From d1aeb5f399d98443fd1f4b26480519379cb9cec8 Mon Sep 17 00:00:00 2001 From: Madhav Chauhan Date: Mon, 15 Oct 2018 17:28:03 +0300 Subject: [PATCH] drm/i915/icl: Configure DSI transcoder timings As part of DSI enable sequence, transcoder timings (horizontal & vertical) need to be set so that transcoder will generate the stream output as per those timings. This patch set required transcoder timings as per BSPEC. v2: Remove TRANS_TIMING_SHIFT usage v3 by Jani: - Rebase - Reduce temp variable use - Checkpatch fix Signed-off-by: Madhav Chauhan Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/525949ae4e919a4f2b807d606234322534656048.1539613303.git.jani.nikula@intel.com --- drivers/gpu/drm/i915/icl_dsi.c | 118 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 118 insertions(+) diff --git a/drivers/gpu/drm/i915/icl_dsi.c b/drivers/gpu/drm/i915/icl_dsi.c index 87d5e6435791..f6ed57b28676 100644 --- a/drivers/gpu/drm/i915/icl_dsi.c +++ b/drivers/gpu/drm/i915/icl_dsi.c @@ -477,6 +477,121 @@ gen11_dsi_configure_transcoder(struct intel_encoder *encoder, } static void +gen11_dsi_set_transcoder_timings(struct intel_encoder *encoder, + const struct intel_crtc_state *pipe_config) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + const struct drm_display_mode *adjusted_mode = + &pipe_config->base.adjusted_mode; + enum port port; + enum transcoder dsi_trans; + /* horizontal timings */ + u16 htotal, hactive, hsync_start, hsync_end, hsync_size; + u16 hfront_porch, hback_porch; + /* vertical timings */ + u16 vtotal, vactive, vsync_start, vsync_end, vsync_shift; + + hactive = adjusted_mode->crtc_hdisplay; + htotal = adjusted_mode->crtc_htotal; + hsync_start = adjusted_mode->crtc_hsync_start; + hsync_end = adjusted_mode->crtc_hsync_end; + hsync_size = hsync_end - hsync_start; + hfront_porch = (adjusted_mode->crtc_hsync_start - + adjusted_mode->crtc_hdisplay); + hback_porch = (adjusted_mode->crtc_htotal - + adjusted_mode->crtc_hsync_end); + vactive = adjusted_mode->crtc_vdisplay; + vtotal = adjusted_mode->crtc_vtotal; + vsync_start = adjusted_mode->crtc_vsync_start; + vsync_end = adjusted_mode->crtc_vsync_end; + vsync_shift = hsync_start - htotal / 2; + + if (intel_dsi->dual_link) { + hactive /= 2; + if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) + hactive += intel_dsi->pixel_overlap; + htotal /= 2; + } + + /* minimum hactive as per bspec: 256 pixels */ + if (adjusted_mode->crtc_hdisplay < 256) + DRM_ERROR("hactive is less then 256 pixels\n"); + + /* if RGB666 format, then hactive must be multiple of 4 pixels */ + if (intel_dsi->pixel_format == MIPI_DSI_FMT_RGB666 && hactive % 4 != 0) + DRM_ERROR("hactive pixels are not multiple of 4\n"); + + /* program TRANS_HTOTAL register */ + for_each_dsi_port(port, intel_dsi->ports) { + dsi_trans = dsi_port_to_transcoder(port); + I915_WRITE(HTOTAL(dsi_trans), + (hactive - 1) | ((htotal - 1) << 16)); + } + + /* TRANS_HSYNC register to be programmed only for video mode */ + if (intel_dsi->operation_mode == INTEL_DSI_VIDEO_MODE) { + if (intel_dsi->video_mode_format == + VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE) { + /* BSPEC: hsync size should be atleast 16 pixels */ + if (hsync_size < 16) + DRM_ERROR("hsync size < 16 pixels\n"); + } + + if (hback_porch < 16) + DRM_ERROR("hback porch < 16 pixels\n"); + + if (intel_dsi->dual_link) { + hsync_start /= 2; + hsync_end /= 2; + } + + for_each_dsi_port(port, intel_dsi->ports) { + dsi_trans = dsi_port_to_transcoder(port); + I915_WRITE(HSYNC(dsi_trans), + (hsync_start - 1) | ((hsync_end - 1) << 16)); + } + } + + /* program TRANS_VTOTAL register */ + for_each_dsi_port(port, intel_dsi->ports) { + dsi_trans = dsi_port_to_transcoder(port); + /* + * FIXME: Programing this by assuming progressive mode, since + * non-interlaced info from VBT is not saved inside + * struct drm_display_mode. + * For interlace mode: program required pixel minus 2 + */ + I915_WRITE(VTOTAL(dsi_trans), + (vactive - 1) | ((vtotal - 1) << 16)); + } + + if (vsync_end < vsync_start || vsync_end > vtotal) + DRM_ERROR("Invalid vsync_end value\n"); + + if (vsync_start < vactive) + DRM_ERROR("vsync_start less than vactive\n"); + + /* program TRANS_VSYNC register */ + for_each_dsi_port(port, intel_dsi->ports) { + dsi_trans = dsi_port_to_transcoder(port); + I915_WRITE(VSYNC(dsi_trans), + (vsync_start - 1) | ((vsync_end - 1) << 16)); + } + + /* + * FIXME: It has to be programmed only for interlaced + * modes. Put the check condition here once interlaced + * info available as described above. + * program TRANS_VSYNCSHIFT register + */ + for_each_dsi_port(port, intel_dsi->ports) { + dsi_trans = dsi_port_to_transcoder(port); + I915_WRITE(VSYNCSHIFT(dsi_trans), vsync_shift); + } +} + +static void gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder, const struct intel_crtc_state *pipe_config) { @@ -512,4 +627,7 @@ gen11_dsi_pre_enable(struct intel_encoder *encoder, /* step4: enable DSI port and DPHY */ gen11_dsi_enable_port_and_phy(encoder, pipe_config); + + /* step6c: configure transcoder timings */ + gen11_dsi_set_transcoder_timings(encoder, pipe_config); } -- 2.11.0