From e1324ece2af442f60f77c42b141db6549fda6afd Mon Sep 17 00:00:00 2001
From: Fabio Estevam <festevam@gmail.com>
Date: Wed, 2 Sep 2020 09:49:51 -0300
Subject: [PATCH] ARM: imx: Remove i.MX35 board files

i.MX35 has basic device tree support.

To achieve the goal of converting all i.MX SoCs to a
devicetree-only platform, remove imx35 board files.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm/configs/imx_v6_v7_defconfig           |   5 +-
 arch/arm/mach-imx/Kconfig                      |  73 +---
 arch/arm/mach-imx/Makefile                     |   8 +-
 arch/arm/mach-imx/{imx35-dt.c => mach-imx35.c} |   0
 arch/arm/mach-imx/mach-mx35_3ds.c              | 516 -------------------------
 arch/arm/mach-imx/mach-pcm043.c                | 412 --------------------
 arch/arm/mach-imx/mach-vpr200.c                | 306 ---------------
 7 files changed, 10 insertions(+), 1310 deletions(-)
 rename arch/arm/mach-imx/{imx35-dt.c => mach-imx35.c} (100%)
 delete mode 100644 arch/arm/mach-imx/mach-mx35_3ds.c
 delete mode 100644 arch/arm/mach-imx/mach-pcm043.c
 delete mode 100644 arch/arm/mach-imx/mach-vpr200.c

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 0220aa5d2571..e1d83018d022 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -15,11 +15,8 @@ CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_MXC=y
-CONFIG_MACH_IMX35_DT=y
-CONFIG_MACH_PCM043=y
-CONFIG_MACH_MX35_3DS=y
-CONFIG_MACH_VPR200=y
 CONFIG_SOC_IMX31=y
+CONFIG_SOC_IMX35=y
 CONFIG_SOC_IMX50=y
 CONFIG_SOC_IMX51=y
 CONFIG_SOC_IMX53=y
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 78475ef7e5d9..c23e10fa8242 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -53,14 +53,10 @@ config IMX_HAVE_IOMUX_V1
 config ARCH_MXC_IOMUX_V3
 	bool
 
-config SOC_IMX35
-	bool
-	select ARCH_MXC_IOMUX_V3
-	select MXC_AVIC
-	select PINCTRL_IMX35
-
 if ARCH_MULTI_V6
 
+comment "ARM1136 platforms"
+
 config SOC_IMX31
 	bool "i.MX31 support"
 	select CPU_V6
@@ -68,66 +64,13 @@ config SOC_IMX31
 	help
 	  This enables support for Freescale i.MX31 processor
 
-comment "MX35 platforms:"
-
-config MACH_IMX35_DT
-	bool "Support i.MX35 platforms from device tree"
-	select SOC_IMX35
-	help
-	  Include support for Freescale i.MX35 based platforms
-	  using the device tree for discovery.
-
-config MACH_PCM043
-	bool "Support Phytec pcm043 (i.MX35) platforms"
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select USB_ULPI_VIEWPORT if USB_ULPI
-	select SOC_IMX35
-	help
-	  Include support for Phytec pcm043 platform. This includes
-	  specific configurations for the board and its peripherals.
-
-config MACH_MX35_3DS
-	bool "Support MX35PDK platform"
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_MXC_RTC
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select MXC_DEBUG_BOARD
-	select SOC_IMX35
-	help
-	  Include support for MX35PDK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_VPR200
-	bool "Support VPR200 platform"
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select SOC_IMX35
+config SOC_IMX35
+	bool "i.MX35 support"
+	select ARCH_MXC_IOMUX_V3
+	select MXC_AVIC
+	select PINCTRL_IMX35
 	help
-	  Include support for VPR200 platform. This includes specific
-	  configurations for the board and its peripherals.
+	  This enables support for Freescale i.MX31 processor
 
 endif
 
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 1b3c0cad148b..d6607f3000d9 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -7,7 +7,7 @@ obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o mach-imx27.o
 obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o
 
 obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o mach-imx31.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o mach-imx35.o
 
 imx5-pm-$(CONFIG_PM) += pm-imx5.o
 obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y)
@@ -35,12 +35,6 @@ obj-y += ssi-fiq.o
 obj-y += ssi-fiq-ksym.o
 endif
 
-# i.MX35 based machines
-obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
-obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
-obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
-obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o
-
 obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/mach-imx35.c
similarity index 100%
rename from arch/arm/mach-imx/imx35-dt.c
rename to arch/arm/mach-imx/mach-imx35.c
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
deleted file mode 100644
index 802e0abe4568..000000000000
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ /dev/null
@@ -1,516 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * Copyright (C) 2011 Meprolight, Ltd.
- * Alex Gershgorin <alexg@meprolight.com>
- *
- * Modified from i.MX31 3-Stack Development System
- */
-
-/*
- * This machine is known as:
- *  - i.MX35 3-Stack Development System
- *  - i.MX35 Platform Development Kit (i.MX35 PDK)
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/usb/otg.h>
-
-#include <linux/mtd/physmap.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <video/platform_lcd.h>
-
-#include "3ds_debugboard.h"
-#include "common.h"
-#include "devices-imx35.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx35.h"
-
-#define GPIO_MC9S08DZ60_GPS_ENABLE 0
-#define GPIO_MC9S08DZ60_HDD_ENABLE 4
-#define GPIO_MC9S08DZ60_WIFI_ENABLE 5
-#define GPIO_MC9S08DZ60_LCD_ENABLE 6
-#define GPIO_MC9S08DZ60_SPEAKER_ENABLE 8
-
-static const struct fb_videomode fb_modedb[] = {
-	{
-		 /* 800x480 @ 55 Hz */
-		.name = "Ceramate-CLAA070VC01",
-		.refresh = 55,
-		.xres = 800,
-		.yres = 480,
-		.pixclock = 40000,
-		.left_margin = 40,
-		.right_margin = 40,
-		.upper_margin = 5,
-		.lower_margin = 5,
-		.hsync_len = 20,
-		.vsync_len = 10,
-		.sync = FB_SYNC_OE_ACT_HIGH,
-		.vmode = FB_VMODE_NONINTERLACED,
-		.flag = 0,
-	 },
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
-	.name = "Ceramate-CLAA070VC01",
-	.mode = fb_modedb,
-	.num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-static struct i2c_board_info __initdata i2c_devices_3ds[] = {
-	{
-		I2C_BOARD_INFO("mc9s08dz60", 0x69),
-	},
-};
-
-static int lcd_power_gpio = -ENXIO;
-
-static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip, void *data)
-{
-	return !strcmp(chip->label, data);
-}
-
-static void mx35_3ds_lcd_set_power(
-				struct plat_lcd_data *pd, unsigned int power)
-{
-	struct gpio_chip *chip;
-
-	if (!gpio_is_valid(lcd_power_gpio)) {
-		chip = gpiochip_find(
-				"mc9s08dz60", mc9s08dz60_gpiochip_match);
-		if (chip) {
-			lcd_power_gpio =
-				chip->base + GPIO_MC9S08DZ60_LCD_ENABLE;
-			if (gpio_request(lcd_power_gpio, "lcd_power") < 0) {
-				pr_err("error: gpio already requested!\n");
-				lcd_power_gpio = -ENXIO;
-			}
-		} else {
-			pr_err("error: didn't find mc9s08dz60 gpio chip\n");
-		}
-	}
-
-	if (gpio_is_valid(lcd_power_gpio))
-		gpio_set_value_cansleep(lcd_power_gpio, power);
-}
-
-static struct plat_lcd_data mx35_3ds_lcd_data = {
-	.set_power = mx35_3ds_lcd_set_power,
-};
-
-static struct platform_device mx35_3ds_lcd = {
-	.name = "platform-lcd",
-	.dev.platform_data = &mx35_3ds_lcd_data,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct physmap_flash_data mx35pdk_flash_data = {
-	.width  = 2,
-};
-
-static struct resource mx35pdk_flash_resource = {
-	.start	= MX35_CS0_BASE_ADDR,
-	.end	= MX35_CS0_BASE_ADDR + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device mx35pdk_flash = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &mx35pdk_flash_data,
-	},
-	.resource = &mx35pdk_flash_resource,
-	.num_resources = 1,
-};
-
-static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-	.flash_bbt = 1,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&mx35pdk_flash,
-};
-
-static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = {
-	/* UART1 */
-	MX35_PAD_CTS1__UART1_CTS,
-	MX35_PAD_RTS1__UART1_RTS,
-	MX35_PAD_TXD1__UART1_TXD_MUX,
-	MX35_PAD_RXD1__UART1_RXD_MUX,
-	/* FEC */
-	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX35_PAD_FEC_COL__FEC_COL,
-	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX35_PAD_FEC_MDC__FEC_MDC,
-	MX35_PAD_FEC_MDIO__FEC_MDIO,
-	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-	MX35_PAD_FEC_CRS__FEC_CRS,
-	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-	/* USBOTG */
-	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
-	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
-	/* USBH1 */
-	MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
-	MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
-	/* SDCARD */
-	MX35_PAD_SD1_CMD__ESDHC1_CMD,
-	MX35_PAD_SD1_CLK__ESDHC1_CLK,
-	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
-	/* I2C1 */
-	MX35_PAD_I2C1_CLK__I2C1_SCL,
-	MX35_PAD_I2C1_DAT__I2C1_SDA,
-	/* Display */
-	MX35_PAD_LD0__IPU_DISPB_DAT_0,
-	MX35_PAD_LD1__IPU_DISPB_DAT_1,
-	MX35_PAD_LD2__IPU_DISPB_DAT_2,
-	MX35_PAD_LD3__IPU_DISPB_DAT_3,
-	MX35_PAD_LD4__IPU_DISPB_DAT_4,
-	MX35_PAD_LD5__IPU_DISPB_DAT_5,
-	MX35_PAD_LD6__IPU_DISPB_DAT_6,
-	MX35_PAD_LD7__IPU_DISPB_DAT_7,
-	MX35_PAD_LD8__IPU_DISPB_DAT_8,
-	MX35_PAD_LD9__IPU_DISPB_DAT_9,
-	MX35_PAD_LD10__IPU_DISPB_DAT_10,
-	MX35_PAD_LD11__IPU_DISPB_DAT_11,
-	MX35_PAD_LD12__IPU_DISPB_DAT_12,
-	MX35_PAD_LD13__IPU_DISPB_DAT_13,
-	MX35_PAD_LD14__IPU_DISPB_DAT_14,
-	MX35_PAD_LD15__IPU_DISPB_DAT_15,
-	MX35_PAD_LD16__IPU_DISPB_DAT_16,
-	MX35_PAD_LD17__IPU_DISPB_DAT_17,
-	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
-	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
-	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
-	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
-	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
-	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
-	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
-	/*PMIC IRQ*/
-	MX35_PAD_GPIO2_0__GPIO2_0,
-};
-
-static struct regulator_consumer_supply sw1_consumers[] = {
-	{
-		.supply = "cpu_vcc",
-	}
-};
-
-static struct regulator_consumer_supply vcam_consumers[] = {
-	/* sgtl5000 */
-	REGULATOR_SUPPLY("VDDA", "0-000a"),
-};
-
-static struct regulator_init_data sw1_init = {
-	.constraints = {
-		.name = "SW1",
-		.min_uV = 600000,
-		.max_uV = 1375000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.valid_modes_mask = 0,
-		.always_on = 1,
-		.boot_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
-	.consumer_supplies = sw1_consumers,
-};
-
-static struct regulator_init_data sw2_init = {
-	.constraints = {
-		.name = "SW2",
-		.always_on = 1,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data sw3_init = {
-	.constraints = {
-		.name = "SW3",
-		.always_on = 1,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data sw4_init = {
-	.constraints = {
-		.name = "SW4",
-		.always_on = 1,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data viohi_init = {
-	.constraints = {
-		.name = "VIOHI",
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vusb_init = {
-	.constraints = {
-		.name = "VUSB",
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vdig_init = {
-	.constraints = {
-		.name = "VDIG",
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vpll_init = {
-	.constraints = {
-		.name = "VPLL",
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vusb2_init = {
-	.constraints = {
-		.name = "VUSB2",
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vvideo_init = {
-	.constraints = {
-		.name = "VVIDEO",
-		.boot_on = 1
-	}
-};
-
-static struct regulator_init_data vcam_init = {
-	.constraints = {
-		.name = "VCAM",
-		.min_uV = 2500000,
-		.max_uV = 3000000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					REGULATOR_CHANGE_MODE,
-		.valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
-		.boot_on = 1
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vcam_consumers),
-	.consumer_supplies = vcam_consumers,
-};
-
-static struct regulator_init_data vgen1_init = {
-	.constraints = {
-		.name = "VGEN1",
-	}
-};
-
-static struct regulator_init_data vgen2_init = {
-	.constraints = {
-		.name = "VGEN2",
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vgen3_init = {
-	.constraints = {
-		.name = "VGEN3",
-	}
-};
-
-static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = {
-	{ .id = MC13892_SW1, .init_data = &sw1_init },
-	{ .id = MC13892_SW2, .init_data = &sw2_init },
-	{ .id = MC13892_SW3, .init_data = &sw3_init },
-	{ .id = MC13892_SW4, .init_data = &sw4_init },
-	{ .id = MC13892_VIOHI, .init_data = &viohi_init },
-	{ .id = MC13892_VPLL, .init_data = &vpll_init },
-	{ .id = MC13892_VDIG, .init_data = &vdig_init },
-	{ .id = MC13892_VUSB2, .init_data = &vusb2_init },
-	{ .id = MC13892_VVIDEO, .init_data = &vvideo_init },
-	{ .id = MC13892_VCAM, .init_data = &vcam_init },
-	{ .id = MC13892_VGEN1, .init_data = &vgen1_init },
-	{ .id = MC13892_VGEN2, .init_data = &vgen2_init },
-	{ .id = MC13892_VGEN3, .init_data = &vgen3_init },
-	{ .id = MC13892_VUSB, .init_data = &vusb_init },
-};
-
-static struct mc13xxx_platform_data mx35_3ds_mc13892_data = {
-	.flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
-	.regulators = {
-		.num_regulators = ARRAY_SIZE(mx35_3ds_regulators),
-		.regulators = mx35_3ds_regulators,
-	},
-};
-
-#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
-
-static struct i2c_board_info mx35_3ds_i2c_mc13892 = {
-
-	I2C_BOARD_INFO("mc13892", 0x08),
-	.platform_data = &mx35_3ds_mc13892_data,
-	/* irq number is run-time assigned */
-};
-
-static void __init imx35_3ds_init_mc13892(void)
-{
-	int ret = gpio_request_one(GPIO_PMIC_INT, GPIOF_DIR_IN, "pmic irq");
-
-	if (ret) {
-		pr_err("failed to get pmic irq: %d\n", ret);
-		return;
-	}
-
-	mx35_3ds_i2c_mc13892.irq = gpio_to_irq(GPIO_PMIC_INT);
-	i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1);
-}
-
-static int mx35_3ds_otg_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-
-/* OTG config */
-static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
-	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
-/*
- * ENGCM09152 also requires a hardware change.
- * Please check the MX35 Chip Errata document for details.
- */
-};
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
-	.init	= mx35_3ds_otg_init,
-	.portsc	= MXC_EHCI_MODE_UTMI,
-};
-
-static int mx35_3ds_usbh_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
-			  MXC_EHCI_INTERNAL_PHY);
-}
-
-/* USB HOST config */
-static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
-	.init		= mx35_3ds_usbh_init,
-	.portsc		= MXC_EHCI_MODE_SERIAL,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init mx35_3ds_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = true;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = false;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 1;
-}
-__setup("otg_mode=", mx35_3ds_otg_mode);
-
-static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
-	.bitrate = 100000,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mx35_3ds_init(void)
-{
-	imx35_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
-
-	imx35_add_fec(NULL);
-	imx35_add_imx2_wdt();
-	imx35_add_mxc_rtc();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	imx35_add_imx_uart0(&uart_pdata);
-
-	if (otg_mode_host)
-		imx35_add_mxc_ehci_otg(&otg_pdata);
-
-	imx35_add_mxc_ehci_hs(&usb_host_pdata);
-
-	if (!otg_mode_host)
-		imx35_add_fsl_usb2_udc(&usb_otg_pdata);
-
-	imx35_add_mxc_nand(&mx35pdk_nand_board_info);
-	imx35_add_sdhci_esdhc_imx(0, NULL);
-
-	imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
-
-	i2c_register_board_info(
-		0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds));
-
-	imx35_add_ipu_core();
-}
-
-static void __init mx35_3ds_late_init(void)
-{
-	struct platform_device *imx35_fb_pdev;
-
-	if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1)))
-		pr_warn("Init of the debugboard failed, all "
-			"devices on the debugboard are unusable.\n");
-
-	imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-	mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev;
-	platform_device_register(&mx35_3ds_lcd);
-
-	imx35_3ds_init_mc13892();
-}
-
-static void __init mx35pdk_timer_init(void)
-{
-	mx35_clocks_init();
-}
-
-MACHINE_START(MX35_3DS, "Freescale MX35PDK")
-	/* Maintainer: Freescale Semiconductor, Inc */
-	.atag_offset = 0x100,
-	.map_io = mx35_map_io,
-	.init_early = imx35_init_early,
-	.init_irq = mx35_init_irq,
-	.init_time	= mx35pdk_timer_init,
-	.init_machine = mx35_3ds_init,
-	.init_late	= mx35_3ds_late_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
deleted file mode 100644
index 017a50113005..000000000000
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ /dev/null
@@ -1,412 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *  Copyright (C) 2009 Sascha Hauer, Pengutronix
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/smc911x.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/property.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx35.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx35.h"
-#include "ulpi.h"
-
-static const struct fb_videomode fb_modedb[] = {
-	{
-		/* 240x320 @ 60 Hz */
-		.name		= "Sharp-LQ035Q7",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 185925,
-		.left_margin	= 9,
-		.right_margin	= 16,
-		.upper_margin	= 7,
-		.lower_margin	= 9,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* 240x320 @ 60 Hz */
-		.name		= "TX090",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 38255,
-		.left_margin	= 144,
-		.right_margin	= 0,
-		.upper_margin	= 7,
-		.lower_margin	= 40,
-		.hsync_len	= 96,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
-	.name		= "Sharp-LQ035Q7",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
-};
-
-static struct physmap_flash_data pcm043_flash_data = {
-	.width  = 2,
-};
-
-static struct resource pcm043_flash_resource = {
-	.start	= 0xa0000000,
-	.end	= 0xa1ffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device pcm043_flash = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &pcm043_flash_data,
-	},
-	.resource = &pcm043_flash_resource,
-	.num_resources = 1,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
-	.bitrate = 50000,
-};
-
-static const struct property_entry board_eeprom_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 32),
-	{ }
-};
-
-static struct i2c_board_info pcm043_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */
-		.properties = board_eeprom_properties,
-	}, {
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&pcm043_flash,
-};
-
-static const iomux_v3_cfg_t pcm043_pads[] __initconst = {
-	/* UART1 */
-	MX35_PAD_CTS1__UART1_CTS,
-	MX35_PAD_RTS1__UART1_RTS,
-	MX35_PAD_TXD1__UART1_TXD_MUX,
-	MX35_PAD_RXD1__UART1_RXD_MUX,
-	/* UART2 */
-	MX35_PAD_CTS2__UART2_CTS,
-	MX35_PAD_RTS2__UART2_RTS,
-	MX35_PAD_TXD2__UART2_TXD_MUX,
-	MX35_PAD_RXD2__UART2_RXD_MUX,
-	/* FEC */
-	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX35_PAD_FEC_COL__FEC_COL,
-	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX35_PAD_FEC_MDC__FEC_MDC,
-	MX35_PAD_FEC_MDIO__FEC_MDIO,
-	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-	MX35_PAD_FEC_CRS__FEC_CRS,
-	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-	/* I2C1 */
-	MX35_PAD_I2C1_CLK__I2C1_SCL,
-	MX35_PAD_I2C1_DAT__I2C1_SDA,
-	/* Display */
-	MX35_PAD_LD0__IPU_DISPB_DAT_0,
-	MX35_PAD_LD1__IPU_DISPB_DAT_1,
-	MX35_PAD_LD2__IPU_DISPB_DAT_2,
-	MX35_PAD_LD3__IPU_DISPB_DAT_3,
-	MX35_PAD_LD4__IPU_DISPB_DAT_4,
-	MX35_PAD_LD5__IPU_DISPB_DAT_5,
-	MX35_PAD_LD6__IPU_DISPB_DAT_6,
-	MX35_PAD_LD7__IPU_DISPB_DAT_7,
-	MX35_PAD_LD8__IPU_DISPB_DAT_8,
-	MX35_PAD_LD9__IPU_DISPB_DAT_9,
-	MX35_PAD_LD10__IPU_DISPB_DAT_10,
-	MX35_PAD_LD11__IPU_DISPB_DAT_11,
-	MX35_PAD_LD12__IPU_DISPB_DAT_12,
-	MX35_PAD_LD13__IPU_DISPB_DAT_13,
-	MX35_PAD_LD14__IPU_DISPB_DAT_14,
-	MX35_PAD_LD15__IPU_DISPB_DAT_15,
-	MX35_PAD_LD16__IPU_DISPB_DAT_16,
-	MX35_PAD_LD17__IPU_DISPB_DAT_17,
-	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
-	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
-	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
-	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
-	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
-	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
-	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
-	/* gpio */
-	MX35_PAD_ATA_CS0__GPIO2_6,
-	/* USB host */
-	MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
-	MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
-	/* SSI */
-	MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
-	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
-	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
-	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
-	/* CAN2 */
-	MX35_PAD_TX5_RX0__CAN2_TXCAN,
-	MX35_PAD_TX4_RX1__CAN2_RXCAN,
-	/* esdhc */
-	MX35_PAD_SD1_CMD__ESDHC1_CMD,
-	MX35_PAD_SD1_CLK__ESDHC1_CLK,
-	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
-	MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */
-	MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */
-};
-
-#define AC97_GPIO_TXFS	IMX_GPIO_NR(2, 31)
-#define AC97_GPIO_TXD	IMX_GPIO_NR(2, 28)
-#define AC97_GPIO_RESET	IMX_GPIO_NR(2, 0)
-
-static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
-{
-	iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
-	iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
-	int ret;
-
-	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
-	if (ret) {
-		printk("failed to get GPIO_TXFS: %d\n", ret);
-		return;
-	}
-
-	mxc_iomux_v3_setup_pad(txfs_gpio);
-
-	/* warm reset */
-	gpio_direction_output(AC97_GPIO_TXFS, 1);
-	udelay(2);
-	gpio_set_value(AC97_GPIO_TXFS, 0);
-
-	gpio_free(AC97_GPIO_TXFS);
-	mxc_iomux_v3_setup_pad(txfs);
-}
-
-static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
-{
-	iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
-	iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
-	iomux_v3_cfg_t txd_gpio = MX35_PAD_STXD4__GPIO2_28;
-	iomux_v3_cfg_t txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
-	iomux_v3_cfg_t reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
-	int ret;
-
-	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
-	if (ret)
-		goto err1;
-
-	ret = gpio_request(AC97_GPIO_TXD, "SSI");
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(AC97_GPIO_RESET, "SSI");
-	if (ret)
-		goto err3;
-
-	mxc_iomux_v3_setup_pad(txfs_gpio);
-	mxc_iomux_v3_setup_pad(txd_gpio);
-	mxc_iomux_v3_setup_pad(reset_gpio);
-
-	gpio_direction_output(AC97_GPIO_TXFS, 0);
-	gpio_direction_output(AC97_GPIO_TXD, 0);
-
-	/* cold reset */
-	gpio_direction_output(AC97_GPIO_RESET, 0);
-	udelay(10);
-	gpio_direction_output(AC97_GPIO_RESET, 1);
-
-	mxc_iomux_v3_setup_pad(txd);
-	mxc_iomux_v3_setup_pad(txfs);
-
-	gpio_free(AC97_GPIO_RESET);
-err3:
-	gpio_free(AC97_GPIO_TXD);
-err2:
-	gpio_free(AC97_GPIO_TXFS);
-err1:
-	if (ret)
-		printk("%s failed with %d\n", __func__, ret);
-	mdelay(1);
-}
-
-static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = {
-	.ac97_reset = pcm043_ac97_cold_reset,
-	.ac97_warm_reset = pcm043_ac97_warm_reset,
-	.flags = IMX_SSI_USE_AC97,
-};
-
-static const struct mxc_nand_platform_data
-pcm037_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static int pcm043_otg_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
-	.init	= pcm043_otg_init,
-	.portsc	= MXC_EHCI_MODE_UTMI,
-};
-
-static int pcm043_usbh1_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
-			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
-}
-
-static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
-	.init	= pcm043_usbh1_init,
-	.portsc	= MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_UTMI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init pcm043_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = true;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = false;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 1;
-}
-__setup("otg_mode=", pcm043_otg_mode);
-
-static struct esdhc_platform_data sd1_pdata = {
-	.wp_type = ESDHC_WP_GPIO,
-	.cd_type = ESDHC_CD_GPIO,
-};
-
-static struct gpiod_lookup_table sd1_gpio_table = {
-	.dev_id = "sdhci-esdhc-imx35.0",
-	.table = {
-		/* Card detect: bank 2 offset 24 */
-		GPIO_LOOKUP("imx35-gpio.2", 24, "cd", GPIO_ACTIVE_LOW),
-		/* Write protect: bank 2 offset 23 */
-		GPIO_LOOKUP("imx35-gpio.2", 23, "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/*
- * Board specific initialization.
- */
-static void __init pcm043_init(void)
-{
-	imx35_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
-
-	imx35_add_fec(NULL);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	imx35_add_imx2_wdt();
-
-	imx35_add_imx_uart0(&uart_pdata);
-	imx35_add_mxc_nand(&pcm037_nand_board_info);
-
-	imx35_add_imx_uart1(&uart_pdata);
-
-	i2c_register_board_info(0, pcm043_i2c_devices,
-			ARRAY_SIZE(pcm043_i2c_devices));
-
-	imx35_add_imx_i2c0(&pcm043_i2c0_data);
-
-	imx35_add_ipu_core();
-	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
-	if (otg_mode_host) {
-		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-				ULPI_OTG_DRVVBUS_EXT);
-		if (otg_pdata.otg)
-			imx35_add_mxc_ehci_otg(&otg_pdata);
-	}
-	imx35_add_mxc_ehci_hs(&usbh1_pdata);
-
-	if (!otg_mode_host)
-		imx35_add_fsl_usb2_udc(&otg_device_pdata);
-
-	imx35_add_flexcan1();
-}
-
-static void __init pcm043_late_init(void)
-{
-	imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
-
-	gpiod_add_lookup_table(&sd1_gpio_table);
-	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
-}
-
-static void __init pcm043_timer_init(void)
-{
-	mx35_clocks_init();
-}
-
-MACHINE_START(PCM043, "Phytec Phycore pcm043")
-	/* Maintainer: Pengutronix */
-	.atag_offset = 0x100,
-	.map_io = mx35_map_io,
-	.init_early = imx35_init_early,
-	.init_irq = mx35_init_irq,
-	.init_time = pcm043_timer_init,
-	.init_machine	= pcm043_init,
-	.init_late	= pcm043_late_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
deleted file mode 100644
index fae5a41b5f6c..000000000000
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ /dev/null
@@ -1,306 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
- * Copyright 2010 Creative Product Design
- *
- * Derived from mx35 3stack.
- * Original author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <linux/i2c.h>
-#include <linux/mfd/mc13xxx.h>
-
-#include "common.h"
-#include "devices-imx35.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx35.h"
-
-#define GPIO_LCDPWR	IMX_GPIO_NR(1, 2)
-#define GPIO_PMIC_INT	IMX_GPIO_NR(2, 0)
-
-#define GPIO_BUTTON1	IMX_GPIO_NR(1, 4)
-#define GPIO_BUTTON2	IMX_GPIO_NR(1, 5)
-#define GPIO_BUTTON3	IMX_GPIO_NR(1, 7)
-#define GPIO_BUTTON4	IMX_GPIO_NR(1, 8)
-#define GPIO_BUTTON5	IMX_GPIO_NR(1, 9)
-#define GPIO_BUTTON6	IMX_GPIO_NR(1, 10)
-#define GPIO_BUTTON7	IMX_GPIO_NR(1, 11)
-#define GPIO_BUTTON8	IMX_GPIO_NR(1, 12)
-
-static const struct fb_videomode fb_modedb[] = {
-	{
-		/* 800x480 @ 60 Hz */
-		.name		= "PT0708048",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= KHZ2PICOS(33260),
-		.left_margin	= 50,
-		.right_margin	= 156,
-		.upper_margin	= 10,
-		.lower_margin	= 10,
-		.hsync_len	= 1,	/* note: DE only display */
-		.vsync_len	= 1,	/* note: DE only display */
-		.sync		= FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* 800x480 @ 60 Hz */
-		.name		= "CTP-CLAA070LC0ACW",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= KHZ2PICOS(27000),
-		.left_margin	= 50,
-		.right_margin	= 50,	/* whole line should have 900 clocks */
-		.upper_margin	= 10,
-		.lower_margin	= 10,	/* whole frame should have 500 lines */
-		.hsync_len	= 1,	/* note: DE only display */
-		.vsync_len	= 1,	/* note: DE only display */
-		.sync		= FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
-	.name		= "PT0708048",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
-};
-
-static struct physmap_flash_data vpr200_flash_data = {
-	.width  = 2,
-};
-
-static struct resource vpr200_flash_resource = {
-	.start	= MX35_CS0_BASE_ADDR,
-	.end	= MX35_CS0_BASE_ADDR + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device vpr200_flash = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &vpr200_flash_data,
-	},
-	.resource = &vpr200_flash_resource,
-	.num_resources = 1,
-};
-
-static const struct mxc_nand_platform_data
-		vpr200_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-	.flash_bbt = 1,
-};
-
-#define VPR_KEY_DEBOUNCE	500
-static struct gpio_keys_button vpr200_gpio_keys_table[] = {
-	{KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE},
-	{KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE},
-	{KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE},
-	{KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE},
-	{KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE},
-	{KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE},
-	{KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE},
-	{KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
-};
-
-static const struct gpio_keys_platform_data
-		vpr200_gpio_keys_data __initconst = {
-	.buttons = vpr200_gpio_keys_table,
-	.nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
-};
-
-static struct mc13xxx_platform_data vpr200_pmic = {
-	.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
-};
-
-static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = {
-	.bitrate = 50000,
-};
-
-static struct i2c_board_info vpr200_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c02", 0x50), /* E0=0, E1=0, E2=0 */
-	}, {
-		I2C_BOARD_INFO("mc13892", 0x08),
-		.platform_data = &vpr200_pmic,
-		/* irq number is run-time assigned */
-	}
-};
-
-static const iomux_v3_cfg_t vpr200_pads[] __initconst = {
-	/* UART1 */
-	MX35_PAD_TXD1__UART1_TXD_MUX,
-	MX35_PAD_RXD1__UART1_RXD_MUX,
-	/* UART3 */
-	MX35_PAD_ATA_DATA10__UART3_RXD_MUX,
-	MX35_PAD_ATA_DATA11__UART3_TXD_MUX,
-	/* FEC */
-	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX35_PAD_FEC_COL__FEC_COL,
-	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX35_PAD_FEC_MDC__FEC_MDC,
-	MX35_PAD_FEC_MDIO__FEC_MDIO,
-	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-	MX35_PAD_FEC_CRS__FEC_CRS,
-	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-	/* Display */
-	MX35_PAD_LD0__IPU_DISPB_DAT_0,
-	MX35_PAD_LD1__IPU_DISPB_DAT_1,
-	MX35_PAD_LD2__IPU_DISPB_DAT_2,
-	MX35_PAD_LD3__IPU_DISPB_DAT_3,
-	MX35_PAD_LD4__IPU_DISPB_DAT_4,
-	MX35_PAD_LD5__IPU_DISPB_DAT_5,
-	MX35_PAD_LD6__IPU_DISPB_DAT_6,
-	MX35_PAD_LD7__IPU_DISPB_DAT_7,
-	MX35_PAD_LD8__IPU_DISPB_DAT_8,
-	MX35_PAD_LD9__IPU_DISPB_DAT_9,
-	MX35_PAD_LD10__IPU_DISPB_DAT_10,
-	MX35_PAD_LD11__IPU_DISPB_DAT_11,
-	MX35_PAD_LD12__IPU_DISPB_DAT_12,
-	MX35_PAD_LD13__IPU_DISPB_DAT_13,
-	MX35_PAD_LD14__IPU_DISPB_DAT_14,
-	MX35_PAD_LD15__IPU_DISPB_DAT_15,
-	MX35_PAD_LD16__IPU_DISPB_DAT_16,
-	MX35_PAD_LD17__IPU_DISPB_DAT_17,
-	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
-	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
-	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
-	/* LCD Enable */
-	MX35_PAD_D3_VSYNC__GPIO1_2,
-	/* USBOTG */
-	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
-	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
-	/* SDCARD */
-	MX35_PAD_SD1_CMD__ESDHC1_CMD,
-	MX35_PAD_SD1_CLK__ESDHC1_CLK,
-	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
-	/* PMIC */
-	MX35_PAD_GPIO2_0__GPIO2_0,
-	/* GPIO keys */
-	MX35_PAD_SCKR__GPIO1_4,
-	MX35_PAD_COMPARE__GPIO1_5,
-	MX35_PAD_SCKT__GPIO1_7,
-	MX35_PAD_FST__GPIO1_8,
-	MX35_PAD_HCKT__GPIO1_9,
-	MX35_PAD_TX5_RX0__GPIO1_10,
-	MX35_PAD_TX4_RX1__GPIO1_11,
-	MX35_PAD_TX3_RX2__GPIO1_12,
-};
-
-/* USB Device config */
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI,
-	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
-};
-
-static int vpr200_usbh_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id,
-			MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
-}
-
-/* USB HOST config */
-static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
-	.init = vpr200_usbh_init,
-	.portsc = MXC_EHCI_MODE_SERIAL,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&vpr200_flash,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init vpr200_board_init(void)
-{
-	imx35_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
-
-	imx35_add_fec(NULL);
-	imx35_add_imx2_wdt();
-
-	imx35_add_imx_uart0(NULL);
-	imx35_add_imx_uart2(NULL);
-
-	imx35_add_ipu_core();
-	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
-	imx35_add_fsl_usb2_udc(&otg_device_pdata);
-	imx35_add_mxc_ehci_hs(&usb_host_pdata);
-
-	imx35_add_mxc_nand(&vpr200_nand_board_info);
-	imx35_add_sdhci_esdhc_imx(0, NULL);
-}
-
-static void __init vpr200_late_init(void)
-{
-	imx_add_gpio_keys(&vpr200_gpio_keys_data);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR"))
-		printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n");
-	else
-		gpio_direction_output(GPIO_LCDPWR, 0);
-
-	if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT"))
-		printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n");
-	else
-		gpio_direction_input(GPIO_PMIC_INT);
-
-	vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT);
-	i2c_register_board_info(0, vpr200_i2c_devices,
-			ARRAY_SIZE(vpr200_i2c_devices));
-
-	imx35_add_imx_i2c0(&vpr200_i2c0_data);
-}
-
-static void __init vpr200_timer_init(void)
-{
-	mx35_clocks_init();
-}
-
-MACHINE_START(VPR200, "VPR200")
-	/* Maintainer: Creative Product Design */
-	.map_io = mx35_map_io,
-	.init_early = imx35_init_early,
-	.init_irq = mx35_init_irq,
-	.init_time = vpr200_timer_init,
-	.init_machine = vpr200_board_init,
-	.init_late	= vpr200_late_init,
-	.restart	= mxc_restart,
-MACHINE_END
-- 
2.11.0