From b0b7aa407e929b8e25a2982bff428eacd50f1630 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Tue, 19 Jun 2018 10:19:25 +0200 Subject: [PATCH] dt-bindings: display: Add DT bindings for BOE HV070WSA-100 panel The patch adds bindings to BOE HV070-WSA WSVGA panel. Bindings are compatible with simple panel bindings. Signed-off-by: Andrzej Hajda Signed-off-by: Maciej Purski Reviewed-by: Rob Herring Signed-off-by: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/1529396370-18761-5-git-send-email-m.purski@samsung.com --- .../bindings/display/panel/boe,hv070wsa-100.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt diff --git a/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt new file mode 100644 index 000000000000..55183d360032 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt @@ -0,0 +1,28 @@ +BOE HV070WSA-100 7.01" WSVGA TFT LCD panel + +Required properties: +- compatible: should be "boe,hv070wsa-100" +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) +- enable-gpios: GPIO pin to enable and disable panel (active high) + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in [1]. This +node should describe panel's video bus. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + panel: panel { + compatible = "boe,hv070wsa-100"; + power-supply = <&vcc_3v3_reg>; + enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>; + port { + panel_ep: endpoint { + remote-endpoint = <&bridge_out_ep>; + }; + }; + }; -- 2.11.0