From d22418b09d894af6a1458911dd61e245b4d1d820 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 15 May 2012 11:28:43 -0700 Subject: [PATCH] staging: comedi: refactor unioxx5 driver to remove forward declarations Refactor of the unioxx5 comedi driver to remove all the forward declarations. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Cc: Mori Hess Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/unioxx5.c | 390 ++++++++++++++----------------- 1 file changed, 181 insertions(+), 209 deletions(-) diff --git a/drivers/staging/comedi/drivers/unioxx5.c b/drivers/staging/comedi/drivers/unioxx5.c index 0eaca68ce345..2d238ae7c936 100644 --- a/drivers/staging/comedi/drivers/unioxx5.c +++ b/drivers/staging/comedi/drivers/unioxx5.c @@ -83,26 +83,189 @@ struct unioxx5_subd_priv { unsigned char usp_prev_cn_val[3]; /* previous channel value */ }; -static int unioxx5_subdev_write(struct comedi_device *dev, - struct comedi_subdevice *subdev, - struct comedi_insn *insn, unsigned int *data); -static int unioxx5_subdev_read(struct comedi_device *dev, - struct comedi_subdevice *subdev, - struct comedi_insn *insn, unsigned int *data); -static int unioxx5_insn_config(struct comedi_device *dev, - struct comedi_subdevice *subdev, - struct comedi_insn *insn, unsigned int *data); -static int __unioxx5_digital_write(struct unioxx5_subd_priv *usp, - unsigned int *data, int channel, int minor); +static int __unioxx5_define_chan_offset(int chan_num) +{ + + if (chan_num < 0 || chan_num > 23) + return -1; + + return (chan_num >> 3) + 1; +} + +#if 0 /* not used? */ +static void __unioxx5_digital_config(struct unioxx5_subd_priv *usp, int mode) +{ + int i, mask; + + mask = (mode == ALL_2_OUTPUT) ? 0xFF : 0x00; + printk("COMEDI: mode = %d\n", mask); + + outb(1, usp->usp_iobase + 0); + + for (i = 0; i < 3; i++) + outb(mask, usp->usp_iobase + i); + + outb(0, usp->usp_iobase + 0); +} +#endif + +/* configure channels for analog i/o (even to output, odd to input) */ +static void __unioxx5_analog_config(struct unioxx5_subd_priv *usp, int channel) +{ + int chan_a, chan_b, conf, channel_offset; + + channel_offset = __unioxx5_define_chan_offset(channel); + conf = usp->usp_prev_cn_val[channel_offset - 1]; + chan_a = chan_b = 1; + + /* setting channel A and channel B mask */ + if (channel % 2 == 0) { + chan_a <<= channel & 0x07; + chan_b <<= (channel + 1) & 0x07; + } else { + chan_a <<= (channel - 1) & 0x07; + chan_b <<= channel & 0x07; + } + + conf |= chan_a; /* even channel ot output */ + conf &= ~chan_b; /* odd channel to input */ + + outb(1, usp->usp_iobase + 0); + outb(conf, usp->usp_iobase + channel_offset); + outb(0, usp->usp_iobase + 0); + + usp->usp_prev_cn_val[channel_offset - 1] = conf; +} + static int __unioxx5_digital_read(struct unioxx5_subd_priv *usp, - unsigned int *data, int channel, int minor); -/* static void __unioxx5_digital_config(struct unioxx5_subd_priv* usp, int mode); */ -static int __unioxx5_analog_write(struct unioxx5_subd_priv *usp, - unsigned int *data, int channel, int minor); + unsigned int *data, int channel, int minor) +{ + int channel_offset, mask = 1 << (channel & 0x07); + + channel_offset = __unioxx5_define_chan_offset(channel); + if (channel_offset < 0) { + printk(KERN_ERR + "comedi%d: undefined channel %d. channel range is 0 .. 23\n", + minor, channel); + return 0; + } + + *data = inb(usp->usp_iobase + channel_offset); + *data &= mask; + + /* correct the read value to 0 or 1 */ + if (channel_offset > 1) + channel -= 2 << channel_offset; + *data >>= channel; + return 1; +} + static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp, - unsigned int *data, int channel, int minor); -static int __unioxx5_define_chan_offset(int chan_num); -static void __unioxx5_analog_config(struct unioxx5_subd_priv *usp, int channel); + unsigned int *data, int channel, int minor) +{ + int module_no, read_ch; + char control; + + module_no = channel / 2; + read_ch = channel % 2; /* depend on type of channel (A or B) */ + + /* defining if given module can work on input */ + if (usp->usp_module_type[module_no] & MODULE_OUTPUT_MASK) { + printk(KERN_ERR + "comedi%d: module in position %d with id 0x%02x is for output only", + minor, module_no, usp->usp_module_type[module_no]); + return 0; + } + + __unioxx5_analog_config(usp, channel); + /* sends module number to card(1 .. 12) */ + outb(module_no + 1, usp->usp_iobase + 5); + outb('V', usp->usp_iobase + 6); /* sends to module (V)erify command */ + control = inb(usp->usp_iobase); /* get control register byte */ + + /* waits while reading four bytes will be allowed */ + while (!((control = inb(usp->usp_iobase + 0)) & Rx4CA)) + ; + + /* if four bytes readding error occurs - return 0(false) */ + if ((control & Rx4CA_ERR_MASK)) { + printk("COMEDI: 4 bytes error\n"); + return 0; + } + + if (read_ch) + *data = inw(usp->usp_iobase + 6); /* channel B */ + else + *data = inw(usp->usp_iobase + 4); /* channel A */ + + return 1; +} + +static int __unioxx5_digital_write(struct unioxx5_subd_priv *usp, + unsigned int *data, int channel, int minor) +{ + int channel_offset, val; + int mask = 1 << (channel & 0x07); + + channel_offset = __unioxx5_define_chan_offset(channel); + if (channel_offset < 0) { + printk(KERN_ERR + "comedi%d: undefined channel %d. channel range is 0 .. 23\n", + minor, channel); + return 0; + } + + /* getting previous written value */ + val = usp->usp_prev_wr_val[channel_offset - 1]; + + if (*data) + val |= mask; + else + val &= ~mask; + + outb(val, usp->usp_iobase + channel_offset); + /* saving new written value */ + usp->usp_prev_wr_val[channel_offset - 1] = val; + + return 1; +} + +static int __unioxx5_analog_write(struct unioxx5_subd_priv *usp, + unsigned int *data, int channel, int minor) +{ + int module, i; + + module = channel / 2; /* definig module number(0 .. 11) */ + i = (channel % 2) << 1; /* depends on type of channel (A or B) */ + + /* defining if given module can work on output */ + if (!(usp->usp_module_type[module] & MODULE_OUTPUT_MASK)) { + printk(KERN_ERR + "comedi%d: module in position %d with id 0x%0x is for input only!\n", + minor, module, usp->usp_module_type[module]); + return 0; + } + + __unioxx5_analog_config(usp, channel); + /* saving minor byte */ + usp->usp_extra_data[module][i++] = (unsigned char)(*data & 0x00FF); + /* saving major byte */ + usp->usp_extra_data[module][i] = (unsigned char)((*data & 0xFF00) >> 8); + + /* while(!((inb(usp->usp_iobase + 0)) & TxBE)); */ + /* sending module number to card(1 .. 12) */ + outb(module + 1, usp->usp_iobase + 5); + outb('W', usp->usp_iobase + 6); /* sends (W)rite command to module */ + + /* sending for bytes to module(one byte per cycle iteration) */ + for (i = 0; i < 4; i++) { + while (!((inb(usp->usp_iobase + 0)) & TxBE)) + ; /* waits while writting will be allowed */ + outb(usp->usp_extra_data[module][i], usp->usp_iobase + 6); + } + + return 1; +} static int unioxx5_subdev_read(struct comedi_device *dev, struct comedi_subdevice *subdev, @@ -275,197 +438,6 @@ static int __unioxx5_subdev_init(struct comedi_subdevice *subdev, return 0; } -static int __unioxx5_digital_write(struct unioxx5_subd_priv *usp, - unsigned int *data, int channel, int minor) -{ - int channel_offset, val; - int mask = 1 << (channel & 0x07); - - channel_offset = __unioxx5_define_chan_offset(channel); - if (channel_offset < 0) { - printk(KERN_ERR - "comedi%d: undefined channel %d. channel range is 0 .. 23\n", - minor, channel); - return 0; - } - - /* getting previous written value */ - val = usp->usp_prev_wr_val[channel_offset - 1]; - - if (*data) - val |= mask; - else - val &= ~mask; - - outb(val, usp->usp_iobase + channel_offset); - /* saving new written value */ - usp->usp_prev_wr_val[channel_offset - 1] = val; - - return 1; -} - -/* function for digital reading */ -static int __unioxx5_digital_read(struct unioxx5_subd_priv *usp, - unsigned int *data, int channel, int minor) -{ - int channel_offset, mask = 1 << (channel & 0x07); - - channel_offset = __unioxx5_define_chan_offset(channel); - if (channel_offset < 0) { - printk(KERN_ERR - "comedi%d: undefined channel %d. channel range is 0 .. 23\n", - minor, channel); - return 0; - } - - *data = inb(usp->usp_iobase + channel_offset); - *data &= mask; - - if (channel_offset > 1) - channel -= 2 << channel_offset; /* this operation is created for correct readed value to 0 or 1 */ - *data >>= channel; - return 1; -} - -#if 0 /* not used? */ -static void __unioxx5_digital_config(struct unioxx5_subd_priv *usp, int mode) -{ - int i, mask; - - mask = (mode == ALL_2_OUTPUT) ? 0xFF : 0x00; - printk("COMEDI: mode = %d\n", mask); - - outb(1, usp->usp_iobase + 0); - - for (i = 0; i < 3; i++) - outb(mask, usp->usp_iobase + i); - - outb(0, usp->usp_iobase + 0); -} -#endif - -static int __unioxx5_analog_write(struct unioxx5_subd_priv *usp, - unsigned int *data, int channel, int minor) -{ - int module, i; - - module = channel / 2; /* definig module number(0 .. 11) */ - i = (channel % 2) << 1; /* depends on type of channel (A or B) */ - - /* defining if given module can work on output */ - if (!(usp->usp_module_type[module] & MODULE_OUTPUT_MASK)) { - printk(KERN_ERR - "comedi%d: module in position %d with id 0x%0x is for input only!\n", - minor, module, usp->usp_module_type[module]); - return 0; - } - - __unioxx5_analog_config(usp, channel); - /* saving minor byte */ - usp->usp_extra_data[module][i++] = (unsigned char)(*data & 0x00FF); - /* saving major byte */ - usp->usp_extra_data[module][i] = (unsigned char)((*data & 0xFF00) >> 8); - - /* while(!((inb(usp->usp_iobase + 0)) & TxBE)); */ - /* sending module number to card(1 .. 12) */ - outb(module + 1, usp->usp_iobase + 5); - outb('W', usp->usp_iobase + 6); /* sends (W)rite command to module */ - - /* sending for bytes to module(one byte per cycle iteration) */ - for (i = 0; i < 4; i++) { - while (!((inb(usp->usp_iobase + 0)) & TxBE)) - ; /* waits while writting will be allowed */ - outb(usp->usp_extra_data[module][i], usp->usp_iobase + 6); - } - - return 1; -} - -static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp, - unsigned int *data, int channel, int minor) -{ - int module_no, read_ch; - char control; - - module_no = channel / 2; - read_ch = channel % 2; /* depend on type of channel (A or B) */ - - /* defining if given module can work on input */ - if (usp->usp_module_type[module_no] & MODULE_OUTPUT_MASK) { - printk(KERN_ERR - "comedi%d: module in position %d with id 0x%02x is for output only", - minor, module_no, usp->usp_module_type[module_no]); - return 0; - } - - __unioxx5_analog_config(usp, channel); - /* sends module number to card(1 .. 12) */ - outb(module_no + 1, usp->usp_iobase + 5); - outb('V', usp->usp_iobase + 6); /* sends to module (V)erify command */ - control = inb(usp->usp_iobase); /* get control register byte */ - - /* waits while reading four bytes will be allowed */ - while (!((control = inb(usp->usp_iobase + 0)) & Rx4CA)) - ; - - /* if four bytes readding error occurs - return 0(false) */ - if ((control & Rx4CA_ERR_MASK)) { - printk("COMEDI: 4 bytes error\n"); - return 0; - } - - if (read_ch) - *data = inw(usp->usp_iobase + 6); /* channel B */ - else - *data = inw(usp->usp_iobase + 4); /* channel A */ - - return 1; -} - -/* configure channels for analog i/o (even to output, odd to input) */ -static void __unioxx5_analog_config(struct unioxx5_subd_priv *usp, int channel) -{ - int chan_a, chan_b, conf, channel_offset; - - channel_offset = __unioxx5_define_chan_offset(channel); - conf = usp->usp_prev_cn_val[channel_offset - 1]; - chan_a = chan_b = 1; - - /* setting channel A and channel B mask */ - if (channel % 2 == 0) { - chan_a <<= channel & 0x07; - chan_b <<= (channel + 1) & 0x07; - } else { - chan_a <<= (channel - 1) & 0x07; - chan_b <<= channel & 0x07; - } - - conf |= chan_a; /* even channel ot output */ - conf &= ~chan_b; /* odd channel to input */ - - outb(1, usp->usp_iobase + 0); - outb(conf, usp->usp_iobase + channel_offset); - outb(0, usp->usp_iobase + 0); - - usp->usp_prev_cn_val[channel_offset - 1] = conf; -} - -/* *\ - * this function defines if the given channel number * - * enters in default numeric interspace(from 0 to 23) * - * and it returns address offset for usage needed * - * channel. * -\* */ - -static int __unioxx5_define_chan_offset(int chan_num) -{ - - if (chan_num < 0 || chan_num > 23) - return -1; - - return (chan_num >> 3) + 1; -} - static int unioxx5_attach(struct comedi_device *dev, struct comedi_devconfig *it) { -- 2.11.0