From b3864cedfb576e11d2f9274f14a24840d8b569c3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 19 Jul 2010 09:40:43 +0100 Subject: [PATCH] USB: s3c-hsotg: Re-initialise all FIFOs on USB bus reset The USB documentation suggest that the FIFOs should be reset when a bus reset event happens. Use the s3c_hsotg_init_fifo() to ensure that the FIFO layout is correct and that the FIFOs are flushed before acknowledging the reset. Signed-off-by: Ben Dooks Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/s3c-hsotg.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 354fd456f8cc..9d32c9ff737d 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2082,17 +2082,12 @@ irq_retry: kill_all_requests(hsotg, &hsotg->eps[0], -ECONNRESET, true); /* it seems after a reset we can end up with a situation - * where the TXFIFO still has data in it... try flushing - * it to remove anything that may still be in it. + * where the TXFIFO still has data in it... the docs + * suggest resetting all the fifos, so use the init_fifo + * code to relayout and flush the fifos. */ - if (1) { - writel(S3C_GRSTCTL_TxFNum(0) | S3C_GRSTCTL_TxFFlsh, - hsotg->regs + S3C_GRSTCTL); - - dev_info(hsotg->dev, "GNPTXSTS=%08x\n", - readl(hsotg->regs + S3C_GNPTXSTS)); - } + s3c_hsotg_init_fifo(hsotg); s3c_hsotg_enqueue_setup(hsotg); -- 2.11.0