6806ce05d1c17adf1 ] Under some circumstances driver will perform PHY reset in ksz9031_read_status() to fix autoneg failure case (idle error count = 0xFF). When this happens ksz9031 will not detect link status change any more when connecting to Netgear 1G switch (link can be recovered sometimes by restarting netdevice "ifconfig down up"). Reproduced with TI am572x board equipped with ksz9031 PHY while connecting to Netgear 1G switch. Fix the issue by reconfiguring autonegotiation after PHY reset in ksz9031_read_status(). Fixes: d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg") Signed-off-by: Grygorii Strashko Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/phy/micrel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index fbf5945ce00d..2032a6de026b 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -624,6 +624,7 @@ static int ksz9031_read_status(struct phy_device *phydev) phydev->link = 0; if (phydev->drv->config_intr && phy_interrupt_is_valid(phydev)) phydev->drv->config_intr(phydev); + return genphy_config_aneg(phydev); } return 0; -- 2.11.0