From aafc66f106c03336e6e4ab9fd741c2b33110b7be Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 10 Jun 2015 18:08:01 -0700 Subject: [PATCH] net: dsa: bcm_sf2: Utilize BRCM_PSEUDO_PHY_ADDR Utilize the newly introduced BRCM_PSEUDO_PHY_ADDR constant from brcmphy.h instead of open-coding the Broadcom Ethernet switches pseudo-PHY address (30). Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 103fde3da476..972982f8bea7 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -24,6 +24,7 @@ #include #include #include +#include #include "bcm_sf2.h" #include "bcm_sf2_regs.h" @@ -697,7 +698,7 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds) /* Include the pseudo-PHY address and the broadcast PHY address to * divert reads towards our workaround */ - ds->phys_mii_mask |= ((1 << 30) | (1 << 0)); + ds->phys_mii_mask |= ((1 << BRCM_PSEUDO_PHY_ADDR) | (1 << 0)); rev = reg_readl(priv, REG_SWITCH_REVISION); priv->hw_params.top_rev = (rev >> SWITCH_TOP_REV_SHIFT) & @@ -782,7 +783,7 @@ static int bcm_sf2_sw_phy_read(struct dsa_switch *ds, int addr, int regnum) */ switch (addr) { case 0: - case 30: + case BRCM_PSEUDO_PHY_ADDR: return bcm_sf2_sw_indir_rw(ds, 1, addr, regnum, 0); default: return 0xffff; @@ -797,7 +798,7 @@ static int bcm_sf2_sw_phy_write(struct dsa_switch *ds, int addr, int regnum, */ switch (addr) { case 0: - case 30: + case BRCM_PSEUDO_PHY_ADDR: bcm_sf2_sw_indir_rw(ds, 0, addr, regnum, val); break; } -- 2.11.0