From f0889638456b2da341f35f3c841adfe4bdb88e5c Mon Sep 17 00:00:00 2001 From: "Tobin C. Harding" Date: Wed, 22 Feb 2017 17:12:36 +1100 Subject: [PATCH] cciss: Fix checkpatch TRAILING_WHITESPACE Checkpatch emits 85 trailing whitespace warnings. Remove trailing whitespace. Signed-off-by: Tobin C. Harding Acked-by: Don Brace Signed-off-by: Jens Axboe --- drivers/block/cciss_scsi.c | 170 ++++++++++++++++++++++----------------------- 1 file changed, 85 insertions(+), 85 deletions(-) diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index a18de9d727b0..2b8cfd4c81ce 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -17,15 +17,15 @@ * 02111-1307, USA. * * Questions/Comments/Bugfixes to iss_storagedev@hp.com - * + * * Author: Stephen M. Cameron */ #ifdef CONFIG_CISS_SCSI_TAPE -/* Here we have code to present the driver as a scsi driver - as it is simultaneously presented as a block driver. The +/* Here we have code to present the driver as a scsi driver + as it is simultaneously presented as a block driver. The reason for doing this is to allow access to SCSI tape drives - through the array controller. Note in particular, neither + through the array controller. Note in particular, neither physical nor logical disks are presented through the scsi layer. */ #include @@ -37,7 +37,7 @@ #include #include -#include +#include #include "cciss_scsi.h" @@ -120,7 +120,7 @@ struct cciss_scsi_adapter_data_t { struct cciss_scsi_cmd_stack_t cmd_stack; SGDescriptor_struct **cmd_sg_list; int registered; - spinlock_t lock; // to protect ccissscsi[ctlr]; + spinlock_t lock; // to protect ccissscsi[ctlr]; }; #define CPQ_TAPE_LOCK(h, flags) spin_lock_irqsave( \ @@ -143,36 +143,36 @@ scsi_cmd_alloc(ctlr_info_t *h) u64bit temp64; sa = h->scsi_ctlr; - stk = &sa->cmd_stack; + stk = &sa->cmd_stack; - if (stk->top < 0) + if (stk->top < 0) return NULL; - c = stk->elem[stk->top]; + c = stk->elem[stk->top]; /* memset(c, 0, sizeof(*c)); */ memset(&c->cmd, 0, sizeof(c->cmd)); memset(&c->Err, 0, sizeof(c->Err)); /* set physical addr of cmd and addr of scsi parameters */ - c->cmd.busaddr = c->busaddr; + c->cmd.busaddr = c->busaddr; c->cmd.cmdindex = c->cmdindex; - /* (__u32) (stk->cmd_pool_handle + + /* (__u32) (stk->cmd_pool_handle + (sizeof(struct cciss_scsi_cmd_stack_elem_t)*stk->top)); */ temp64.val = (__u64) (c->busaddr + sizeof(CommandList_struct)); - /* (__u64) (stk->cmd_pool_handle + + /* (__u64) (stk->cmd_pool_handle + (sizeof(struct cciss_scsi_cmd_stack_elem_t)*stk->top) + sizeof(CommandList_struct)); */ stk->top--; c->cmd.ErrDesc.Addr.lower = temp64.val32.lower; c->cmd.ErrDesc.Addr.upper = temp64.val32.upper; c->cmd.ErrDesc.Len = sizeof(ErrorInfo_struct); - + c->cmd.ctlr = h->ctlr; c->cmd.err_info = &c->Err; return (CommandList_struct *) c; } -static void +static void scsi_cmd_free(ctlr_info_t *h, CommandList_struct *c) { /* assume only one process in here at a time, locking done by caller. */ @@ -183,7 +183,7 @@ scsi_cmd_free(ctlr_info_t *h, CommandList_struct *c) struct cciss_scsi_cmd_stack_t *stk; sa = h->scsi_ctlr; - stk = &sa->cmd_stack; + stk = &sa->cmd_stack; stk->top++; if (stk->top >= stk->nelems) { dev_err(&h->pdev->dev, @@ -228,7 +228,7 @@ scsi_cmd_stack_setup(ctlr_info_t *h, struct cciss_scsi_adapter_data_t *sa) } for (i = 0; i < stk->nelems; i++) { stk->elem[i] = &stk->pool[i]; - stk->elem[i]->busaddr = (__u32) (stk->cmd_pool_handle + + stk->elem[i]->busaddr = (__u32) (stk->cmd_pool_handle + (sizeof(struct cciss_scsi_cmd_stack_elem_t) * i)); stk->elem[i]->cmdindex = i; } @@ -244,7 +244,7 @@ scsi_cmd_stack_free(ctlr_info_t *h) size_t size; sa = h->scsi_ctlr; - stk = &sa->cmd_stack; + stk = &sa->cmd_stack; if (stk->top != stk->nelems-1) { dev_warn(&h->pdev->dev, "bug: %d scsi commands are still outstanding.\n", @@ -266,7 +266,7 @@ print_cmd(CommandList_struct *cp) printk("queue:%d\n", cp->Header.ReplyQueue); printk("sglist:%d\n", cp->Header.SGList); printk("sgtot:%d\n", cp->Header.SGTotal); - printk("Tag:0x%08x/0x%08x\n", cp->Header.Tag.upper, + printk("Tag:0x%08x/0x%08x\n", cp->Header.Tag.upper, cp->Header.Tag.lower); printk("LUN:0x%8phN\n", cp->Header.LUN.LunAddrBytes); printk("CDBLen:%d\n", cp->Request.CDBLen); @@ -275,8 +275,8 @@ print_cmd(CommandList_struct *cp) printk(" Dir:%d\n",cp->Request.Type.Direction); printk("Timeout:%d\n",cp->Request.Timeout); printk("CDB: %16ph\n", cp->Request.CDB); - printk("edesc.Addr: 0x%08x/0%08x, Len = %d\n", - cp->ErrDesc.Addr.upper, cp->ErrDesc.Addr.lower, + printk("edesc.Addr: 0x%08x/0%08x, Len = %d\n", + cp->ErrDesc.Addr.upper, cp->ErrDesc.Addr.lower, cp->ErrDesc.Len); printk("sgs..........Errorinfo:\n"); printk("scsistatus:%d\n", cp->err_info->ScsiStatus); @@ -289,7 +289,7 @@ print_cmd(CommandList_struct *cp) } #endif -static int +static int find_bus_target_lun(ctlr_info_t *h, int *bus, int *target, int *lun) { /* finds an unused bus, target, lun for a new device */ @@ -299,24 +299,24 @@ find_bus_target_lun(ctlr_info_t *h, int *bus, int *target, int *lun) memset(&target_taken[0], 0, CCISS_MAX_SCSI_DEVS_PER_HBA); - target_taken[SELF_SCSI_ID] = 1; + target_taken[SELF_SCSI_ID] = 1; for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) target_taken[ccissscsi[h->ctlr].dev[i].target] = 1; - + for (i = 0; i < CCISS_MAX_SCSI_DEVS_PER_HBA; i++) { if (!target_taken[i]) { *bus = 0; *target=i; *lun = 0; found=1; break; } } - return (!found); + return (!found); } struct scsi2map { char scsi3addr[8]; int bus, target, lun; }; -static int +static int cciss_scsi_add_entry(ctlr_info_t *h, int hostno, struct cciss_scsi_dev_t *device, struct scsi2map *added, int *nadded) @@ -381,8 +381,8 @@ cciss_scsi_add_entry(ctlr_info_t *h, int hostno, ccissscsi[h->ctlr].ndevices++; - /* initially, (before registering with scsi layer) we don't - know our hostno and we don't want to print anything first + /* initially, (before registering with scsi layer) we don't + know our hostno and we don't want to print anything first time anyway (the scsi layer's inquiries will show that info) */ if (hostno != -1) dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n", @@ -467,7 +467,7 @@ adjust_cciss_scsi_table(ctlr_info_t *h, int hostno, /* sd contains scsi3 addresses and devtypes, but bus target and lun are not filled in. This funciton takes what's in sd to be the current and adjusts - ccissscsi[] to be in line with what's in sd. */ + ccissscsi[] to be in line with what's in sd. */ int i,j, found, changes=0; struct cciss_scsi_dev_t *csd; @@ -492,7 +492,7 @@ adjust_cciss_scsi_table(ctlr_info_t *h, int hostno, if (hostno != -1) /* if it's not the first time... */ sh = h->scsi_ctlr->scsi_host; - /* find any devices in ccissscsi[] that are not in + /* find any devices in ccissscsi[] that are not in sd[] and remove them from ccissscsi[] */ i = 0; @@ -512,7 +512,7 @@ adjust_cciss_scsi_table(ctlr_info_t *h, int hostno, } } - if (found == 0) { /* device no longer present. */ + if (found == 0) { /* device no longer present. */ changes++; cciss_scsi_remove_entry(h, hostno, i, removed, &nremoved); @@ -641,14 +641,14 @@ lookup_scsi3addr(ctlr_info_t *h, int bus, int target, int lun, char *scsi3addr) return -1; } -static void +static void cciss_scsi_setup(ctlr_info_t *h) { struct cciss_scsi_adapter_data_t * shba; ccissscsi[h->ctlr].ndevices = 0; shba = (struct cciss_scsi_adapter_data_t *) - kmalloc(sizeof(*shba), GFP_KERNEL); + kmalloc(sizeof(*shba), GFP_KERNEL); if (shba == NULL) return; shba->scsi_host = NULL; @@ -693,20 +693,20 @@ static void complete_scsi_command(CommandList_struct *c, int timeout, /* copy the sense data whether we need to or not. */ - memcpy(cmd->sense_buffer, ei->SenseInfo, + memcpy(cmd->sense_buffer, ei->SenseInfo, ei->SenseLen > SCSI_SENSE_BUFFERSIZE ? - SCSI_SENSE_BUFFERSIZE : + SCSI_SENSE_BUFFERSIZE : ei->SenseLen); scsi_set_resid(cmd, ei->ResidualCnt); - if(ei->CommandStatus != 0) - { /* an error has occurred */ + if(ei->CommandStatus != 0) + { /* an error has occurred */ switch(ei->CommandStatus) { case CMD_TARGET_STATUS: /* Pass it up to the upper layers... */ if (!ei->ScsiStatus) { - + /* Ordinarily, this case should never happen, but there is a bug in some released firmware revisions that allows it to happen if, for example, a 4100 backplane loses power and the tape @@ -731,7 +731,7 @@ static void complete_scsi_command(CommandList_struct *c, int timeout, print_cmd(c); */ /* We get CMD_INVALID if you address a non-existent tape drive instead - of a selection timeout (no response). You will see this if you yank + of a selection timeout (no response). You will see this if you yank out a tape drive, then try to access it. This is kind of a shame because it means that any other CMD_INVALID (e.g. driver bug) will get interpreted as a missing target. */ @@ -780,7 +780,7 @@ static void complete_scsi_command(CommandList_struct *c, int timeout, cmd->result = DID_ERROR << 16; dev_warn(&h->pdev->dev, "%p returned unknown status %x\n", c, - ei->CommandStatus); + ei->CommandStatus); } } cmd->scsi_done(cmd); @@ -796,15 +796,15 @@ cciss_scsi_detect(ctlr_info_t *h) sh = scsi_host_alloc(&cciss_driver_template, sizeof(struct ctlr_info *)); if (sh == NULL) goto fail; - sh->io_port = 0; // good enough? FIXME, + sh->io_port = 0; // good enough? FIXME, sh->n_io_port = 0; // I don't think we use these two... - sh->this_id = SELF_SCSI_ID; + sh->this_id = SELF_SCSI_ID; sh->can_queue = cciss_tape_cmds; sh->sg_tablesize = h->maxsgentries; sh->max_cmd_len = MAX_COMMAND_SIZE; sh->max_sectors = h->cciss_max_sectors; - ((struct cciss_scsi_adapter_data_t *) + ((struct cciss_scsi_adapter_data_t *) h->scsi_ctlr)->scsi_host = sh; sh->hostdata[0] = (unsigned long) h; sh->irq = h->intr[SIMPLE_MODE_INT]; @@ -856,7 +856,7 @@ cciss_map_one(struct pci_dev *pdev, static int cciss_scsi_do_simple_cmd(ctlr_info_t *h, CommandList_struct *c, - unsigned char *scsi3addr, + unsigned char *scsi3addr, unsigned char *cdb, unsigned char cdblen, unsigned char *buf, int bufsize, @@ -871,7 +871,7 @@ cciss_scsi_do_simple_cmd(ctlr_info_t *h, c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */ // Fill in the request block... - /* printk("Using scsi3addr 0x%02x%0x2%0x2%0x2%0x2%0x2%0x2%0x2\n", + /* printk("Using scsi3addr 0x%02x%0x2%0x2%0x2%0x2%0x2%0x2%0x2\n", scsi3addr[0], scsi3addr[1], scsi3addr[2], scsi3addr[3], scsi3addr[4], scsi3addr[5], scsi3addr[6], scsi3addr[7]); */ @@ -885,7 +885,7 @@ cciss_scsi_do_simple_cmd(ctlr_info_t *h, /* Fill in the SG list and do dma mapping */ cciss_map_one(h->pdev, c, (unsigned char *) buf, - bufsize, DMA_FROM_DEVICE); + bufsize, DMA_FROM_DEVICE); c->waiting = &wait; enqueue_cmd_and_start_io(h, c); @@ -896,7 +896,7 @@ cciss_scsi_do_simple_cmd(ctlr_info_t *h, return(0); } -static void +static void cciss_scsi_interpret_error(ctlr_info_t *h, CommandList_struct *c) { ErrorInfo_struct *ei; @@ -1005,7 +1005,7 @@ cciss_scsi_do_inquiry(ctlr_info_t *h, unsigned char *scsi3addr, if (rc != 0) return rc; /* something went wrong */ - if (ei->CommandStatus != 0 && + if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { cciss_scsi_interpret_error(h, c); rc = -1; @@ -1013,7 +1013,7 @@ cciss_scsi_do_inquiry(ctlr_info_t *h, unsigned char *scsi3addr, spin_lock_irqsave(&h->lock, flags); scsi_cmd_free(h, c); spin_unlock_irqrestore(&h->lock, flags); - return rc; + return rc; } /* Get the device id from inquiry page 0x83 */ @@ -1042,7 +1042,7 @@ cciss_scsi_do_report_phys_luns(ctlr_info_t *h, int rc; CommandList_struct *c; unsigned char cdb[12]; - unsigned char scsi3addr[8]; + unsigned char scsi3addr[8]; ErrorInfo_struct *ei; unsigned long flags; @@ -1069,14 +1069,14 @@ cciss_scsi_do_report_phys_luns(ctlr_info_t *h, cdb[11] = 0; rc = cciss_scsi_do_simple_cmd(h, c, scsi3addr, - cdb, 12, - (unsigned char *) buf, + cdb, 12, + (unsigned char *) buf, bufsize, XFER_READ); if (rc != 0) return rc; /* something went wrong */ ei = c->err_info; - if (ei->CommandStatus != 0 && + if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { cciss_scsi_interpret_error(h, c); rc = -1; @@ -1084,36 +1084,36 @@ cciss_scsi_do_report_phys_luns(ctlr_info_t *h, spin_lock_irqsave(&h->lock, flags); scsi_cmd_free(h, c); spin_unlock_irqrestore(&h->lock, flags); - return rc; + return rc; } static void cciss_update_non_disk_devices(ctlr_info_t *h, int hostno) { /* the idea here is we could get notified from /proc - that some devices have changed, so we do a report - physical luns cmd, and adjust our list of devices + that some devices have changed, so we do a report + physical luns cmd, and adjust our list of devices accordingly. (We can't rely on the scsi-mid layer just - doing inquiries, because the "busses" that the scsi + doing inquiries, because the "busses" that the scsi mid-layer probes are totally fabricated by this driver, so new devices wouldn't show up. - the scsi3addr's of devices won't change so long as the - adapter is not reset. That means we can rescan and - tell which devices we already know about, vs. new + the scsi3addr's of devices won't change so long as the + adapter is not reset. That means we can rescan and + tell which devices we already know about, vs. new devices, vs. disappearing devices. Also, if you yank out a tape drive, then put in a disk - in it's place, (say, a configured volume from another - array controller for instance) _don't_ poke this driver - (so it thinks it's still a tape, but _do_ poke the scsi - mid layer, so it does an inquiry... the scsi mid layer + in it's place, (say, a configured volume from another + array controller for instance) _don't_ poke this driver + (so it thinks it's still a tape, but _do_ poke the scsi + mid layer, so it does an inquiry... the scsi mid layer will see the physical disk. This would be bad. Need to - think about how to prevent that. One idea would be to + think about how to prevent that. One idea would be to snoop all scsi responses and if an inquiry repsonse comes back that reports a disk, chuck it an return selection timeout instead and adjust our table... Not sure i like - that though. + that though. */ #define OBDR_TAPE_INQ_SIZE 49 @@ -1141,9 +1141,9 @@ cciss_update_non_disk_devices(ctlr_info_t *h, int hostno) ch = &ld_buff->LUNListLength[0]; num_luns = ((ch[0]<<24) | (ch[1]<<16) | (ch[2]<<8) | ch[3]) / 8; if (num_luns > CISS_MAX_PHYS_LUN) { - printk(KERN_WARNING + printk(KERN_WARNING "cciss: Maximum physical LUNs (%d) exceeded. " - "%d LUNs ignored.\n", CISS_MAX_PHYS_LUN, + "%d LUNs ignored.\n", CISS_MAX_PHYS_LUN, num_luns - CISS_MAX_PHYS_LUN); num_luns = CISS_MAX_PHYS_LUN; } @@ -1154,7 +1154,7 @@ cciss_update_non_disk_devices(ctlr_info_t *h, int hostno) } - /* adjust our table of devices */ + /* adjust our table of devices */ for (i = 0; i < num_luns; i++) { /* for each physical lun, do an inquiry */ if (ld_buff->LUN[i][3] & 0xC0) continue; @@ -1213,7 +1213,7 @@ cciss_update_non_disk_devices(ctlr_info_t *h, int hostno) currentsd[ncurrent] = *this_device; ncurrent++; break; - default: + default: break; } } @@ -1258,8 +1258,8 @@ cciss_scsi_write_info(struct Scsi_Host *sh, return -EINVAL; return cciss_scsi_user_command(h, sh->host_no, - buffer, length); -} + buffer, length); +} static int cciss_scsi_show_info(struct seq_file *m, struct Scsi_Host *sh) @@ -1297,8 +1297,8 @@ cciss_scsi_show_info(struct seq_file *m, struct Scsi_Host *sh) return 0; } -/* cciss_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci - dma mapping and fills in the scatter gather entries of the +/* cciss_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci + dma mapping and fills in the scatter gather entries of the cciss command, c. */ static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *c, @@ -1394,7 +1394,7 @@ cciss_scsi_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmn // Fill in the command list header - cmd->scsi_done = done; // save this for use by completion code + cmd->scsi_done = done; // save this for use by completion code /* save c in case we have to abort it */ cmd->host_scribble = (unsigned char *) c; @@ -1404,7 +1404,7 @@ cciss_scsi_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmn c->Header.ReplyQueue = 0; /* unused in simple mode */ memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8); c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */ - + // Fill in the request block... c->Request.Timeout = 0; @@ -1432,15 +1432,15 @@ cciss_scsi_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmn c->Request.Type.Direction = XFER_RSVD; // This is technically wrong, and cciss controllers should - // reject it with CMD_INVALID, which is the most correct - // response, but non-fibre backends appear to let it + // reject it with CMD_INVALID, which is the most correct + // response, but non-fibre backends appear to let it // slide by, and give the same results as if this field // were set correctly. Either way is acceptable for // our purposes here. break; - default: + default: dev_warn(&h->pdev->dev, "unknown data direction: %d\n", cmd->sc_data_direction); BUG(); @@ -1464,9 +1464,9 @@ static void cciss_unregister_scsi(ctlr_info_t *h) spin_lock_irqsave(&h->lock, flags); sa = h->scsi_ctlr; - stk = &sa->cmd_stack; + stk = &sa->cmd_stack; - /* if we weren't ever actually registered, don't unregister */ + /* if we weren't ever actually registered, don't unregister */ if (sa->registered) { spin_unlock_irqrestore(&h->lock, flags); scsi_remove_host(sa->scsi_host); @@ -1474,7 +1474,7 @@ static void cciss_unregister_scsi(ctlr_info_t *h) spin_lock_irqsave(&h->lock, flags); } - /* set scsi_host to NULL so our detect routine will + /* set scsi_host to NULL so our detect routine will find us on register */ sa->scsi_host = NULL; spin_unlock_irqrestore(&h->lock, flags); @@ -1490,7 +1490,7 @@ static int cciss_engage_scsi(ctlr_info_t *h) spin_lock_irqsave(&h->lock, flags); sa = h->scsi_ctlr; - stk = &sa->cmd_stack; + stk = &sa->cmd_stack; if (sa->registered) { dev_info(&h->pdev->dev, "SCSI subsystem already engaged.\n"); @@ -1586,13 +1586,13 @@ retry_tur: return rc; } -/* Need at least one of these error handlers to keep ../scsi/hosts.c from - * complaining. Doing a host- or bus-reset can't do anything good here. +/* Need at least one of these error handlers to keep ../scsi/hosts.c from + * complaining. Doing a host- or bus-reset can't do anything good here. * Despite what it might say in scsi_error.c, there may well be commands * on the controller, as the cciss driver registers twice, once as a block * device for the logical drives, and once as a scsi device, for any tape * drives. So we know there are no commands out on the tape drives, but we - * don't know there are no commands on the controller, and it is likely + * don't know there are no commands on the controller, and it is likely * that there probably are, as the cciss block device is most commonly used * as a boot device (embedded controller on HP/Compaq systems.) */ -- 2.11.0