From c92e87276c83eae1c92c6edaec0a6f3bf9b8f795 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Wed, 13 Jan 2016 18:41:34 +0200 Subject: [PATCH] drm/omap: HDMI: Fix HSW value On OMAP4 and OMAP5 ES1.0 the HDMI_WP_VIDEO_TIMING_H:HSW field is set directly to the HSW value. On later SoCs the field needs to be programmed with the value of HSW-1. Currently the driver always programs the field with the HSW value. Most videomodes seem to work fine with that, but at least low resolution interlaced modes don't work at all. This patch fixes the HSW for OMAP5 ES2.0+ SoCs. Signed-off-by: Tomi Valkeinen --- drivers/gpu/drm/omapdrm/dss/hdmi_wp.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi_wp.c b/drivers/gpu/drm/omapdrm/dss/hdmi_wp.c index 7c544bc56fb5..1b76cdd781ad 100644 --- a/drivers/gpu/drm/omapdrm/dss/hdmi_wp.c +++ b/drivers/gpu/drm/omapdrm/dss/hdmi_wp.c @@ -165,12 +165,24 @@ void hdmi_wp_video_config_timing(struct hdmi_wp_data *wp, { u32 timing_h = 0; u32 timing_v = 0; + unsigned hsw_offset = 1; DSSDBG("Enter hdmi_wp_video_config_timing\n"); + /* + * On OMAP4 and OMAP5 ES1 the HSW field is programmed as is. On OMAP5 + * ES2+ (including DRA7/AM5 SoCs) HSW field is programmed to hsw-1. + * However, we don't support OMAP5 ES1 at all, so we can just check for + * OMAP4 here. + */ + if (omapdss_get_version() == OMAPDSS_VER_OMAP4430_ES1 || + omapdss_get_version() == OMAPDSS_VER_OMAP4430_ES2 || + omapdss_get_version() == OMAPDSS_VER_OMAP4) + hsw_offset = 0; + timing_h |= FLD_VAL(timings->hbp, 31, 20); timing_h |= FLD_VAL(timings->hfp, 19, 8); - timing_h |= FLD_VAL(timings->hsw, 7, 0); + timing_h |= FLD_VAL(timings->hsw - hsw_offset, 7, 0); hdmi_write_reg(wp->base, HDMI_WP_VIDEO_TIMING_H, timing_h); timing_v |= FLD_VAL(timings->vbp, 31, 20); -- 2.11.0