From e8527b6eb6ffdccc45b58646312cfe42365b74b0 Mon Sep 17 00:00:00 2001 From: Lars Poeschel Date: Mon, 9 Oct 2017 14:03:00 +0200 Subject: [PATCH] dt-bindings: pinctrl: mcp23s08 update binding doc The mcp23s08 driver moved to pinctrl recently. It accepts the bias-pull-up pinctrl property since then. This updates the binding doc to reflect that. Thanks to Sebastian Reichel for the working example. Signed-off-by: Lars Poeschel Signed-off-by: Linus Walleij --- .../bindings/pinctrl/pinctrl-mcp23s08.txt | 58 ++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt index c934106b10aa..b7a0e868ec13 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt @@ -81,3 +81,61 @@ gpiom1: gpio@0 { reg = <0>; spi-max-frequency = <1000000>; }; + +Pull-up configuration +===================== + +If pins are used as output, they can also be configured with pull-ups. This is +done with pinctrl. + +Please refer file +for details of the common pinctrl bindings used by client devices, +including the meaning of the phrase "pin configuration node". + +Optional Pinmux properties: +-------------------------- +Following properties are required if default setting of pins are required +at boot. +- pinctrl-names: A pinctrl state named per . +- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per + . + +The pin configurations are defined as child of the pinctrl states node. Each +sub-node have following properties: + +Required properties: +------------------ +- pins: List of pins. Valid values of pins properties are: + gpio0 ... gpio7 for the devices with 8 GPIO pins and + gpio0 ... gpio15 for the devices with 16 GPIO pins. + +Optional properties: +------------------- +The following optional property is defined in the pinmux DT binding document +. Absence of this property will leave the configuration +in its default state. + bias-pull-up + +Example with pinctrl to pull-up output pins: +gpio21: gpio@21 { + compatible = "microchip,mcp23017"; + gpio-controller; + #gpio-cells = <0x2>; + reg = <0x21>; + interrupt-parent = <&socgpio>; + interrupts = <0x17 0x8>; + interrupt-names = "mcp23017@21 irq"; + interrupt-controller; + #interrupt-cells = <0x2>; + microchip,irq-mirror; + pinctrl-names = "default"; + pinctrl-0 = <&i2cgpio0irq &gpio21pullups>; + + gpio21pullups: pinmux { + pins = "gpio0", "gpio1", "gpio2", "gpio3", + "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", "gpio15"; + bias-pull-up; + }; +}; -- 2.11.0