From b5018be6d5dd9dd257bf8236298daac8b1262750 Mon Sep 17 00:00:00 2001 From: Jeroen Hofstee Date: Tue, 24 Sep 2019 18:46:06 +0000 Subject: [PATCH] can: ti_hecc: add missing state changes While the ti_hecc has interrupts to report when the error counters increase to a certain level and which change state it doesn't handle the case that the error counters go down again, so the reported state can actually be wrong. Since there is no interrupt for that, do update state based on the error counters, when the state is not error active and goes down again. Signed-off-by: Jeroen Hofstee Signed-off-by: Marc Kleine-Budde --- drivers/net/can/ti_hecc.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c index 4c6d3ce0e8c4..31ad364a89bb 100644 --- a/drivers/net/can/ti_hecc.c +++ b/drivers/net/can/ti_hecc.c @@ -711,6 +711,23 @@ static irqreturn_t ti_hecc_interrupt(int irq, void *dev_id) can_bus_off(ndev); ti_hecc_change_state(ndev, rx_state, tx_state); } + } else if (unlikely(priv->can.state != CAN_STATE_ERROR_ACTIVE)) { + enum can_state new_state, tx_state, rx_state; + u32 rec = hecc_read(priv, HECC_CANREC); + u32 tec = hecc_read(priv, HECC_CANTEC); + + if (rec >= 128 || tec >= 128) + new_state = CAN_STATE_ERROR_PASSIVE; + else if (rec >= 96 || tec >= 96) + new_state = CAN_STATE_ERROR_WARNING; + else + new_state = CAN_STATE_ERROR_ACTIVE; + + if (new_state < priv->can.state) { + rx_state = rec >= tec ? new_state : 0; + tx_state = rec <= tec ? new_state : 0; + ti_hecc_change_state(ndev, rx_state, tx_state); + } } if (int_status & HECC_CANGIF_GMIF) { -- 2.11.0