From c0a87c22d3f098517473c60c709478db80fcc544 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Mon, 30 Jun 2014 18:38:28 +0200 Subject: [PATCH] tlan: Enable link monitoring Enable old link monitoring code and modify it: - control LINK LED - use separate timer so it does not interfere with ACT LED Tested with Olicom OC-2326. Signed-off-by: Ondrej Zary Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/tlan.c | 115 +++++++++++++++++------------------------ drivers/net/ethernet/ti/tlan.h | 3 +- 2 files changed, 49 insertions(+), 69 deletions(-) diff --git a/drivers/net/ethernet/ti/tlan.c b/drivers/net/ethernet/ti/tlan.c index 2199fc8e5003..ccde7482d404 100644 --- a/drivers/net/ethernet/ti/tlan.c +++ b/drivers/net/ethernet/ti/tlan.c @@ -69,10 +69,6 @@ MODULE_AUTHOR("Maintainer: Samuel Chessman "); MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters"); MODULE_LICENSE("GPL"); - -/* Define this to enable Link beat monitoring */ -#undef MONITOR - /* Turn on debugging. See Documentation/networking/tlan.txt for details */ static int debug; module_param(debug, int, 0); @@ -194,9 +190,7 @@ static void tlan_phy_power_up(struct net_device *); static void tlan_phy_reset(struct net_device *); static void tlan_phy_start_link(struct net_device *); static void tlan_phy_finish_auto_neg(struct net_device *); -#ifdef MONITOR -static void tlan_phy_monitor(struct net_device *); -#endif +static void tlan_phy_monitor(unsigned long); /* static int tlan_phy_nop(struct net_device *); @@ -339,6 +333,7 @@ static void tlan_stop(struct net_device *dev) { struct tlan_priv *priv = netdev_priv(dev); + del_timer_sync(&priv->media_timer); tlan_read_and_clear_stats(dev, TLAN_RECORD); outl(TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD); /* Reset and power down phy */ @@ -888,6 +883,7 @@ static int tlan_open(struct net_device *dev) } init_timer(&priv->timer); + init_timer(&priv->media_timer); tlan_start(dev); @@ -1810,11 +1806,6 @@ static void tlan_timer(unsigned long data) priv->timer.function = NULL; switch (priv->timer_type) { -#ifdef MONITOR - case TLAN_TIMER_LINK_BEAT: - tlan_phy_monitor(dev); - break; -#endif case TLAN_TIMER_PHY_PDOWN: tlan_phy_power_down(dev); break; @@ -1858,8 +1849,6 @@ static void tlan_timer(unsigned long data) } - - /***************************************************************************** ****************************************************************************** @@ -2257,42 +2246,39 @@ tlan_finish_reset(struct net_device *dev) tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status); udelay(1000); tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status); - if ((status & MII_GS_LINK) && - /* We only support link info on Nat.Sem. PHY's */ - (tlphy_id1 == NAT_SEM_ID1) && - (tlphy_id2 == NAT_SEM_ID2)) { - tlan_mii_read_reg(dev, phy, MII_AN_LPA, &partner); - tlan_mii_read_reg(dev, phy, TLAN_TLPHY_PAR, &tlphy_par); - - netdev_info(dev, - "Link active with %s %uMbps %s-Duplex\n", - !(tlphy_par & TLAN_PHY_AN_EN_STAT) - ? "forced" : "Autonegotiation enabled,", - tlphy_par & TLAN_PHY_SPEED_100 - ? 100 : 10, - tlphy_par & TLAN_PHY_DUPLEX_FULL - ? "Full" : "Half"); - - if (tlphy_par & TLAN_PHY_AN_EN_STAT) { - netdev_info(dev, "Partner capability:"); - for (i = 5; i < 10; i++) - if (partner & (1 << i)) - pr_cont(" %s", media[i-5]); - pr_cont("\n"); - } - - tlan_dio_write8(dev->base_addr, TLAN_LED_REG, - TLAN_LED_LINK); -#ifdef MONITOR - /* We have link beat..for now anyway */ - priv->link = 1; - /*Enabling link beat monitoring */ - tlan_set_timer(dev, (10*HZ), TLAN_TIMER_LINK_BEAT); -#endif - } else if (status & MII_GS_LINK) { - netdev_info(dev, "Link active\n"); - tlan_dio_write8(dev->base_addr, TLAN_LED_REG, - TLAN_LED_LINK); + if (status & MII_GS_LINK) { + /* We only support link info on Nat.Sem. PHY's */ + if ((tlphy_id1 == NAT_SEM_ID1) && + (tlphy_id2 == NAT_SEM_ID2)) { + tlan_mii_read_reg(dev, phy, MII_AN_LPA, + &partner); + tlan_mii_read_reg(dev, phy, TLAN_TLPHY_PAR, + &tlphy_par); + + netdev_info(dev, + "Link active, %s %uMbps %s-Duplex\n", + !(tlphy_par & TLAN_PHY_AN_EN_STAT) + ? "forced" : "Autonegotiation enabled,", + tlphy_par & TLAN_PHY_SPEED_100 + ? 100 : 10, + tlphy_par & TLAN_PHY_DUPLEX_FULL + ? "Full" : "Half"); + + if (tlphy_par & TLAN_PHY_AN_EN_STAT) { + netdev_info(dev, "Partner capability:"); + for (i = 5; i < 10; i++) + if (partner & (1 << i)) + pr_cont(" %s", + media[i-5]); + pr_cont("\n"); + } + } else + netdev_info(dev, "Link active\n"); + /* Enabling link beat monitoring */ + priv->media_timer.function = tlan_phy_monitor; + priv->media_timer.data = (unsigned long) dev; + priv->media_timer.expires = jiffies + HZ; + add_timer(&priv->media_timer); } } @@ -2314,6 +2300,7 @@ tlan_finish_reset(struct net_device *dev) dev->base_addr + TLAN_HOST_CMD + 1); outl(priv->rx_list_dma, dev->base_addr + TLAN_CH_PARM); outl(TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD); + tlan_dio_write8(dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK); netif_carrier_on(dev); } else { netdev_info(dev, "Link inactive, will retry in 10 secs...\n"); @@ -2719,7 +2706,6 @@ static void tlan_phy_finish_auto_neg(struct net_device *dev) } -#ifdef MONITOR /********************************************************************* * @@ -2729,18 +2715,18 @@ static void tlan_phy_finish_auto_neg(struct net_device *dev) * None * * Params: - * dev The device structure of this device. + * data The device structure of this device. * * * This function monitors PHY condition by reading the status - * register via the MII bus. This can be used to give info - * about link changes (up/down), and possible switch to alternate - * media. + * register via the MII bus, controls LINK LED and notifies the + * kernel about link state. * *******************************************************************/ -void tlan_phy_monitor(struct net_device *dev) +static void tlan_phy_monitor(unsigned long data) { + struct net_device *dev = (struct net_device *) data; struct tlan_priv *priv = netdev_priv(dev); u16 phy; u16 phy_status; @@ -2752,30 +2738,25 @@ void tlan_phy_monitor(struct net_device *dev) /* Check if link has been lost */ if (!(phy_status & MII_GS_LINK)) { - if (priv->link) { - priv->link = 0; + if (netif_carrier_ok(dev)) { printk(KERN_DEBUG "TLAN: %s has lost link\n", dev->name); + tlan_dio_write8(dev->base_addr, TLAN_LED_REG, 0); netif_carrier_off(dev); - tlan_set_timer(dev, (2*HZ), TLAN_TIMER_LINK_BEAT); - return; } } /* Link restablished? */ - if ((phy_status & MII_GS_LINK) && !priv->link) { - priv->link = 1; + if ((phy_status & MII_GS_LINK) && !netif_carrier_ok(dev)) { + tlan_dio_write8(dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK); printk(KERN_DEBUG "TLAN: %s has reestablished link\n", dev->name); netif_carrier_on(dev); } - - /* Setup a new monitor */ - tlan_set_timer(dev, (2*HZ), TLAN_TIMER_LINK_BEAT); + priv->media_timer.expires = jiffies + HZ; + add_timer(&priv->media_timer); } -#endif /* MONITOR */ - /***************************************************************************** ****************************************************************************** diff --git a/drivers/net/ethernet/ti/tlan.h b/drivers/net/ethernet/ti/tlan.h index 2eb33a250788..4ced9053d9f4 100644 --- a/drivers/net/ethernet/ti/tlan.h +++ b/drivers/net/ethernet/ti/tlan.h @@ -195,6 +195,7 @@ struct tlan_priv { u32 timer_set_at; u32 timer_type; struct timer_list timer; + struct timer_list media_timer; struct board *adapter; u32 adapter_rev; u32 aui; @@ -206,7 +207,6 @@ struct tlan_priv { u8 tlan_rev; u8 tlan_full_duplex; spinlock_t lock; - u8 link; struct work_struct tlan_tqueue; u8 neg_be_verbose; }; @@ -219,7 +219,6 @@ struct tlan_priv { * ****************************************************************/ -#define TLAN_TIMER_LINK_BEAT 1 #define TLAN_TIMER_ACTIVITY 2 #define TLAN_TIMER_PHY_PDOWN 3 #define TLAN_TIMER_PHY_PUP 4 -- 2.11.0