From ce5ca149a6dcccee6060e08a162e837f5ebaaaa8 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 27 Feb 2020 16:28:35 -0600 Subject: [PATCH] ARM: dts: AM33xx-l4: Update PRUSS interconnect target-module node The PRU-ICSS present on some AM33xx SoCs has a very unique SYSC register. The IP also uses a hard-reset line, and requires this PRCM reset to be deasserted to be able to access any registers. Update the existing PRUSS interconnect target-module with all the required properties. The PRUSS device itself shall be added as a child node to this interconnect node in the future. PRU-ICSS is not supported on AM3351/AM3352/AM3354 SoCs though in the AM33xx family, so the target module node should be disabled in derivative board files that use any of these SoCs. Signed-off-by: Suman Anna Reviewed-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx-l4.dtsi | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 4e2986f0c604..5ed7f3c58c0f 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -759,12 +759,27 @@ ranges = <0x0 0x200000 0x80000>; }; - target-module@300000 { /* 0x4a300000, ap 9 04.0 */ - compatible = "ti,sysc"; - status = "disabled"; + pruss_tm: target-module@300000 { /* 0x4a300000, ap 9 04.0 */ + compatible = "ti,sysc-pruss", "ti,sysc"; + reg = <0x326000 0x4>, + <0x326004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT | + SYSC_PRUSS_SUB_MWAIT)>; + ti,sysc-midle = , + , + ; + ti,sysc-sidle = , + , + ; + clocks = <&pruss_ocp_clkctrl AM3_PRUSS_OCP_PRUSS_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_per 1>; + reset-names = "rstctrl"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x300000 0x80000>; + status = "disabled"; }; }; }; -- 2.11.0