From c1fcc4c9bd50d2d29bfaeb888af7de246343235d Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Tue, 29 Nov 2011 13:28:05 +0000 Subject: [PATCH] Staging: VME: PIO2: Correct irq reset The loop used to reset the interrupt masks has faulty logic. There are 4 banks of 8 I/O, however each mask is comprised of 2 bits and thus there are 8 sets of registers to clear. Driver was wrongly equating this with 8 banks leading to a us writing past the end of the "bank" array (used to store mask configuration as these registers are write only) and thus causing memory corruption. Clear both registers of masks for each bank and half iterations. Reported-by: Dan Carpenter Signed-off-by: Martyn Welch Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vme/devices/vme_pio2_gpio.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/staging/vme/devices/vme_pio2_gpio.c b/drivers/staging/vme/devices/vme_pio2_gpio.c index 2ac88ad17042..dc837deb99dd 100644 --- a/drivers/staging/vme/devices/vme_pio2_gpio.c +++ b/drivers/staging/vme/devices/vme_pio2_gpio.c @@ -159,9 +159,14 @@ int pio2_gpio_reset(struct pio2_card *card) } /* Set input interrupt masks */ - for (i = 0; i < 8; i++) { + for (i = 0; i < 4; i++) { + retval = vme_master_write(card->window, &data, 1, + PIO2_REGS_INT_MASK[i * 2]); + if (retval < 0) + return retval; + retval = vme_master_write(card->window, &data, 1, - PIO2_REGS_INT_MASK[i]); + PIO2_REGS_INT_MASK[(i * 2) + 1]); if (retval < 0) return retval; -- 2.11.0