From b6dc71f38a84e36c5445b95f9f7a2dac6b25636f Mon Sep 17 00:00:00 2001 From: Vandana Kannan Date: Wed, 13 May 2015 12:18:52 +0530 Subject: [PATCH] drm/i915/bxt: Port PLL programming BUN BUN 1: prop_coeff, int_coeff, tdctargetcnt programming updated and tied to VCO frequencies. Program i_lockthresh in PORT_PLL_9. VCO calculated based on the formula: Desired Output = Port bit rate in MHz (DisplayPort HBR2 is 5400 MHz) Fast Clock = Desired Output / 2 VCO = Fast Clock * P1 * P2 Prop_coeff, int_coeff, and tdctargetcnt modified according to above calculation. BUN 2: Port PLLs require additional programming at certain frequencies - DCO amplitude in PORT_PLL_10 Review comments from Siva which were addressed in the initial version of the patch. - Change PORT_PLL_LOCK_THRESHOLD to PORT_PLL_LOCK_THRESHOLD_MASK - Calculate for HDMI - Correct values for vco = 5.4 - return in case of invalid vco range v2: Imre's review comments addressed - change dcoampovr_en to dcoampovr_en_h - change PORT_PLL_DCO_AMP_OVR_EN to PORT_PLL_DCO_AMP_OVR_EN_H - Correct lane stagger value for 324MHz - Make coef common for HDMI and DP - remove superfluous comments v3: Imre's comments addressed - Remove Prop_coeff, int_coeff, tdctargetcnt, dcoampovr_en, gain_ctl, dcoampovr_en_h from bxt_clk_div and make them local variables. Signed-off-by: Vandana Kannan Reviewed-by: Sivakumar Thulasimani [v1] Cc: Sivakumar Thulasimani Reviewed-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 2 +- drivers/gpu/drm/i915/i915_reg.h | 6 +++ drivers/gpu/drm/i915/intel_ddi.c | 79 ++++++++++++++++++++++++++++------------ 3 files changed, 63 insertions(+), 24 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 11e0059abd2c..840f08fa5fb3 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -309,7 +309,7 @@ struct intel_dpll_hw_state { uint32_t cfgcr1, cfgcr2; /* bxt */ - uint32_t ebb0, pll0, pll1, pll2, pll3, pll6, pll8, pcsdw12; + uint32_t ebb0, pll0, pll1, pll2, pll3, pll6, pll8, pll10, pcsdw12; }; struct intel_shared_dpll_config { diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 344d132c51ae..04b9f2b4c042 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1204,6 +1204,12 @@ enum skl_disp_power_wells { #define PORT_PLL_GAIN_CTL(x) ((x) << 16) /* PORT_PLL_8_A */ #define PORT_PLL_TARGET_CNT_MASK 0x3FF +/* PORT_PLL_9_A */ +#define PORT_PLL_LOCK_THRESHOLD_MASK 0xe +/* PORT_PLL_10_A */ +#define PORT_PLL_DCO_AMP_OVR_EN_H (1<<27) +#define PORT_PLL_DCO_AMP_MASK 0x3c00 +#define PORT_PLL_DCO_AMP(x) (x<<10) #define _PORT_PLL_BASE(port) _PORT3(port, _PORT_PLL_0_A, \ _PORT_PLL_0_B, \ _PORT_PLL_0_C) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index c82c981758ec..d2a8c640782f 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1340,22 +1340,18 @@ struct bxt_clk_div { uint32_t m2_frac; bool m2_frac_en; uint32_t n; - uint32_t prop_coef; - uint32_t int_coef; - uint32_t gain_ctl; - uint32_t targ_cnt; uint32_t lanestagger; }; /* pre-calculated values for DP linkrates */ static struct bxt_clk_div bxt_dp_clk_val[7] = { - /* 162 */ {4, 2, 32, 1677722, 1, 1, 5, 11, 2, 9, 0xd}, - /* 270 */ {4, 1, 27, 0, 0, 1, 3, 8, 1, 9, 0xd}, - /* 540 */ {2, 1, 27, 0, 0, 1, 3, 8, 1, 9, 0x18}, - /* 216 */ {3, 2, 32, 1677722, 1, 1, 5, 11, 2, 9, 0xd}, - /* 243 */ {4, 1, 24, 1258291, 1, 1, 5, 11, 2, 9, 0xd}, - /* 324 */ {4, 1, 32, 1677722, 1, 1, 5, 11, 2, 9, 0xd}, - /* 432 */ {3, 1, 32, 1677722, 1, 1, 5, 11, 2, 9, 0x18} + /* 162 */ {4, 2, 32, 1677722, 1, 1, 0xd}, + /* 270 */ {4, 1, 27, 0, 0, 1, 0xd}, + /* 540 */ {2, 1, 27, 0, 0, 1, 0x18}, + /* 216 */ {3, 2, 32, 1677722, 1, 1, 0xd}, + /* 243 */ {4, 1, 24, 1258291, 1, 1, 0xd}, + /* 324 */ {4, 1, 32, 1677722, 1, 1, 0x18}, + /* 432 */ {3, 1, 32, 1677722, 1, 1, 0x18} }; static bool @@ -1366,6 +1362,9 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc, { struct intel_shared_dpll *pll; struct bxt_clk_div clk_div = {0}; + int vco = 0; + uint32_t prop_coef, int_coef, gain_ctl, targ_cnt; + uint32_t dcoampovr_en_h, dco_amp; if (intel_encoder->type == INTEL_OUTPUT_HDMI) { intel_clock_t best_clock; @@ -1389,11 +1388,7 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc, clk_div.m2_frac = best_clock.m2 & ((1 << 22) - 1); clk_div.m2_frac_en = clk_div.m2_frac != 0; - /* FIXME: set coef, gain, targcnt based on freq band */ - clk_div.prop_coef = 5; - clk_div.int_coef = 11; - clk_div.gain_ctl = 2; - clk_div.targ_cnt = 9; + vco = best_clock.vco; if (clock > 270000) clk_div.lanestagger = 0x18; else if (clock > 135000) @@ -1423,6 +1418,32 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc, clk_div = bxt_dp_clk_val[0]; DRM_ERROR("Unknown link rate\n"); } + vco = clock * 10 / 2 * clk_div.p1 * clk_div.p2; + } + + dco_amp = 15; + dcoampovr_en_h = 0; + if (vco >= 6200000 && vco <= 6480000) { + prop_coef = 4; + int_coef = 9; + gain_ctl = 3; + targ_cnt = 8; + } else if ((vco > 5400000 && vco < 6200000) || + (vco >= 4800000 && vco < 5400000)) { + prop_coef = 5; + int_coef = 11; + gain_ctl = 3; + targ_cnt = 9; + if (vco >= 4800000 && vco < 5400000) + dcoampovr_en_h = 1; + } else if (vco == 5400000) { + prop_coef = 3; + int_coef = 8; + gain_ctl = 1; + targ_cnt = 9; + } else { + DRM_ERROR("Invalid VCO\n"); + return false; } memset(&crtc_state->dpll_hw_state, 0, @@ -1439,11 +1460,16 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc, PORT_PLL_M2_FRAC_ENABLE; crtc_state->dpll_hw_state.pll6 = - clk_div.prop_coef | PORT_PLL_INT_COEFF(clk_div.int_coef); + prop_coef | PORT_PLL_INT_COEFF(int_coef); crtc_state->dpll_hw_state.pll6 |= - PORT_PLL_GAIN_CTL(clk_div.gain_ctl); + PORT_PLL_GAIN_CTL(gain_ctl); + + crtc_state->dpll_hw_state.pll8 = targ_cnt; - crtc_state->dpll_hw_state.pll8 = clk_div.targ_cnt; + if (dcoampovr_en_h) + crtc_state->dpll_hw_state.pll10 = PORT_PLL_DCO_AMP_OVR_EN_H; + + crtc_state->dpll_hw_state.pll10 |= PORT_PLL_DCO_AMP(dco_amp); crtc_state->dpll_hw_state.pcsdw12 = LANESTAGGER_STRAP_OVRD | clk_div.lanestagger; @@ -2376,10 +2402,16 @@ static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv, temp |= pll->config.hw_state.pll8; I915_WRITE(BXT_PORT_PLL(port, 8), temp); - /* - * FIXME: program PORT_PLL_9/i_lockthresh according to the latest - * specification update. - */ + temp = I915_READ(BXT_PORT_PLL(port, 9)); + temp &= ~PORT_PLL_LOCK_THRESHOLD_MASK; + temp |= (5 << 1); + I915_WRITE(BXT_PORT_PLL(port, 9), temp); + + temp = I915_READ(BXT_PORT_PLL(port, 10)); + temp &= ~PORT_PLL_DCO_AMP_OVR_EN_H; + temp &= ~PORT_PLL_DCO_AMP_MASK; + temp |= pll->config.hw_state.pll10; + I915_WRITE(BXT_PORT_PLL(port, 10), temp); /* Recalibrate with new settings */ temp = I915_READ(BXT_PORT_PLL_EBB_4(port)); @@ -2443,6 +2475,7 @@ static bool bxt_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv, hw_state->pll3 = I915_READ(BXT_PORT_PLL(port, 3)); hw_state->pll6 = I915_READ(BXT_PORT_PLL(port, 6)); hw_state->pll8 = I915_READ(BXT_PORT_PLL(port, 8)); + hw_state->pll10 = I915_READ(BXT_PORT_PLL(port, 10)); /* * While we write to the group register to program all lanes at once we * can read only lane registers. We configure all lanes the same way, so -- 2.11.0