From bb084c0f61d659f0e6d371b096e0e57998f191d6 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 14 Jan 2018 22:07:10 +0100 Subject: [PATCH] backlight: pwm_bl: Don't use GPIOF_* with gpiod_get_direction The documentation was wrong, gpiod_get_direction() returns 0/1 instead of the GPIOF_* flags. The docs were fixed with commit 94fc73094abe47 ("gpio: correct docs about return value of gpiod_get_direction"). Now, fix this user (until a better, system-wide solution is in place). Signed-off-by: Wolfram Sang Acked-by: Daniel Thompson Reviewed-by: Simon Horman Signed-off-by: Lee Jones --- drivers/video/backlight/pwm_bl.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 8e3f1245f5c5..44ac5bde4e9d 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -321,14 +321,14 @@ static int pwm_backlight_probe(struct platform_device *pdev) /* * If the GPIO is not known to be already configured as output, that - * is, if gpiod_get_direction returns either GPIOF_DIR_IN or -EINVAL, - * change the direction to output and set the GPIO as active. + * is, if gpiod_get_direction returns either 1 or -EINVAL, change the + * direction to output and set the GPIO as active. * Do not force the GPIO to active when it was already output as it * could cause backlight flickering or we would enable the backlight too * early. Leave the decision of the initial backlight state for later. */ if (pb->enable_gpio && - gpiod_get_direction(pb->enable_gpio) != GPIOF_DIR_OUT) + gpiod_get_direction(pb->enable_gpio) != 0) gpiod_direction_output(pb->enable_gpio, 1); pb->power_supply = devm_regulator_get(&pdev->dev, "power"); -- 2.11.0