From cf0fd1086cbb55fb5c0ecbd652fec34335fb7657 Mon Sep 17 00:00:00 2001 From: Bill Pemberton Date: Fri, 27 Mar 2009 11:29:29 -0400 Subject: [PATCH] Staging: comedi: remove C99 comments in APCI1710_82x54.c Signed-off-by: Bill Pemberton Signed-off-by: Greg Kroah-Hartman --- .../comedi/drivers/addi-data/APCI1710_82x54.c | 70 +++++++++++----------- 1 file changed, 35 insertions(+), 35 deletions(-) diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c index 3f8ffa2c3e87..b3ee729c50ca 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c @@ -233,9 +233,9 @@ int i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub unsigned char b_OutputLevel; unsigned char b_HardwareGateLevel; - //BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz + /* BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz */ unsigned int dw_Test = 0; - //END JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz + /* END JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz */ i_ReturnValue = insn->n; b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec); @@ -256,7 +256,7 @@ int i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub if (b_TimerNbr <= 2) { /* Test the timer mode */ if (b_TimerMode <= 5) { - //BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz + /* BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz */ /* Test te imput clock selection */ /* if (((b_TimerNbr == 0) && (b_InputClockSelection == 0)) || @@ -271,11 +271,11 @@ int i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub ((b_InputClockSelection == APCI1710_PCI_BUS_CLOCK) || (b_InputClockSelection == APCI1710_FRONT_CONNECTOR_INPUT) || (b_InputClockSelection == APCI1710_10MHZ)))) { - //BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz + /* BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz */ if (((b_InputClockSelection == APCI1710_10MHZ) && ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0x0000FFFFUL) >= 0x3131)) || (b_InputClockSelection != APCI1710_10MHZ)) { - //END JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz + /* END JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz */ /* Test the input clock level selection */ if ((b_InputClockLevel == 0) || @@ -284,7 +284,7 @@ int i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub if ((b_OutputLevel == 0) || (b_OutputLevel == 1)) { /* Test the hardware gate level selection */ if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1)) { - //BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz + /* BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */ /* Test if version > 1.1 and clock selection = 10MHz */ if ((b_InputClockSelection == APCI1710_10MHZ) && ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0x0000FFFFUL) > 0x3131)) { /* Test if 40MHz quartz on board */ @@ -297,7 +297,7 @@ int i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub /* Test if detection OK */ if (dw_Test == 1) { - //END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz + /* END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */ /* Initialisation OK */ devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].b_82X54Init = 1; @@ -314,7 +314,7 @@ int i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].b_HardwareGateLevel = b_HardwareGateLevel; /* Set the configuration word and disable the timer */ - //BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz + /* BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */ /* devpriv->s_ModuleInfo [b_ModulNbr]. s_82X54ModuleInfo. @@ -330,7 +330,7 @@ int i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub } devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord = (unsigned int)(((b_HardwareGateLevel << 0) & 0x1) | ((b_InputClockLevel << 1) & 0x2) | (((~b_OutputLevel & 1) << 2) & 0x4) | ((b_InputClockSelection << 4) & 0x30)); - //END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz + /* END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */ outl(devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord, devpriv->s_BoardInfos.ui_Address + 32 + (b_TimerNbr * 4) + (64 * b_ModulNbr)); /* Initialise the 82X54 Timer */ @@ -338,31 +338,31 @@ int i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub /* Write the reload value */ outl(ul_ReloadValue, devpriv->s_BoardInfos.ui_Address + 0 + (b_TimerNbr * 4) + (64 * b_ModulNbr)); - //BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz - } // if (dw_Test == 1) + /* BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */ + } /* if (dw_Test == 1) */ else { /* Input timer clock selection is wrong */ i_ReturnValue = -6; - } // if (dw_Test == 1) - //END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz - } // if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1)) + } /* if (dw_Test == 1) */ + /* END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */ + } /* if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1)) */ else { /* Selection from hardware gate level is wrong */ DPRINTK("Selection from hardware gate level is wrong\n"); i_ReturnValue = -9; - } // if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1)) - } // if ((b_OutputLevel == 0) || (b_OutputLevel == 1)) + } /* if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1)) */ + } /* if ((b_OutputLevel == 0) || (b_OutputLevel == 1)) */ else { /* Selection from output clock level is wrong */ DPRINTK("Selection from output clock level is wrong\n"); i_ReturnValue = -8; - } // if ((b_OutputLevel == 0) || (b_OutputLevel == 1)) - } // if ((b_InputClockLevel == 0) || (b_InputClockLevel == 1)) + } /* if ((b_OutputLevel == 0) || (b_OutputLevel == 1)) */ + } /* if ((b_InputClockLevel == 0) || (b_InputClockLevel == 1)) */ else { /* Selection from input clock level is wrong */ DPRINTK("Selection from input clock level is wrong\n"); i_ReturnValue = -7; - } // if ((b_InputClockLevel == 0) || (b_InputClockLevel == 1)) + } /* if ((b_InputClockLevel == 0) || (b_InputClockLevel == 1)) */ } else { /* Input timer clock selection is wrong */ DPRINTK("Input timer clock selection is wrong\n"); @@ -373,18 +373,18 @@ int i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub DPRINTK("Input timer clock selection is wrong\n"); i_ReturnValue = -6; } - } // if ((b_TimerMode >= 0) && (b_TimerMode <= 5)) + } /* if ((b_TimerMode >= 0) && (b_TimerMode <= 5)) */ else { /* Timer mode selection is wrong */ DPRINTK("Timer mode selection is wrong\n"); i_ReturnValue = -5; - } // if ((b_TimerMode >= 0) && (b_TimerMode <= 5)) - } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) + } /* if ((b_TimerMode >= 0) && (b_TimerMode <= 5)) */ + } /* if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */ else { /* Timer selection wrong */ DPRINTK("Timer selection wrong\n"); i_ReturnValue = -3; - } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) + } /* if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */ } else { /* The module is not a TIMER module */ DPRINTK("The module is not a TIMER module\n"); @@ -431,7 +431,7 @@ int i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device *dev,struct come i_ReturnValue=insn->n; b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec); b_TimerNbr = (unsigned char) CR_CHAN(insn->chanspec); - b_ActionType = (unsigned char) data[0]; // enable disable + b_ActionType = (unsigned char) data[0]; /* enable disable */ +----------------------------------------------------------------------------+ | Output Parameters : - | +----------------------------------------------------------------------------+ @@ -462,7 +462,7 @@ int i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device * dev, i_ReturnValue = insn->n; b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec); b_TimerNbr = (unsigned char) CR_CHAN(insn->chanspec); - b_ActionType = (unsigned char) data[0]; // enable disable + b_ActionType = (unsigned char) data[0]; /* enable disable */ /* Test the module number */ if (b_ModulNbr < 4) { @@ -487,9 +487,9 @@ int i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device * dev, devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord = devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord | 0x8; outl(devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord, devpriv->s_BoardInfos.ui_Address + 32 + (b_TimerNbr * 4) + (64 * b_ModulNbr)); - devpriv->tsk_Current = current; // Save the current process task structure + devpriv->tsk_Current = current; /* Save the current process task structure */ - } // if (b_InterruptEnable == APCI1710_ENABLE) + } /* if (b_InterruptEnable == APCI1710_ENABLE) */ else { /* Disable the interrupt */ devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord = devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord & 0xF7; @@ -498,7 +498,7 @@ int i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device * dev, /* Save the interrupt flag */ devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.b_InterruptMask = devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.b_InterruptMask & (0xFF - (1 << b_TimerNbr)); - } // if (b_InterruptEnable == APCI1710_ENABLE) + } /* if (b_InterruptEnable == APCI1710_ENABLE) */ /* Test if error occur */ if (i_ReturnValue >= 0) { @@ -530,7 +530,7 @@ int i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device * dev, /* Disable the timer */ outl(0, devpriv->s_BoardInfos.ui_Address + 44 + (b_TimerNbr * 4) + (64 * b_ModulNbr)); break; - } // Switch end + } /* Switch end */ } else { /* Timer not initialised see function */ DPRINTK ("Timer not initialised see function\n"); @@ -540,7 +540,7 @@ int i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device * dev, /* Timer selection wrong */ DPRINTK("Timer selection wrong\n"); i_ReturnValue = -3; - } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) + } /* if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */ } else { /* The module is not a TIMER module */ DPRINTK("The module is not a TIMER module\n"); @@ -662,7 +662,7 @@ int i_APCI1710_InsnReadAllTimerValue(struct comedi_device *dev, struct comedi_su i_ReturnValue = -2; } - } // End of Switch + } /* End of Switch */ return (i_ReturnValue); } @@ -800,7 +800,7 @@ int i_APCI1710_ReadTimerValue(struct comedi_device * dev, /* Timer selection wrong */ DPRINTK("Timer selection wrong\n"); i_ReturnValue = -3; - } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) + } /* if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */ } else { /* The module is not a TIMER module */ DPRINTK("The module is not a TIMER module\n"); @@ -879,7 +879,7 @@ int i_APCI1710_GetTimerOutputLevel(struct comedi_device * dev, /* Timer selection wrong */ DPRINTK("Timer selection wrong\n"); i_ReturnValue = -3; - } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) + } /* if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */ } else { /* The module is not a TIMER module */ DPRINTK("The module is not a TIMER module\n"); @@ -958,7 +958,7 @@ int i_APCI1710_GetTimerProgressStatus(struct comedi_device *dev, } else { /* Timer selection wrong */ i_ReturnValue = -3; - } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) + } /* if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */ } else { /* The module is not a TIMER module */ @@ -1031,7 +1031,7 @@ int i_APCI1710_WriteTimerValue(struct comedi_device * dev, /* Timer selection wrong */ DPRINTK("Timer selection wrong\n"); i_ReturnValue = -3; - } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) + } /* if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */ } else { /* The module is not a TIMER module */ DPRINTK("The module is not a TIMER module\n"); -- 2.11.0