From df78a0c0b67de58934877aad61e0431a2bd0caf1 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Mon, 1 Jun 2020 23:22:47 -0700 Subject: [PATCH] nl80211: S1G band and channel definitions Gives drivers the definitions needed to advertise support for S1G bands. Signed-off-by: Thomas Pedersen Link: https://lore.kernel.org/r/20200602062247.23212-1-thomas@adapt-ip.com Link: https://lore.kernel.org/r/20200731055636.795173-1-thomas@adapt-ip.com Signed-off-by: Johannes Berg --- drivers/net/wireless/ath/ath10k/mac.c | 9 ++------- include/net/cfg80211.h | 17 +++++++++++++++++ include/uapi/linux/nl80211.h | 16 ++++++++++++++++ net/mac80211/chan.c | 7 ++++++- net/mac80211/scan.c | 1 + net/mac80211/tx.c | 1 + net/mac80211/util.c | 5 +++++ net/wireless/chan.c | 35 +++++++++++++++++++++++++++++++++++ net/wireless/core.c | 5 +++-- net/wireless/util.c | 8 ++++++++ 10 files changed, 94 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 919d15584d4a..3c0c33a9f30c 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -568,11 +568,7 @@ chan_to_phymode(const struct cfg80211_chan_def *chandef) case NL80211_CHAN_WIDTH_40: phymode = MODE_11NG_HT40; break; - case NL80211_CHAN_WIDTH_5: - case NL80211_CHAN_WIDTH_10: - case NL80211_CHAN_WIDTH_80: - case NL80211_CHAN_WIDTH_80P80: - case NL80211_CHAN_WIDTH_160: + default: phymode = MODE_UNKNOWN; break; } @@ -597,8 +593,7 @@ chan_to_phymode(const struct cfg80211_chan_def *chandef) case NL80211_CHAN_WIDTH_80P80: phymode = MODE_11AC_VHT80_80; break; - case NL80211_CHAN_WIDTH_5: - case NL80211_CHAN_WIDTH_10: + default: phymode = MODE_UNKNOWN; break; } diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index fc7e8807838d..ac6e58193426 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -418,6 +418,22 @@ struct ieee80211_edmg { }; /** + * struct ieee80211_sta_s1g_cap - STA's S1G capabilities + * + * This structure describes most essential parameters needed + * to describe 802.11ah S1G capabilities for a STA. + * + * @s1g_supported: is STA an S1G STA + * @cap: S1G capabilities information + * @nss_mcs: Supported NSS MCS set + */ +struct ieee80211_sta_s1g_cap { + bool s1g; + u8 cap[10]; /* use S1G_CAPAB_ */ + u8 nss_mcs[5]; +}; + +/** * struct ieee80211_supported_band - frequency band definition * * This structure describes a frequency band a wiphy @@ -448,6 +464,7 @@ struct ieee80211_supported_band { int n_bitrates; struct ieee80211_sta_ht_cap ht_cap; struct ieee80211_sta_vht_cap vht_cap; + struct ieee80211_sta_s1g_cap s1g_cap; struct ieee80211_edmg edmg_cap; u16 n_iftype_data; const struct ieee80211_sband_iftype_data *iftype_data; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 4e6339ab1fce..ad183469f9af 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -4437,6 +4437,11 @@ enum nl80211_key_mode { * attribute must be provided as well * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel + * @NL80211_CHAN_WIDTH_1: 1 MHz OFDM channel + * @NL80211_CHAN_WIDTH_2: 2 MHz OFDM channel + * @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel + * @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel + * @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel */ enum nl80211_chan_width { NL80211_CHAN_WIDTH_20_NOHT, @@ -4447,6 +4452,11 @@ enum nl80211_chan_width { NL80211_CHAN_WIDTH_160, NL80211_CHAN_WIDTH_5, NL80211_CHAN_WIDTH_10, + NL80211_CHAN_WIDTH_1, + NL80211_CHAN_WIDTH_2, + NL80211_CHAN_WIDTH_4, + NL80211_CHAN_WIDTH_8, + NL80211_CHAN_WIDTH_16, }; /** @@ -4457,11 +4467,15 @@ enum nl80211_chan_width { * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide + * @NL80211_BSS_CHAN_WIDTH_1: control channel is 1 MHz wide + * @NL80211_BSS_CHAN_WIDTH_2: control channel is 2 MHz wide */ enum nl80211_bss_scan_width { NL80211_BSS_CHAN_WIDTH_20, NL80211_BSS_CHAN_WIDTH_10, NL80211_BSS_CHAN_WIDTH_5, + NL80211_BSS_CHAN_WIDTH_1, + NL80211_BSS_CHAN_WIDTH_2, }; /** @@ -4740,6 +4754,7 @@ enum nl80211_txrate_gi { * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz) * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz) + * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace * since newer kernel versions may support more bands */ @@ -4748,6 +4763,7 @@ enum nl80211_band { NL80211_BAND_5GHZ, NL80211_BAND_60GHZ, NL80211_BAND_6GHZ, + NL80211_BAND_S1GHZ, NUM_NL80211_BANDS, }; diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index e6e192f53e4e..08cf9da9c1e3 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -313,9 +313,14 @@ void ieee80211_recalc_chanctx_min_def(struct ieee80211_local *local, lockdep_assert_held(&local->chanctx_mtx); - /* don't optimize 5MHz, 10MHz, and radar_enabled confs */ + /* don't optimize non-20MHz based and radar_enabled confs */ if (ctx->conf.def.width == NL80211_CHAN_WIDTH_5 || ctx->conf.def.width == NL80211_CHAN_WIDTH_10 || + ctx->conf.def.width == NL80211_CHAN_WIDTH_1 || + ctx->conf.def.width == NL80211_CHAN_WIDTH_2 || + ctx->conf.def.width == NL80211_CHAN_WIDTH_4 || + ctx->conf.def.width == NL80211_CHAN_WIDTH_8 || + ctx->conf.def.width == NL80211_CHAN_WIDTH_16 || ctx->conf.radar_enabled) { ctx->conf.min_def = ctx->conf.def; return; diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index ad90bbe57457..8003be6dae8a 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -913,6 +913,7 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local, case NL80211_BSS_CHAN_WIDTH_10: local->scan_chandef.width = NL80211_CHAN_WIDTH_10; break; + default: case NL80211_BSS_CHAN_WIDTH_20: /* If scanning on oper channel, use whatever channel-type * is currently in use. diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 1a2941e5244f..ee30ef441f4a 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -166,6 +166,7 @@ static __le16 ieee80211_duration(struct ieee80211_tx_data *tx, if (r->flags & IEEE80211_RATE_MANDATORY_A) mrate = r->bitrate; break; + case NL80211_BAND_S1GHZ: case NL80211_BAND_60GHZ: /* TODO, for now fall through */ case NUM_NL80211_BANDS: diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 21c94094a699..64a83ecd0a73 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -3730,6 +3730,11 @@ u32 ieee80211_chandef_downgrade(struct cfg80211_chan_def *c) c->width = NL80211_CHAN_WIDTH_20_NOHT; ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; break; + case NL80211_CHAN_WIDTH_1: + case NL80211_CHAN_WIDTH_2: + case NL80211_CHAN_WIDTH_4: + case NL80211_CHAN_WIDTH_8: + case NL80211_CHAN_WIDTH_16: case NL80211_CHAN_WIDTH_5: case NL80211_CHAN_WIDTH_10: WARN_ON_ONCE(1); diff --git a/net/wireless/chan.c b/net/wireless/chan.c index cddf92c5d09e..90f0f82cd9ca 100644 --- a/net/wireless/chan.c +++ b/net/wireless/chan.c @@ -153,6 +153,11 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef) control_freq = chandef->chan->center_freq; switch (chandef->width) { + case NL80211_CHAN_WIDTH_1: + case NL80211_CHAN_WIDTH_2: + case NL80211_CHAN_WIDTH_4: + case NL80211_CHAN_WIDTH_8: + case NL80211_CHAN_WIDTH_16: case NL80211_CHAN_WIDTH_5: case NL80211_CHAN_WIDTH_10: case NL80211_CHAN_WIDTH_20: @@ -263,6 +268,21 @@ static int cfg80211_chandef_get_width(const struct cfg80211_chan_def *c) int width; switch (c->width) { + case NL80211_CHAN_WIDTH_1: + width = 1; + break; + case NL80211_CHAN_WIDTH_2: + width = 2; + break; + case NL80211_CHAN_WIDTH_4: + width = 4; + break; + case NL80211_CHAN_WIDTH_8: + width = 8; + break; + case NL80211_CHAN_WIDTH_16: + width = 16; + break; case NL80211_CHAN_WIDTH_5: width = 5; break; @@ -911,6 +931,21 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, control_freq = chandef->chan->center_freq; switch (chandef->width) { + case NL80211_CHAN_WIDTH_1: + width = 1; + break; + case NL80211_CHAN_WIDTH_2: + width = 2; + break; + case NL80211_CHAN_WIDTH_4: + width = 4; + break; + case NL80211_CHAN_WIDTH_8: + width = 8; + break; + case NL80211_CHAN_WIDTH_16: + width = 16; + break; case NL80211_CHAN_WIDTH_5: width = 5; break; diff --git a/net/wireless/core.c b/net/wireless/core.c index c623d9bf5096..1971d7e6eb55 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -803,10 +803,11 @@ int wiphy_register(struct wiphy *wiphy) if (WARN_ON(!sband->n_channels)) return -EINVAL; /* - * on 60GHz band, there are no legacy rates, so + * on 60GHz or sub-1Ghz band, there are no legacy rates, so * n_bitrates is 0 */ - if (WARN_ON(band != NL80211_BAND_60GHZ && + if (WARN_ON((band != NL80211_BAND_60GHZ && + band != NL80211_BAND_S1GHZ) && !sband->n_bitrates)) return -EINVAL; diff --git a/net/wireless/util.c b/net/wireless/util.c index 4d3b76f94f55..26a977343c3b 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -102,6 +102,8 @@ u32 ieee80211_channel_to_freq_khz(int chan, enum nl80211_band band) if (chan < 7) return MHZ_TO_KHZ(56160 + chan * 2160); break; + case NL80211_BAND_S1GHZ: + return 902000 + chan * 500; default: ; } @@ -210,6 +212,12 @@ static void set_mandatory_flags_band(struct ieee80211_supported_band *sband) WARN_ON(!sband->ht_cap.ht_supported); WARN_ON((sband->ht_cap.mcs.rx_mask[0] & 0x1e) != 0x1e); break; + case NL80211_BAND_S1GHZ: + /* Figure 9-589bd: 3 means unsupported, so != 3 means at least + * mandatory is ok. + */ + WARN_ON((sband->s1g_cap.nss_mcs[0] & 0x3) == 0x3); + break; case NUM_NL80211_BANDS: default: WARN_ON(1); -- 2.11.0