From b838792a624244bbd972ca691c4fd5272ccfdcf8 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 20 Jan 2023 18:31:14 +0100 Subject: [PATCH] arm64: dts: exynos: add VPH_PWR regulator on TM2 VPH_PWR is routed to battery, so it is not configurable. However few devices, e.g. WM5110 expect speaker power supplies, thus provide the regulator for full hardware description. Audio amplifier also accepts that power supply. Keep ordering the nodes by renaming existing IRDA regulator. This fixes dtbs_check warnings: exynos5433-tm2e.dtb: audio-codec@0: 'SPKVDDL-supply' is a required property exynos5433-tm2e.dtb: audio-codec@0: 'SPKVDDR-supply' is a required property Link: https://lore.kernel.org/r/20230120173116.341270-4-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 6f701297a665..3785a6580bdf 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -99,11 +99,18 @@ DIOVDD-supply = <&ldo3_reg>; DVDD-supply = <&ldo3_reg>; - /* PVDD-supply to VPH_PWR */ + PVDD-supply = <&vph_pwr_regulator>; }; }; - irda_regulator: irda-regulator { + vph_pwr_regulator: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "VPH_PWR"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + }; + + irda_regulator: regulator-irda { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>; @@ -1298,6 +1305,8 @@ CPVDD-supply = <&ldo18_reg>; DBVDD2-supply = <&ldo18_reg>; DBVDD3-supply = <&ldo18_reg>; + SPKVDDL-supply = <&vph_pwr_regulator>; + SPKVDDR-supply = <&vph_pwr_regulator>; controller-data { samsung,spi-feedback-delay = <0>; -- 2.11.0