From bec976b691437d056a92964cb7af07ee1a54221a Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Fri, 5 Nov 2021 13:48:01 -0700 Subject: [PATCH] Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM This adds an admin-guide document for DAMON-based Reclamation. Link: https://lkml.kernel.org/r/20211019150731.16699-16-sj@kernel.org Signed-off-by: SeongJae Park Cc: Amit Shah Cc: Benjamin Herrenschmidt Cc: David Hildenbrand Cc: David Rientjes Cc: David Woodhouse Cc: Greg Thelen Cc: Jonathan Cameron Cc: Jonathan Corbet Cc: Leonard Foerster Cc: Marco Elver Cc: Markus Boehme Cc: Shakeel Butt Cc: Shuah Khan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/admin-guide/mm/damon/index.rst | 1 + Documentation/admin-guide/mm/damon/reclaim.rst | 235 +++++++++++++++++++++++++ 2 files changed, 236 insertions(+) create mode 100644 Documentation/admin-guide/mm/damon/reclaim.rst diff --git a/Documentation/admin-guide/mm/damon/index.rst b/Documentation/admin-guide/mm/damon/index.rst index 8c5dde3a5754..61aff88347f3 100644 --- a/Documentation/admin-guide/mm/damon/index.rst +++ b/Documentation/admin-guide/mm/damon/index.rst @@ -13,3 +13,4 @@ optimize those. start usage + reclaim diff --git a/Documentation/admin-guide/mm/damon/reclaim.rst b/Documentation/admin-guide/mm/damon/reclaim.rst new file mode 100644 index 000000000000..fb9def3a7355 --- /dev/null +++ b/Documentation/admin-guide/mm/damon/reclaim.rst @@ -0,0 +1,235 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================= +DAMON-based Reclamation +======================= + +DAMON-based Reclamation (DAMON_RECLAIM) is a static kernel module that aimed to +be used for proactive and lightweight reclamation under light memory pressure. +It doesn't aim to replace the LRU-list based page_granularity reclamation, but +to be selectively used for different level of memory pressure and requirements. + +Where Proactive Reclamation is Required? +======================================== + +On general memory over-committed systems, proactively reclaiming cold pages +helps saving memory and reducing latency spikes that incurred by the direct +reclaim of the process or CPU consumption of kswapd, while incurring only +minimal performance degradation [1]_ [2]_ . + +Free Pages Reporting [3]_ based memory over-commit virtualization systems are +good example of the cases. In such systems, the guest VMs reports their free +memory to host, and the host reallocates the reported memory to other guests. +As a result, the memory of the systems are fully utilized. However, the +guests could be not so memory-frugal, mainly because some kernel subsystems and +user-space applications are designed to use as much memory as available. Then, +guests could report only small amount of memory as free to host, results in +memory utilization drop of the systems. Running the proactive reclamation in +guests could mitigate this problem. + +How It Works? +============= + +DAMON_RECLAIM finds memory regions that didn't accessed for specific time +duration and page out. To avoid it consuming too much CPU for the paging out +operation, a speed limit can be configured. Under the speed limit, it pages +out memory regions that didn't accessed longer time first. System +administrators can also configure under what situation this scheme should +automatically activated and deactivated with three memory pressure watermarks. + +Interface: Module Parameters +============================ + +To use this feature, you should first ensure your system is running on a kernel +that is built with ``CONFIG_DAMON_RECLAIM=y``. + +To let sysadmins enable or disable it and tune for the given system, +DAMON_RECLAIM utilizes module parameters. That is, you can put +``damon_reclaim.=`` on the kernel boot command line or write +proper values to ``/sys/modules/damon_reclaim/parameters/`` files. + +Note that the parameter values except ``enabled`` are applied only when +DAMON_RECLAIM starts. Therefore, if you want to apply new parameter values in +runtime and DAMON_RECLAIM is already enabled, you should disable and re-enable +it via ``enabled`` parameter file. Writing of the new values to proper +parameter values should be done before the re-enablement. + +Below are the description of each parameter. + +enabled +------- + +Enable or disable DAMON_RECLAIM. + +You can enable DAMON_RCLAIM by setting the value of this parameter as ``Y``. +Setting it as ``N`` disables DAMON_RECLAIM. Note that DAMON_RECLAIM could do +no real monitoring and reclamation due to the watermarks-based activation +condition. Refer to below descriptions for the watermarks parameter for this. + +min_age +------- + +Time threshold for cold memory regions identification in microseconds. + +If a memory region is not accessed for this or longer time, DAMON_RECLAIM +identifies the region as cold, and reclaims it. + +120 seconds by default. + +quota_ms +-------- + +Limit of time for the reclamation in milliseconds. + +DAMON_RECLAIM tries to use only up to this time within a time window +(quota_reset_interval_ms) for trying reclamation of cold pages. This can be +used for limiting CPU consumption of DAMON_RECLAIM. If the value is zero, the +limit is disabled. + +10 ms by default. + +quota_sz +-------- + +Limit of size of memory for the reclamation in bytes. + +DAMON_RECLAIM charges amount of memory which it tried to reclaim within a time +window (quota_reset_interval_ms) and makes no more than this limit is tried. +This can be used for limiting consumption of CPU and IO. If this value is +zero, the limit is disabled. + +128 MiB by default. + +quota_reset_interval_ms +----------------------- + +The time/size quota charge reset interval in milliseconds. + +The charget reset interval for the quota of time (quota_ms) and size +(quota_sz). That is, DAMON_RECLAIM does not try reclamation for more than +quota_ms milliseconds or quota_sz bytes within quota_reset_interval_ms +milliseconds. + +1 second by default. + +wmarks_interval +--------------- + +Minimal time to wait before checking the watermarks, when DAMON_RECLAIM is +enabled but inactive due to its watermarks rule. + +wmarks_high +----------- + +Free memory rate (per thousand) for the high watermark. + +If free memory of the system in bytes per thousand bytes is higher than this, +DAMON_RECLAIM becomes inactive, so it does nothing but only periodically checks +the watermarks. + +wmarks_mid +---------- + +Free memory rate (per thousand) for the middle watermark. + +If free memory of the system in bytes per thousand bytes is between this and +the low watermark, DAMON_RECLAIM becomes active, so starts the monitoring and +the reclaiming. + +wmarks_low +---------- + +Free memory rate (per thousand) for the low watermark. + +If free memory of the system in bytes per thousand bytes is lower than this, +DAMON_RECLAIM becomes inactive, so it does nothing but periodically checks the +watermarks. In the case, the system falls back to the LRU-list based page +granularity reclamation logic. + +sample_interval +--------------- + +Sampling interval for the monitoring in microseconds. + +The sampling interval of DAMON for the cold memory monitoring. Please refer to +the DAMON documentation (:doc:`usage`) for more detail. + +aggr_interval +------------- + +Aggregation interval for the monitoring in microseconds. + +The aggregation interval of DAMON for the cold memory monitoring. Please +refer to the DAMON documentation (:doc:`usage`) for more detail. + +min_nr_regions +-------------- + +Minimum number of monitoring regions. + +The minimal number of monitoring regions of DAMON for the cold memory +monitoring. This can be used to set lower-bound of the monitoring quality. +But, setting this too high could result in increased monitoring overhead. +Please refer to the DAMON documentation (:doc:`usage`) for more detail. + +max_nr_regions +-------------- + +Maximum number of monitoring regions. + +The maximum number of monitoring regions of DAMON for the cold memory +monitoring. This can be used to set upper-bound of the monitoring overhead. +However, setting this too low could result in bad monitoring quality. Please +refer to the DAMON documentation (:doc:`usage`) for more detail. + +monitor_region_start +-------------------- + +Start of target memory region in physical address. + +The start physical address of memory region that DAMON_RECLAIM will do work +against. That is, DAMON_RECLAIM will find cold memory regions in this region +and reclaims. By default, biggest System RAM is used as the region. + +monitor_region_end +------------------ + +End of target memory region in physical address. + +The end physical address of memory region that DAMON_RECLAIM will do work +against. That is, DAMON_RECLAIM will find cold memory regions in this region +and reclaims. By default, biggest System RAM is used as the region. + +kdamond_pid +----------- + +PID of the DAMON thread. + +If DAMON_RECLAIM is enabled, this becomes the PID of the worker thread. Else, +-1. + +Example +======= + +Below runtime example commands make DAMON_RECLAIM to find memory regions that +not accessed for 30 seconds or more and pages out. The reclamation is limited +to be done only up to 1 GiB per second to avoid DAMON_RECLAIM consuming too +much CPU time for the paging out operation. It also asks DAMON_RECLAIM to do +nothing if the system's free memory rate is more than 50%, but start the real +works if it becomes lower than 40%. If DAMON_RECLAIM doesn't make progress and +therefore the free memory rate becomes lower than 20%, it asks DAMON_RECLAIM to +do nothing again, so that we can fall back to the LRU-list based page +granularity reclamation. :: + + # cd /sys/modules/damon_reclaim/parameters + # echo 30000000 > min_age + # echo $((1 * 1024 * 1024 * 1024)) > quota_sz + # echo 1000 > quota_reset_interval_ms + # echo 500 > wmarks_high + # echo 400 > wmarks_mid + # echo 200 > wmarks_low + # echo Y > enabled + +.. [1] https://research.google/pubs/pub48551/ +.. [2] https://lwn.net/Articles/787611/ +.. [3] https://www.kernel.org/doc/html/latest/vm/free_page_reporting.html -- 2.11.0