From ef3f08c83fd186ab4bbad6a6250c5a347fbf6551 Mon Sep 17 00:00:00 2001 From: Kazuya Mizuguchi Date: Wed, 1 Feb 2017 09:42:04 +0100 Subject: [PATCH] arm64: dts: r8a7796: salvator-x: Fix EthernetAVB PHY timing Set PHY rxc-skew-ps to 1500 and all other values to their default values. This is intended to to address failures in the case of 1Gbps communication using the by salvator-x board with the KSZ9031RNX phy. This has been reported to occur with both the r8a7795 (H3) and r8a7796 (M3-W) SoCs. Signed-off-by: Kazuya Mizuguchi Signed-off-by: Takeshi Kihara Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index 61f4662db497..93ed23ab71bb 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -172,18 +172,7 @@ status = "okay"; phy0: ethernet-phy@0 { - rxc-skew-ps = <900>; - rxdv-skew-ps = <0>; - rxd0-skew-ps = <0>; - rxd1-skew-ps = <0>; - rxd2-skew-ps = <0>; - rxd3-skew-ps = <0>; - txc-skew-ps = <900>; - txen-skew-ps = <0>; - txd0-skew-ps = <0>; - txd1-skew-ps = <0>; - txd2-skew-ps = <0>; - txd3-skew-ps = <0>; + rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; -- 2.11.0