From e85ec74ace29acfda4afdfd56df122a0a62e6a1a Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 19 Sep 2017 10:46:46 -0700 Subject: [PATCH] net: dsa: bcm_sf2: Defer port enabling to calling port_enable There is no need to configure the enabled ports once in bcm_sf2_sw_setup() and then a second time around when dsa_switch_ops::port_enable is called, just do it when port_enable is called which is better in terms of power consumption and correctness. Reviewed-by: Vivien Didelot Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index d7b53d53c116..8acbd17bc1fd 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -890,14 +890,11 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds) struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); unsigned int port; - /* Enable all valid ports and disable those unused */ + /* Disable unused ports and configure IMP port */ for (port = 0; port < priv->hw_params.num_ports; port++) { - /* IMP port receives special treatment */ - if ((1 << port) & ds->enabled_port_mask) - bcm_sf2_port_setup(ds, port, NULL); - else if (dsa_is_cpu_port(ds, port)) + if (dsa_is_cpu_port(ds, port)) bcm_sf2_imp_setup(ds, port); - else + else if (!((1 << port) & ds->enabled_port_mask)) bcm_sf2_port_disable(ds, port, NULL); } -- 2.11.0