From ca342386a9b3a47b3ed30c9a89e74c9ca6152cc6 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 28 May 2019 11:27:29 +0300 Subject: [PATCH] drm/bridge: tc358767: cleanup aux_link_setup The driver sets up AUX link at probe time, but, for some reason, also sets the main link's number of lanes using tc->link.base.num_lanes. This is not needed nor correct, as the number of lanes has not been decided yet. The number of lanes will be set later during main link setup. Modify aux_link_setup so that it does not use tc->link, and thus makes aux setup independent of the link probing. Signed-off-by: Tomi Valkeinen Reviewed-by: Andrzej Hajda Reviewed-by: Laurent Pinchart Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190528082747.3631-7-tomi.valkeinen@ti.com --- drivers/gpu/drm/bridge/tc358767.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c index 119cd8d14d4b..39a9de880e5a 100644 --- a/drivers/gpu/drm/bridge/tc358767.c +++ b/drivers/gpu/drm/bridge/tc358767.c @@ -542,7 +542,6 @@ static int tc_aux_link_setup(struct tc_data *tc) unsigned long rate; u32 value; int ret; - u32 dp_phy_ctrl; rate = clk_get_rate(tc->refclk); switch (rate) { @@ -567,10 +566,7 @@ static int tc_aux_link_setup(struct tc_data *tc) value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2; tc_write(SYS_PLLPARAM, value); - dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN; - if (tc->link.base.num_lanes == 2) - dp_phy_ctrl |= PHY_2LANE; - tc_write(DP_PHY_CTRL, dp_phy_ctrl); + tc_write(DP_PHY_CTRL, BGREN | PWR_SW_EN | PHY_A0_EN); /* * Initially PLLs are in bypass. Force PLL parameter update, @@ -587,8 +583,9 @@ static int tc_aux_link_setup(struct tc_data *tc) if (ret == -ETIMEDOUT) { dev_err(tc->dev, "Timeout waiting for PHY to become ready"); return ret; - } else if (ret) + } else if (ret) { goto err; + } /* Setup AUX link */ tc_write(DP0_AUXCFG1, AUX_RX_FILTER_EN | -- 2.11.0