From bd7e5b0899a429445cc6e3037c13f8b5ae3be903 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Fri, 3 Feb 2017 21:18:52 -0800 Subject: [PATCH] KVM: x86: remove code for lazy FPU handling The FPU is always active now when running KVM. Reviewed-by: David Matlack Reviewed-by: Bandan Das Signed-off-by: Paolo Bonzini --- arch/x86/include/asm/kvm_host.h | 3 -- arch/x86/kvm/cpuid.c | 2 - arch/x86/kvm/svm.c | 43 ++------------- arch/x86/kvm/vmx.c | 112 ++++++---------------------------------- arch/x86/kvm/x86.c | 7 +-- include/linux/kvm_host.h | 1 - 6 files changed, 19 insertions(+), 149 deletions(-) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index e4f13e714bcf..74ef58c8ff53 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -55,7 +55,6 @@ #define KVM_REQ_TRIPLE_FAULT 10 #define KVM_REQ_MMU_SYNC 11 #define KVM_REQ_CLOCK_UPDATE 12 -#define KVM_REQ_DEACTIVATE_FPU 13 #define KVM_REQ_EVENT 14 #define KVM_REQ_APF_HALT 15 #define KVM_REQ_STEAL_UPDATE 16 @@ -936,8 +935,6 @@ struct kvm_x86_ops { unsigned long (*get_rflags)(struct kvm_vcpu *vcpu); void (*set_rflags)(struct kvm_vcpu *vcpu, unsigned long rflags); u32 (*get_pkru)(struct kvm_vcpu *vcpu); - void (*fpu_activate)(struct kvm_vcpu *vcpu); - void (*fpu_deactivate)(struct kvm_vcpu *vcpu); void (*tlb_flush)(struct kvm_vcpu *vcpu); diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index c0e2036217ad..1d155cc56629 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -123,8 +123,6 @@ int kvm_update_cpuid(struct kvm_vcpu *vcpu) if (best && (best->eax & (F(XSAVES) | F(XSAVEC)))) best->ebx = xstate_required_size(vcpu->arch.xcr0, true); - kvm_x86_ops->fpu_activate(vcpu); - /* * The existing code assumes virtual address is 48-bit in the canonical * address checks; exit if it is ever changed. diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 4e5905a1ce70..d1efe2c62b3f 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -1157,7 +1157,6 @@ static void init_vmcb(struct vcpu_svm *svm) struct vmcb_control_area *control = &svm->vmcb->control; struct vmcb_save_area *save = &svm->vmcb->save; - svm->vcpu.fpu_active = 1; svm->vcpu.arch.hflags = 0; set_cr_intercept(svm, INTERCEPT_CR0_READ); @@ -1899,15 +1898,12 @@ static void update_cr0_intercept(struct vcpu_svm *svm) ulong gcr0 = svm->vcpu.arch.cr0; u64 *hcr0 = &svm->vmcb->save.cr0; - if (!svm->vcpu.fpu_active) - *hcr0 |= SVM_CR0_SELECTIVE_MASK; - else - *hcr0 = (*hcr0 & ~SVM_CR0_SELECTIVE_MASK) - | (gcr0 & SVM_CR0_SELECTIVE_MASK); + *hcr0 = (*hcr0 & ~SVM_CR0_SELECTIVE_MASK) + | (gcr0 & SVM_CR0_SELECTIVE_MASK); mark_dirty(svm->vmcb, VMCB_CR); - if (gcr0 == *hcr0 && svm->vcpu.fpu_active) { + if (gcr0 == *hcr0) { clr_cr_intercept(svm, INTERCEPT_CR0_READ); clr_cr_intercept(svm, INTERCEPT_CR0_WRITE); } else { @@ -1938,8 +1934,6 @@ static void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0) if (!npt_enabled) cr0 |= X86_CR0_PG | X86_CR0_WP; - if (!vcpu->fpu_active) - cr0 |= X86_CR0_TS; /* * re-enable caching here because the QEMU bios * does not do it - this results in some delay at @@ -2158,22 +2152,6 @@ static int ac_interception(struct vcpu_svm *svm) return 1; } -static void svm_fpu_activate(struct kvm_vcpu *vcpu) -{ - struct vcpu_svm *svm = to_svm(vcpu); - - clr_exception_intercept(svm, NM_VECTOR); - - svm->vcpu.fpu_active = 1; - update_cr0_intercept(svm); -} - -static int nm_interception(struct vcpu_svm *svm) -{ - svm_fpu_activate(&svm->vcpu); - return 1; -} - static bool is_erratum_383(void) { int err, i; @@ -2571,9 +2549,6 @@ static int nested_svm_exit_special(struct vcpu_svm *svm) if (!npt_enabled && svm->apf_reason == 0) return NESTED_EXIT_HOST; break; - case SVM_EXIT_EXCP_BASE + NM_VECTOR: - nm_interception(svm); - break; default: break; } @@ -4018,7 +3993,6 @@ static int (*const svm_exit_handlers[])(struct vcpu_svm *svm) = { [SVM_EXIT_EXCP_BASE + BP_VECTOR] = bp_interception, [SVM_EXIT_EXCP_BASE + UD_VECTOR] = ud_interception, [SVM_EXIT_EXCP_BASE + PF_VECTOR] = pf_interception, - [SVM_EXIT_EXCP_BASE + NM_VECTOR] = nm_interception, [SVM_EXIT_EXCP_BASE + MC_VECTOR] = mc_interception, [SVM_EXIT_EXCP_BASE + AC_VECTOR] = ac_interception, [SVM_EXIT_INTR] = intr_interception, @@ -5072,14 +5046,6 @@ static bool svm_has_wbinvd_exit(void) return true; } -static void svm_fpu_deactivate(struct kvm_vcpu *vcpu) -{ - struct vcpu_svm *svm = to_svm(vcpu); - - set_exception_intercept(svm, NM_VECTOR); - update_cr0_intercept(svm); -} - #define PRE_EX(exit) { .exit_code = (exit), \ .stage = X86_ICPT_PRE_EXCEPT, } #define POST_EX(exit) { .exit_code = (exit), \ @@ -5340,9 +5306,6 @@ static struct kvm_x86_ops svm_x86_ops __ro_after_init = { .get_pkru = svm_get_pkru, - .fpu_activate = svm_fpu_activate, - .fpu_deactivate = svm_fpu_deactivate, - .tlb_flush = svm_flush_tlb, .run = svm_vcpu_run, diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 0e0b5d09597e..9856b73a21ad 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -1856,7 +1856,7 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu) u32 eb; eb = (1u << PF_VECTOR) | (1u << UD_VECTOR) | (1u << MC_VECTOR) | - (1u << NM_VECTOR) | (1u << DB_VECTOR) | (1u << AC_VECTOR); + (1u << DB_VECTOR) | (1u << AC_VECTOR); if ((vcpu->guest_debug & (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP)) == (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP)) @@ -1865,8 +1865,6 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu) eb = ~0; if (enable_ept) eb &= ~(1u << PF_VECTOR); /* bypass_guest_pf = 0 */ - if (vcpu->fpu_active) - eb &= ~(1u << NM_VECTOR); /* When we are running a nested L2 guest and L1 specified for it a * certain exception bitmap, we must trap the same exceptions and pass @@ -2340,25 +2338,6 @@ static void vmx_vcpu_put(struct kvm_vcpu *vcpu) } } -static void vmx_fpu_activate(struct kvm_vcpu *vcpu) -{ - ulong cr0; - - if (vcpu->fpu_active) - return; - vcpu->fpu_active = 1; - cr0 = vmcs_readl(GUEST_CR0); - cr0 &= ~(X86_CR0_TS | X86_CR0_MP); - cr0 |= kvm_read_cr0_bits(vcpu, X86_CR0_TS | X86_CR0_MP); - vmcs_writel(GUEST_CR0, cr0); - update_exception_bitmap(vcpu); - vcpu->arch.cr0_guest_owned_bits = X86_CR0_TS; - if (is_guest_mode(vcpu)) - vcpu->arch.cr0_guest_owned_bits &= - ~get_vmcs12(vcpu)->cr0_guest_host_mask; - vmcs_writel(CR0_GUEST_HOST_MASK, ~vcpu->arch.cr0_guest_owned_bits); -} - static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu); /* @@ -2377,33 +2356,6 @@ static inline unsigned long nested_read_cr4(struct vmcs12 *fields) (fields->cr4_read_shadow & fields->cr4_guest_host_mask); } -static void vmx_fpu_deactivate(struct kvm_vcpu *vcpu) -{ - /* Note that there is no vcpu->fpu_active = 0 here. The caller must - * set this *before* calling this function. - */ - vmx_decache_cr0_guest_bits(vcpu); - vmcs_set_bits(GUEST_CR0, X86_CR0_TS | X86_CR0_MP); - update_exception_bitmap(vcpu); - vcpu->arch.cr0_guest_owned_bits = 0; - vmcs_writel(CR0_GUEST_HOST_MASK, ~vcpu->arch.cr0_guest_owned_bits); - if (is_guest_mode(vcpu)) { - /* - * L1's specified read shadow might not contain the TS bit, - * so now that we turned on shadowing of this bit, we need to - * set this bit of the shadow. Like in nested_vmx_run we need - * nested_read_cr0(vmcs12), but vmcs12->guest_cr0 is not yet - * up-to-date here because we just decached cr0.TS (and we'll - * only update vmcs12->guest_cr0 on nested exit). - */ - struct vmcs12 *vmcs12 = get_vmcs12(vcpu); - vmcs12->guest_cr0 = (vmcs12->guest_cr0 & ~X86_CR0_TS) | - (vcpu->arch.cr0 & X86_CR0_TS); - vmcs_writel(CR0_READ_SHADOW, nested_read_cr0(vmcs12)); - } else - vmcs_writel(CR0_READ_SHADOW, vcpu->arch.cr0); -} - static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu) { unsigned long rflags, save_rflags; @@ -4232,9 +4184,6 @@ static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0) if (enable_ept) ept_update_paging_mode_cr0(&hw_cr0, cr0, vcpu); - if (!vcpu->fpu_active) - hw_cr0 |= X86_CR0_TS | X86_CR0_MP; - vmcs_writel(CR0_READ_SHADOW, cr0); vmcs_writel(GUEST_CR0, hw_cr0); vcpu->arch.cr0 = cr0; @@ -5321,7 +5270,9 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx) /* 22.2.1, 20.8.1 */ vm_entry_controls_init(vmx, vmcs_config.vmentry_ctrl); - vmcs_writel(CR0_GUEST_HOST_MASK, ~0UL); + vmx->vcpu.arch.cr0_guest_owned_bits = X86_CR0_TS; + vmcs_writel(CR0_GUEST_HOST_MASK, ~X86_CR0_TS); + set_cr4_guest_host_mask(vmx); if (vmx_xsaves_supported()) @@ -5425,7 +5376,7 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event) vmx_set_cr0(vcpu, cr0); /* enter rmode */ vmx_set_cr4(vcpu, 0); vmx_set_efer(vcpu, 0); - vmx_fpu_activate(vcpu); + update_exception_bitmap(vcpu); vpid_sync_context(vmx->vpid); @@ -5698,11 +5649,6 @@ static int handle_exception(struct kvm_vcpu *vcpu) if (is_nmi(intr_info)) return 1; /* already handled by vmx_vcpu_run() */ - if (is_no_device(intr_info)) { - vmx_fpu_activate(vcpu); - return 1; - } - if (is_invalid_opcode(intr_info)) { if (is_guest_mode(vcpu)) { kvm_queue_exception(vcpu, UD_VECTOR); @@ -5892,22 +5838,6 @@ static int handle_set_cr4(struct kvm_vcpu *vcpu, unsigned long val) return kvm_set_cr4(vcpu, val); } -/* called to set cr0 as appropriate for clts instruction exit. */ -static void handle_clts(struct kvm_vcpu *vcpu) -{ - if (is_guest_mode(vcpu)) { - /* - * We get here when L2 did CLTS, and L1 didn't shadow CR0.TS - * but we did (!fpu_active). We need to keep GUEST_CR0.TS on, - * just pretend it's off (also in arch.cr0 for fpu_activate). - */ - vmcs_writel(CR0_READ_SHADOW, - vmcs_readl(CR0_READ_SHADOW) & ~X86_CR0_TS); - vcpu->arch.cr0 &= ~X86_CR0_TS; - } else - vmx_set_cr0(vcpu, kvm_read_cr0_bits(vcpu, ~X86_CR0_TS)); -} - static int handle_cr(struct kvm_vcpu *vcpu) { unsigned long exit_qualification, val; @@ -5953,9 +5883,9 @@ static int handle_cr(struct kvm_vcpu *vcpu) } break; case 2: /* clts */ - handle_clts(vcpu); + WARN_ONCE(1, "Guest should always own CR0.TS"); + vmx_set_cr0(vcpu, kvm_read_cr0_bits(vcpu, ~X86_CR0_TS)); trace_kvm_cr_write(0, kvm_read_cr0(vcpu)); - vmx_fpu_activate(vcpu); return kvm_skip_emulated_instruction(vcpu); case 1: /*mov from cr*/ switch (cr) { @@ -10349,8 +10279,8 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12, } /* - * This sets GUEST_CR0 to vmcs12->guest_cr0, with possibly a modified - * TS bit (for lazy fpu) and bits which we consider mandatory enabled. + * This sets GUEST_CR0 to vmcs12->guest_cr0, possibly modifying those + * bits which we consider mandatory enabled. * The CR0_READ_SHADOW is what L2 should have expected to read given * the specifications by L1; It's not enough to take * vmcs12->cr0_read_shadow because on our cr0_guest_host_mask we we @@ -10963,24 +10893,15 @@ static void load_vmcs12_host_state(struct kvm_vcpu *vcpu, vmx_set_rflags(vcpu, X86_EFLAGS_FIXED); /* * Note that calling vmx_set_cr0 is important, even if cr0 hasn't - * actually changed, because it depends on the current state of - * fpu_active (which may have changed). - * Note that vmx_set_cr0 refers to efer set above. + * actually changed, because vmx_set_cr0 refers to efer set above. + * + * CR0_GUEST_HOST_MASK is already set in the original vmcs01 + * (KVM doesn't change it); */ + vcpu->arch.cr0_guest_owned_bits = X86_CR0_TS; vmx_set_cr0(vcpu, vmcs12->host_cr0); - /* - * If we did fpu_activate()/fpu_deactivate() during L2's run, we need - * to apply the same changes to L1's vmcs. We just set cr0 correctly, - * but we also need to update cr0_guest_host_mask and exception_bitmap. - */ - update_exception_bitmap(vcpu); - vcpu->arch.cr0_guest_owned_bits = (vcpu->fpu_active ? X86_CR0_TS : 0); - vmcs_writel(CR0_GUEST_HOST_MASK, ~vcpu->arch.cr0_guest_owned_bits); - /* - * Note that CR4_GUEST_HOST_MASK is already set in the original vmcs01 - * (KVM doesn't change it)- no reason to call set_cr4_guest_host_mask(); - */ + /* Same as above - no reason to call set_cr4_guest_host_mask(). */ vcpu->arch.cr4_guest_owned_bits = ~vmcs_readl(CR4_GUEST_HOST_MASK); kvm_set_cr4(vcpu, vmcs12->host_cr4); @@ -11609,9 +11530,6 @@ static struct kvm_x86_ops vmx_x86_ops __ro_after_init = { .get_pkru = vmx_get_pkru, - .fpu_activate = vmx_fpu_activate, - .fpu_deactivate = vmx_fpu_deactivate, - .tlb_flush = vmx_flush_tlb, .run = vmx_vcpu_run, diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 8d3047c8cce7..c48404017e4f 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6751,10 +6751,6 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu) r = 0; goto out; } - if (kvm_check_request(KVM_REQ_DEACTIVATE_FPU, vcpu)) { - vcpu->fpu_active = 0; - kvm_x86_ops->fpu_deactivate(vcpu); - } if (kvm_check_request(KVM_REQ_APF_HALT, vcpu)) { /* Page is swapped out. Do synthetic halt */ vcpu->arch.apf.halted = true; @@ -6856,8 +6852,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu) preempt_disable(); kvm_x86_ops->prepare_guest_switch(vcpu); - if (vcpu->fpu_active) - kvm_load_guest_fpu(vcpu); + kvm_load_guest_fpu(vcpu); /* * Disable IRQs before setting IN_GUEST_MODE. Posted interrupt diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 2db458ee94b0..8d69d5150748 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -221,7 +221,6 @@ struct kvm_vcpu { struct mutex mutex; struct kvm_run *run; - int fpu_active; int guest_fpu_loaded, guest_xcr0_loaded; struct swait_queue_head wq; struct pid *pid; -- 2.11.0