From e10db1f00a5e3c2ec04d7fe26c7444dc55a59b19 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Fri, 4 May 2012 21:42:05 -0400 Subject: [PATCH] mtd: gpmi: add device tree support to gpmi-nand This patch just adds the DT support to gpmi-nand. Signed-off-by: Huang Shijie Signed-off-by: Huang Shijie Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- .../devicetree/bindings/mtd/gpmi-nand.txt | 33 ++++++ drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 7 +- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 126 ++++++++++----------- drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 4 +- include/linux/mtd/gpmi-nand.h | 8 +- 5 files changed, 105 insertions(+), 73 deletions(-) create mode 100644 Documentation/devicetree/bindings/mtd/gpmi-nand.txt diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt new file mode 100644 index 000000000000..1a5bbd346d22 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt @@ -0,0 +1,33 @@ +* Freescale General-Purpose Media Interface (GPMI) + +The GPMI nand controller provides an interface to control the +NAND flash chips. We support only one NAND chip now. + +Required properties: + - compatible : should be "fsl,-gpmi-nand" + - reg : should contain registers location and length for gpmi and bch. + - reg-names: Should contain the reg names "gpmi-nand" and "bch" + - interrupts : The first is the DMA interrupt number for GPMI. + The second is the BCH interrupt number. + - interrupt-names : The interrupt names "gpmi-dma", "bch"; + - fsl,gpmi-dma-channel : Should contain the dma channel it uses. + +The device tree may optionally contain sub-nodes describing partitions of the +address space. See partition.txt for more detail. + +Examples: + +gpmi-nand@8000c000 { + compatible = "fsl,imx28-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <88>, <41>; + interrupt-names = "gpmi-dma", "bch"; + fsl,gpmi-dma-channel = <4>; + + partition@0 { + ... + }; +}; diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index fa5200b8c895..5c55c717fe14 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -256,11 +256,12 @@ static unsigned int ns_to_cycles(unsigned int time, return max(k, min); } +#define DEF_MIN_PROP_DELAY 5 +#define DEF_MAX_PROP_DELAY 9 /* Apply timing to current hardware conditions. */ static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this, struct gpmi_nfc_hardware_timing *hw) { - struct gpmi_nand_platform_data *pdata = this->pdata; struct timing_threshod *nfc = &timing_default_threshold; struct nand_chip *nand = &this->nand; struct nand_timing target = this->timing; @@ -277,8 +278,8 @@ static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this, int ideal_sample_delay_in_ns; unsigned int sample_delay_factor; int tEYE; - unsigned int min_prop_delay_in_ns = pdata->min_prop_delay_in_ns; - unsigned int max_prop_delay_in_ns = pdata->max_prop_delay_in_ns; + unsigned int min_prop_delay_in_ns = DEF_MIN_PROP_DELAY; + unsigned int max_prop_delay_in_ns = DEF_MAX_PROP_DELAY; /* * If there are multiple chips, we need to relax the timings to allow diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 7e8a035d444a..d9dc4c874ffa 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -24,6 +24,8 @@ #include #include #include +#include +#include #include "gpmi-nand.h" /* add our owner bbt descriptor */ @@ -386,7 +388,7 @@ static void release_bch_irq(struct gpmi_nand_data *this) static bool gpmi_dma_filter(struct dma_chan *chan, void *param) { struct gpmi_nand_data *this = param; - struct resource *r = this->private; + int dma_channel = (int)this->private; if (!mxs_dma_is_apbh(chan)) return false; @@ -398,7 +400,7 @@ static bool gpmi_dma_filter(struct dma_chan *chan, void *param) * for mx28 : MX28_DMA_GPMI0 ~ MX28_DMA_GPMI7 * (These eight channels share the same IRQ!) */ - if (r->start <= chan->chan_id && chan->chan_id <= r->end) { + if (dma_channel == chan->chan_id) { chan->private = &this->dma_data; return true; } @@ -418,57 +420,45 @@ static void release_dma_channels(struct gpmi_nand_data *this) static int __devinit acquire_dma_channels(struct gpmi_nand_data *this) { struct platform_device *pdev = this->pdev; - struct gpmi_nand_platform_data *pdata = this->pdata; - struct resources *res = &this->resources; - struct resource *r, *r_dma; - unsigned int i; + struct resource *r_dma; + struct device_node *dn; + int dma_channel; + unsigned int ret; + struct dma_chan *dma_chan; + dma_cap_mask_t mask; + + /* dma channel, we only use the first one. */ + dn = pdev->dev.of_node; + ret = of_property_read_u32(dn, "fsl,gpmi-dma-channel", &dma_channel); + if (ret) { + pr_err("unable to get DMA channel from dt.\n"); + goto acquire_err; + } + this->private = (void *)dma_channel; - r = platform_get_resource_byname(pdev, IORESOURCE_DMA, - GPMI_NAND_DMA_CHANNELS_RES_NAME); + /* gpmi dma interrupt */ r_dma = platform_get_resource_byname(pdev, IORESOURCE_IRQ, GPMI_NAND_DMA_INTERRUPT_RES_NAME); - if (!r || !r_dma) { + if (!r_dma) { pr_err("Can't get resource for DMA\n"); - return -ENXIO; + goto acquire_err; } + this->dma_data.chan_irq = r_dma->start; - /* used in gpmi_dma_filter() */ - this->private = r; - - for (i = r->start; i <= r->end; i++) { - struct dma_chan *dma_chan; - dma_cap_mask_t mask; + /* request dma channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); - if (i - r->start >= pdata->max_chip_count) - break; - - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - - /* get the DMA interrupt */ - if (r_dma->start == r_dma->end) { - /* only register the first. */ - if (i == r->start) - this->dma_data.chan_irq = r_dma->start; - else - this->dma_data.chan_irq = NO_IRQ; - } else - this->dma_data.chan_irq = r_dma->start + (i - r->start); - - dma_chan = dma_request_channel(mask, gpmi_dma_filter, this); - if (!dma_chan) - goto acquire_err; - - /* fill the first empty item */ - this->dma_chans[i - r->start] = dma_chan; + dma_chan = dma_request_channel(mask, gpmi_dma_filter, this); + if (!dma_chan) { + pr_err("dma_request_channel failed.\n"); + goto acquire_err; } - res->dma_low_channel = r->start; - res->dma_high_channel = i; + this->dma_chans[0] = dma_chan; return 0; acquire_err: - pr_err("Can't acquire DMA channel %u\n", i); release_dma_channels(this); return -EINVAL; } @@ -1465,9 +1455,9 @@ void gpmi_nfc_exit(struct gpmi_nand_data *this) static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this) { - struct gpmi_nand_platform_data *pdata = this->pdata; struct mtd_info *mtd = &this->mtd; struct nand_chip *chip = &this->nand; + struct mtd_part_parser_data ppdata = {}; int ret; /* init current chip */ @@ -1505,14 +1495,14 @@ static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this) if (ret) goto err_out; - ret = nand_scan(mtd, pdata->max_chip_count); + ret = nand_scan(mtd, 1); if (ret) { pr_err("Chip scan failed\n"); goto err_out; } - ret = mtd_device_parse_register(mtd, NULL, NULL, - pdata->partitions, pdata->partition_count); + ppdata.of_node = this->pdev->dev.of_node; + ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0); if (ret) goto err_out; return 0; @@ -1522,12 +1512,37 @@ err_out: return ret; } +static const struct platform_device_id gpmi_ids[] = { + { .name = "imx23-gpmi-nand", .driver_data = IS_MX23, }, + { .name = "imx28-gpmi-nand", .driver_data = IS_MX28, }, + {}, +}; + +static const struct of_device_id gpmi_nand_id_table[] = { + { + .compatible = "fsl,imx23-gpmi-nand", + .data = (void *)&gpmi_ids[IS_MX23] + }, { + .compatible = "fsl,imx28-gpmi-nand", + .data = (void *)&gpmi_ids[IS_MX28] + }, {} +}; +MODULE_DEVICE_TABLE(of, gpmi_nand_id_table); + static int __devinit gpmi_nand_probe(struct platform_device *pdev) { - struct gpmi_nand_platform_data *pdata = pdev->dev.platform_data; struct gpmi_nand_data *this; + const struct of_device_id *of_id; int ret; + of_id = of_match_device(gpmi_nand_id_table, &pdev->dev); + if (of_id) { + pdev->id_entry = of_id->data; + } else { + pr_err("Failed to find the right device id.\n"); + return -ENOMEM; + } + this = kzalloc(sizeof(*this), GFP_KERNEL); if (!this) { pr_err("Failed to allocate per-device memory\n"); @@ -1537,13 +1552,6 @@ static int __devinit gpmi_nand_probe(struct platform_device *pdev) platform_set_drvdata(pdev, this); this->pdev = pdev; this->dev = &pdev->dev; - this->pdata = pdata; - - if (pdata->platform_init) { - ret = pdata->platform_init(); - if (ret) - goto platform_init_error; - } ret = acquire_resources(this); if (ret) @@ -1561,7 +1569,6 @@ static int __devinit gpmi_nand_probe(struct platform_device *pdev) exit_nfc_init: release_resources(this); -platform_init_error: exit_acquire_resources: platform_set_drvdata(pdev, NULL); kfree(this); @@ -1579,19 +1586,10 @@ static int __exit gpmi_nand_remove(struct platform_device *pdev) return 0; } -static const struct platform_device_id gpmi_ids[] = { - { - .name = "imx23-gpmi-nand", - .driver_data = IS_MX23, - }, { - .name = "imx28-gpmi-nand", - .driver_data = IS_MX28, - }, {}, -}; - static struct platform_driver gpmi_nand_driver = { .driver = { .name = "gpmi-nand", + .of_match_table = gpmi_nand_id_table, }, .probe = gpmi_nand_probe, .remove = __exit_p(gpmi_nand_remove), diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h index ec6180d4ff8f..12fdd7767c1c 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h @@ -266,8 +266,8 @@ extern int gpmi_read_page(struct gpmi_nand_data *, #define STATUS_UNCORRECTABLE 0xfe /* Use the platform_id to distinguish different Archs. */ -#define IS_MX23 0x1 -#define IS_MX28 0x2 +#define IS_MX23 0x0 +#define IS_MX28 0x1 #define GPMI_IS_MX23(x) ((x)->pdev->id_entry->driver_data == IS_MX23) #define GPMI_IS_MX28(x) ((x)->pdev->id_entry->driver_data == IS_MX28) #endif diff --git a/include/linux/mtd/gpmi-nand.h b/include/linux/mtd/gpmi-nand.h index 69b6dbf46b5e..ed3c4e09f3d1 100644 --- a/include/linux/mtd/gpmi-nand.h +++ b/include/linux/mtd/gpmi-nand.h @@ -23,12 +23,12 @@ #define GPMI_NAND_RES_SIZE 6 /* Resource names for the GPMI NAND driver. */ -#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "GPMI NAND GPMI Registers" +#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "gpmi-nand" #define GPMI_NAND_GPMI_INTERRUPT_RES_NAME "GPMI NAND GPMI Interrupt" -#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME "GPMI NAND BCH Registers" -#define GPMI_NAND_BCH_INTERRUPT_RES_NAME "GPMI NAND BCH Interrupt" +#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME "bch" +#define GPMI_NAND_BCH_INTERRUPT_RES_NAME "bch" #define GPMI_NAND_DMA_CHANNELS_RES_NAME "GPMI NAND DMA Channels" -#define GPMI_NAND_DMA_INTERRUPT_RES_NAME "GPMI NAND DMA Interrupt" +#define GPMI_NAND_DMA_INTERRUPT_RES_NAME "gpmi-dma" /** * struct gpmi_nand_platform_data - GPMI NAND driver platform data. -- 2.11.0