From afed4ccb0d975f1d3c98880ecf19a24f3d842394 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Sun, 17 Oct 2010 01:48:59 +0000 Subject: [PATCH] b44: fix resume, request_irq after hw reset On resume, call request_irq() after resetting the hardware rather than before. It's a shared interrupt so the handler could be called immediately if another device on the same irq interrupts (and will be called immediately if CONFIG_DEBUG_SHIRQ=y), but unless the hardware is reinitialised with b44_init_hw() the read of the interrupt status register will hang the system. Signed-off-by: James Hogan Signed-off-by: David S. Miller --- drivers/net/b44.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 8e7c8a8e61c7..171da7f75108 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -2296,18 +2296,27 @@ static int b44_resume(struct ssb_device *sdev) if (!netif_running(dev)) return 0; + spin_lock_irq(&bp->lock); + b44_init_rings(bp); + b44_init_hw(bp, B44_FULL_RESET); + spin_unlock_irq(&bp->lock); + + /* + * As a shared interrupt, the handler can be called immediately. To be + * able to check the interrupt status the hardware must already be + * powered back on (b44_init_hw). + */ rc = request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, dev); if (rc) { netdev_err(dev, "request_irq failed\n"); + spin_lock_irq(&bp->lock); + b44_halt(bp); + b44_free_rings(bp); + spin_unlock_irq(&bp->lock); return rc; } - spin_lock_irq(&bp->lock); - - b44_init_rings(bp); - b44_init_hw(bp, B44_FULL_RESET); netif_device_attach(bp->dev); - spin_unlock_irq(&bp->lock); b44_enable_ints(bp); netif_wake_queue(dev); -- 2.11.0