From da77d76b95a0e8940793f4f7fe12a4a2d2048e39 Mon Sep 17 00:00:00 2001 From: Khiem Nguyen Date: Mon, 5 Feb 2018 04:18:51 +0900 Subject: [PATCH] sata_rcar: Reset SATA PHY when Salvator-X board resumes Because power of Salvator-X board is cut off in suspend, it needs to reset SATA PHY state in resume. Otherwise, SATA partition could not be accessed anymore. Signed-off-by: Khiem Nguyen Signed-off-by: Hien Dang [reinit phy in sata_rcar_resume() function on R-Car Gen3 only] [factor out SATA module init sequence] [fixed the prefix for the subject] Signed-off-by: Yoshihiro Kaneko Signed-off-by: Tejun Heo --- drivers/ata/sata_rcar.c | 63 +++++++++++++++++++++++++++++++------------------ 1 file changed, 40 insertions(+), 23 deletions(-) diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c index 80ee2f2a50d0..6f47ca34767d 100644 --- a/drivers/ata/sata_rcar.c +++ b/drivers/ata/sata_rcar.c @@ -146,6 +146,7 @@ enum sata_rcar_type { RCAR_GEN1_SATA, RCAR_GEN2_SATA, + RCAR_GEN3_SATA, RCAR_R8A7790_ES1_SATA, }; @@ -784,26 +785,11 @@ static void sata_rcar_setup_port(struct ata_host *host) ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << 2); } -static void sata_rcar_init_controller(struct ata_host *host) +static void sata_rcar_init_module(struct sata_rcar_priv *priv) { - struct sata_rcar_priv *priv = host->private_data; void __iomem *base = priv->base; u32 val; - /* reset and setup phy */ - switch (priv->type) { - case RCAR_GEN1_SATA: - sata_rcar_gen1_phy_init(priv); - break; - case RCAR_GEN2_SATA: - case RCAR_R8A7790_ES1_SATA: - sata_rcar_gen2_phy_init(priv); - break; - default: - dev_warn(host->dev, "SATA phy is not initialized\n"); - break; - } - /* SATA-IP reset state */ val = ioread32(base + ATAPI_CONTROL1_REG); val |= ATAPI_CONTROL1_RESET; @@ -824,10 +810,34 @@ static void sata_rcar_init_controller(struct ata_host *host) /* ack and mask */ iowrite32(0, base + SATAINTSTAT_REG); iowrite32(0x7ff, base + SATAINTMASK_REG); + /* enable interrupts */ iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG); } +static void sata_rcar_init_controller(struct ata_host *host) +{ + struct sata_rcar_priv *priv = host->private_data; + void __iomem *base = priv->base; + + /* reset and setup phy */ + switch (priv->type) { + case RCAR_GEN1_SATA: + sata_rcar_gen1_phy_init(priv); + break; + case RCAR_GEN2_SATA: + case RCAR_GEN3_SATA: + case RCAR_R8A7790_ES1_SATA: + sata_rcar_gen2_phy_init(priv); + break; + default: + dev_warn(host->dev, "SATA phy is not initialized\n"); + break; + } + + sata_rcar_init_module(priv); +} + static const struct of_device_id sata_rcar_match[] = { { /* Deprecated by "renesas,sata-r8a7779" */ @@ -856,7 +866,7 @@ static const struct of_device_id sata_rcar_match[] = { }, { .compatible = "renesas,sata-r8a7795", - .data = (void *)RCAR_GEN2_SATA + .data = (void *)RCAR_GEN3_SATA }, { .compatible = "renesas,rcar-gen2-sata", @@ -864,7 +874,7 @@ static const struct of_device_id sata_rcar_match[] = { }, { .compatible = "renesas,rcar-gen3-sata", - .data = (void *)RCAR_GEN2_SATA + .data = (void *)RCAR_GEN3_SATA }, { }, }; @@ -982,11 +992,18 @@ static int sata_rcar_resume(struct device *dev) if (ret) return ret; - /* ack and mask */ - iowrite32(0, base + SATAINTSTAT_REG); - iowrite32(0x7ff, base + SATAINTMASK_REG); - /* enable interrupts */ - iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG); + if (priv->type == RCAR_GEN3_SATA) { + sata_rcar_gen2_phy_init(priv); + sata_rcar_init_module(priv); + } else { + /* ack and mask */ + iowrite32(0, base + SATAINTSTAT_REG); + iowrite32(0x7ff, base + SATAINTMASK_REG); + + /* enable interrupts */ + iowrite32(ATAPI_INT_ENABLE_SATAINT, + base + ATAPI_INT_ENABLE_REG); + } ata_host_resume(host); -- 2.11.0