From d4a972a33932f039fe9dce0cfb2337fee1150f5a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 3 Jul 2014 09:46:51 +0800 Subject: [PATCH] hwmon: (gl518sm) Avoid forward declaration Reorder functions to avoid forward declaration. Signed-off-by: Axel Lin Signed-off-by: Guenter Roeck --- drivers/hwmon/gl518sm.c | 263 +++++++++++++++++++++++------------------------- 1 file changed, 126 insertions(+), 137 deletions(-) diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c index 1e9830513045..0307d8218f87 100644 --- a/drivers/hwmon/gl518sm.c +++ b/drivers/hwmon/gl518sm.c @@ -137,33 +137,98 @@ struct gl518_data { u8 beep_enable; /* Boolean */ }; -static int gl518_probe(struct i2c_client *client, - const struct i2c_device_id *id); -static int gl518_detect(struct i2c_client *client, struct i2c_board_info *info); -static void gl518_init_client(struct i2c_client *client); -static int gl518_remove(struct i2c_client *client); -static int gl518_read_value(struct i2c_client *client, u8 reg); -static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value); -static struct gl518_data *gl518_update_device(struct device *dev); +/* + * Registers 0x07 to 0x0c are word-sized, others are byte-sized + * GL518 uses a high-byte first convention, which is exactly opposite to + * the SMBus standard. + */ +static int gl518_read_value(struct i2c_client *client, u8 reg) +{ + if ((reg >= 0x07) && (reg <= 0x0c)) + return i2c_smbus_read_word_swapped(client, reg); + else + return i2c_smbus_read_byte_data(client, reg); +} -static const struct i2c_device_id gl518_id[] = { - { "gl518sm", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, gl518_id); +static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value) +{ + if ((reg >= 0x07) && (reg <= 0x0c)) + return i2c_smbus_write_word_swapped(client, reg, value); + else + return i2c_smbus_write_byte_data(client, reg, value); +} -/* This is the driver that will be inserted */ -static struct i2c_driver gl518_driver = { - .class = I2C_CLASS_HWMON, - .driver = { - .name = "gl518sm", - }, - .probe = gl518_probe, - .remove = gl518_remove, - .id_table = gl518_id, - .detect = gl518_detect, - .address_list = normal_i2c, -}; +static struct gl518_data *gl518_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct gl518_data *data = i2c_get_clientdata(client); + int val; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + dev_dbg(&client->dev, "Starting gl518 update\n"); + + data->alarms = gl518_read_value(client, GL518_REG_INT); + data->beep_mask = gl518_read_value(client, GL518_REG_ALARM); + + val = gl518_read_value(client, GL518_REG_VDD_LIMIT); + data->voltage_min[0] = val & 0xff; + data->voltage_max[0] = (val >> 8) & 0xff; + val = gl518_read_value(client, GL518_REG_VIN1_LIMIT); + data->voltage_min[1] = val & 0xff; + data->voltage_max[1] = (val >> 8) & 0xff; + val = gl518_read_value(client, GL518_REG_VIN2_LIMIT); + data->voltage_min[2] = val & 0xff; + data->voltage_max[2] = (val >> 8) & 0xff; + val = gl518_read_value(client, GL518_REG_VIN3_LIMIT); + data->voltage_min[3] = val & 0xff; + data->voltage_max[3] = (val >> 8) & 0xff; + + val = gl518_read_value(client, GL518_REG_FAN_COUNT); + data->fan_in[0] = (val >> 8) & 0xff; + data->fan_in[1] = val & 0xff; + + val = gl518_read_value(client, GL518_REG_FAN_LIMIT); + data->fan_min[0] = (val >> 8) & 0xff; + data->fan_min[1] = val & 0xff; + + data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN); + data->temp_max = + gl518_read_value(client, GL518_REG_TEMP_MAX); + data->temp_hyst = + gl518_read_value(client, GL518_REG_TEMP_HYST); + + val = gl518_read_value(client, GL518_REG_MISC); + data->fan_div[0] = (val >> 6) & 0x03; + data->fan_div[1] = (val >> 4) & 0x03; + data->fan_auto1 = (val >> 3) & 0x01; + + data->alarms &= data->alarm_mask; + + val = gl518_read_value(client, GL518_REG_CONF); + data->beep_enable = (val >> 2) & 1; + + if (data->type != gl518sm_r00) { + data->voltage_in[0] = + gl518_read_value(client, GL518_REG_VDD); + data->voltage_in[1] = + gl518_read_value(client, GL518_REG_VIN1); + data->voltage_in[2] = + gl518_read_value(client, GL518_REG_VIN2); + } + data->voltage_in[3] = + gl518_read_value(client, GL518_REG_VIN3); + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} /* * Sysfs stuff @@ -539,6 +604,26 @@ static int gl518_detect(struct i2c_client *client, struct i2c_board_info *info) return 0; } +/* + * Called when we have found a new GL518SM. + * Note that we preserve D4:NoFan2 and D2:beep_enable. + */ +static void gl518_init_client(struct i2c_client *client) +{ + /* Make sure we leave D7:Reset untouched */ + u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f; + + /* Comparator mode (D3=0), standby mode (D6=0) */ + gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37)); + + /* Never interrupts */ + gl518_write_value(client, GL518_REG_MASK, 0x00); + + /* Clear status register (D5=1), start (D6=1) */ + gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue); + gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue); +} + static int gl518_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -584,27 +669,6 @@ exit_remove_files: return err; } - -/* - * Called when we have found a new GL518SM. - * Note that we preserve D4:NoFan2 and D2:beep_enable. - */ -static void gl518_init_client(struct i2c_client *client) -{ - /* Make sure we leave D7:Reset untouched */ - u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f; - - /* Comparator mode (D3=0), standby mode (D6=0) */ - gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37)); - - /* Never interrupts */ - gl518_write_value(client, GL518_REG_MASK, 0x00); - - /* Clear status register (D5=1), start (D6=1) */ - gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue); - gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue); -} - static int gl518_remove(struct i2c_client *client) { struct gl518_data *data = i2c_get_clientdata(client); @@ -617,98 +681,23 @@ static int gl518_remove(struct i2c_client *client) return 0; } -/* - * Registers 0x07 to 0x0c are word-sized, others are byte-sized - * GL518 uses a high-byte first convention, which is exactly opposite to - * the SMBus standard. - */ -static int gl518_read_value(struct i2c_client *client, u8 reg) -{ - if ((reg >= 0x07) && (reg <= 0x0c)) - return i2c_smbus_read_word_swapped(client, reg); - else - return i2c_smbus_read_byte_data(client, reg); -} - -static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value) -{ - if ((reg >= 0x07) && (reg <= 0x0c)) - return i2c_smbus_write_word_swapped(client, reg, value); - else - return i2c_smbus_write_byte_data(client, reg, value); -} - -static struct gl518_data *gl518_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct gl518_data *data = i2c_get_clientdata(client); - int val; - - mutex_lock(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - dev_dbg(&client->dev, "Starting gl518 update\n"); - - data->alarms = gl518_read_value(client, GL518_REG_INT); - data->beep_mask = gl518_read_value(client, GL518_REG_ALARM); - - val = gl518_read_value(client, GL518_REG_VDD_LIMIT); - data->voltage_min[0] = val & 0xff; - data->voltage_max[0] = (val >> 8) & 0xff; - val = gl518_read_value(client, GL518_REG_VIN1_LIMIT); - data->voltage_min[1] = val & 0xff; - data->voltage_max[1] = (val >> 8) & 0xff; - val = gl518_read_value(client, GL518_REG_VIN2_LIMIT); - data->voltage_min[2] = val & 0xff; - data->voltage_max[2] = (val >> 8) & 0xff; - val = gl518_read_value(client, GL518_REG_VIN3_LIMIT); - data->voltage_min[3] = val & 0xff; - data->voltage_max[3] = (val >> 8) & 0xff; - - val = gl518_read_value(client, GL518_REG_FAN_COUNT); - data->fan_in[0] = (val >> 8) & 0xff; - data->fan_in[1] = val & 0xff; - - val = gl518_read_value(client, GL518_REG_FAN_LIMIT); - data->fan_min[0] = (val >> 8) & 0xff; - data->fan_min[1] = val & 0xff; - - data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN); - data->temp_max = - gl518_read_value(client, GL518_REG_TEMP_MAX); - data->temp_hyst = - gl518_read_value(client, GL518_REG_TEMP_HYST); - - val = gl518_read_value(client, GL518_REG_MISC); - data->fan_div[0] = (val >> 6) & 0x03; - data->fan_div[1] = (val >> 4) & 0x03; - data->fan_auto1 = (val >> 3) & 0x01; - - data->alarms &= data->alarm_mask; - - val = gl518_read_value(client, GL518_REG_CONF); - data->beep_enable = (val >> 2) & 1; - - if (data->type != gl518sm_r00) { - data->voltage_in[0] = - gl518_read_value(client, GL518_REG_VDD); - data->voltage_in[1] = - gl518_read_value(client, GL518_REG_VIN1); - data->voltage_in[2] = - gl518_read_value(client, GL518_REG_VIN2); - } - data->voltage_in[3] = - gl518_read_value(client, GL518_REG_VIN3); - - data->last_updated = jiffies; - data->valid = 1; - } - - mutex_unlock(&data->update_lock); +static const struct i2c_device_id gl518_id[] = { + { "gl518sm", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, gl518_id); - return data; -} +static struct i2c_driver gl518_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "gl518sm", + }, + .probe = gl518_probe, + .remove = gl518_remove, + .id_table = gl518_id, + .detect = gl518_detect, + .address_list = normal_i2c, +}; module_i2c_driver(gl518_driver); -- 2.11.0