From f0ff353a863f61c5cd1899312e7adaa776e80a92 Mon Sep 17 00:00:00 2001 From: Mark Rustad Date: Tue, 22 Jul 2014 06:50:58 +0000 Subject: [PATCH] ixgbe: Delete a bunch of dead code All of the code involved with returning the supported physical layer is actually unused, so delete it. Signed-off-by: Mark Rustad Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c | 101 -------------------- drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 127 ------------------------- drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 20 ---- drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c | 27 ------ 4 files changed, 275 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c index 206171f732fb..681e3205038d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c @@ -1109,106 +1109,6 @@ static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset, } /** - * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type - * @hw: pointer to hardware structure - * - * Determines physical layer capabilities of the current configuration. - **/ -static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) -{ - u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; - u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); - u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; - u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; - u16 ext_ability = 0; - - hw->phy.ops.identify(hw); - - /* Copper PHY must be checked before AUTOC LMS to determine correct - * physical layer because 10GBase-T PHYs use LMS = KX4/KX */ - switch (hw->phy.type) { - case ixgbe_phy_tn: - case ixgbe_phy_cu_unknown: - hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, - MDIO_MMD_PMAPMD, &ext_ability); - if (ext_ability & MDIO_PMA_EXTABLE_10GBT) - physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; - if (ext_ability & MDIO_PMA_EXTABLE_1000BT) - physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; - if (ext_ability & MDIO_PMA_EXTABLE_100BTX) - physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; - goto out; - default: - break; - } - - switch (autoc & IXGBE_AUTOC_LMS_MASK) { - case IXGBE_AUTOC_LMS_1G_AN: - case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: - if (pma_pmd_1g == IXGBE_AUTOC_1G_KX) - physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX; - else - physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX; - break; - case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: - if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; - else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; - else /* XAUI */ - physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; - break; - case IXGBE_AUTOC_LMS_KX4_AN: - case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: - if (autoc & IXGBE_AUTOC_KX_SUPP) - physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; - if (autoc & IXGBE_AUTOC_KX4_SUPP) - physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; - break; - default: - break; - } - - if (hw->phy.type == ixgbe_phy_nl) { - hw->phy.ops.identify_sfp(hw); - - switch (hw->phy.sfp_type) { - case ixgbe_sfp_type_da_cu: - physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; - break; - case ixgbe_sfp_type_sr: - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; - break; - case ixgbe_sfp_type_lr: - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; - break; - default: - physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; - break; - } - } - - switch (hw->device_id) { - case IXGBE_DEV_ID_82598_DA_DUAL_PORT: - physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; - break; - case IXGBE_DEV_ID_82598AF_DUAL_PORT: - case IXGBE_DEV_ID_82598AF_SINGLE_PORT: - case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; - break; - case IXGBE_DEV_ID_82598EB_XF_LR: - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; - break; - default: - break; - } - -out: - return physical_layer; -} - -/** * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple * port devices. * @hw: pointer to the HW structure @@ -1285,7 +1185,6 @@ static struct ixgbe_mac_operations mac_ops_82598 = { .start_hw = &ixgbe_start_hw_82598, .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, .get_media_type = &ixgbe_get_media_type_82598, - .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598, .enable_rx_dma = &ixgbe_enable_rx_dma_generic, .get_mac_addr = &ixgbe_get_mac_addr_generic, .stop_adapter = &ixgbe_stop_adapter_generic, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index 0373a5b9219f..6fc633a2726a 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -1980,132 +1980,6 @@ out: } /** - * ixgbe_get_supported_physical_layer_82599 - Returns physical layer type - * @hw: pointer to hardware structure - * - * Determines physical layer capabilities of the current configuration. - **/ -static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) -{ - u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; - u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); - u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); - u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; - u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; - u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; - u16 ext_ability = 0; - u8 comp_codes_10g = 0; - u8 comp_codes_1g = 0; - - hw->phy.ops.identify(hw); - - switch (hw->phy.type) { - case ixgbe_phy_tn: - case ixgbe_phy_cu_unknown: - hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD, - &ext_ability); - if (ext_ability & MDIO_PMA_EXTABLE_10GBT) - physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; - if (ext_ability & MDIO_PMA_EXTABLE_1000BT) - physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; - if (ext_ability & MDIO_PMA_EXTABLE_100BTX) - physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; - goto out; - default: - break; - } - - switch (autoc & IXGBE_AUTOC_LMS_MASK) { - case IXGBE_AUTOC_LMS_1G_AN: - case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: - if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) { - physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX | - IXGBE_PHYSICAL_LAYER_1000BASE_BX; - goto out; - } else - /* SFI mode so read SFP module */ - goto sfp_check; - break; - case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: - if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; - else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; - else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI; - goto out; - case IXGBE_AUTOC_LMS_10G_SERIAL: - if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) { - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR; - goto out; - } else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) - goto sfp_check; - break; - case IXGBE_AUTOC_LMS_KX4_KX_KR: - case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: - if (autoc & IXGBE_AUTOC_KX_SUPP) - physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; - if (autoc & IXGBE_AUTOC_KX4_SUPP) - physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; - if (autoc & IXGBE_AUTOC_KR_SUPP) - physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR; - goto out; - default: - goto out; - } - -sfp_check: - /* SFP check must be done last since DA modules are sometimes used to - * test KR mode - we need to id KR mode correctly before SFP module. - * Call identify_sfp because the pluggable module may have changed */ - hw->phy.ops.identify_sfp(hw); - if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) - goto out; - - switch (hw->phy.type) { - case ixgbe_phy_sfp_passive_tyco: - case ixgbe_phy_sfp_passive_unknown: - case ixgbe_phy_qsfp_passive_unknown: - physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; - break; - case ixgbe_phy_sfp_ftl_active: - case ixgbe_phy_sfp_active_unknown: - case ixgbe_phy_qsfp_active_unknown: - physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA; - break; - case ixgbe_phy_sfp_avago: - case ixgbe_phy_sfp_ftl: - case ixgbe_phy_sfp_intel: - case ixgbe_phy_sfp_unknown: - hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g); - hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g); - if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; - else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; - else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) - physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T; - break; - case ixgbe_phy_qsfp_intel: - case ixgbe_phy_qsfp_unknown: - hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_QSFP_10GBE_COMP, &comp_codes_10g); - if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; - else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; - break; - default: - break; - } - -out: - return physical_layer; -} - -/** * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599 * @hw: pointer to hardware structure * @regval: register value to write to RXCTRL @@ -2454,7 +2328,6 @@ static struct ixgbe_mac_operations mac_ops_82599 = { .start_hw = &ixgbe_start_hw_82599, .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, .get_media_type = &ixgbe_get_media_type_82599, - .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599, .enable_rx_dma = &ixgbe_enable_rx_dma_82599, .disable_rx_buff = &ixgbe_disable_rx_buff_generic, .enable_rx_buff = &ixgbe_enable_rx_buff_generic, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 9a89f98b35f0..e6b07c2a01fe 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -2440,25 +2440,6 @@ typedef u32 ixgbe_link_speed; IXGBE_LINK_SPEED_1GB_FULL | \ IXGBE_LINK_SPEED_10GB_FULL) - -/* Physical layer type */ -typedef u32 ixgbe_physical_layer; -#define IXGBE_PHYSICAL_LAYER_UNKNOWN 0 -#define IXGBE_PHYSICAL_LAYER_10GBASE_T 0x0001 -#define IXGBE_PHYSICAL_LAYER_1000BASE_T 0x0002 -#define IXGBE_PHYSICAL_LAYER_100BASE_TX 0x0004 -#define IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU 0x0008 -#define IXGBE_PHYSICAL_LAYER_10GBASE_LR 0x0010 -#define IXGBE_PHYSICAL_LAYER_10GBASE_LRM 0x0020 -#define IXGBE_PHYSICAL_LAYER_10GBASE_SR 0x0040 -#define IXGBE_PHYSICAL_LAYER_10GBASE_KX4 0x0080 -#define IXGBE_PHYSICAL_LAYER_10GBASE_CX4 0x0100 -#define IXGBE_PHYSICAL_LAYER_1000BASE_KX 0x0200 -#define IXGBE_PHYSICAL_LAYER_1000BASE_BX 0x0400 -#define IXGBE_PHYSICAL_LAYER_10GBASE_KR 0x0800 -#define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI 0x1000 -#define IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA 0x2000 - /* Flow Control Data Sheet defined values * Calculation and defines taken from 802.1bb Annex O */ @@ -2860,7 +2841,6 @@ struct ixgbe_mac_operations { s32 (*start_hw)(struct ixgbe_hw *); s32 (*clear_hw_cntrs)(struct ixgbe_hw *); enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *); - u32 (*get_supported_physical_layer)(struct ixgbe_hw *); s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *); s32 (*get_san_mac_addr)(struct ixgbe_hw *, u8 *); s32 (*get_device_caps)(struct ixgbe_hw *, u16 *); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c index 1e26794febd6..7920ab9a18cb 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c @@ -194,31 +194,6 @@ out: } /** - * ixgbe_get_supported_physical_layer_X540 - Returns physical layer type - * @hw: pointer to hardware structure - * - * Determines physical layer capabilities of the current configuration. - **/ -static u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw) -{ - u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; - u16 ext_ability = 0; - - hw->phy.ops.identify(hw); - - hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD, - &ext_ability); - if (ext_ability & MDIO_PMA_EXTABLE_10GBT) - physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; - if (ext_ability & MDIO_PMA_EXTABLE_1000BT) - physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; - if (ext_ability & MDIO_PMA_EXTABLE_100BTX) - physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; - - return physical_layer; -} - -/** * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params * @hw: pointer to hardware structure * @@ -792,8 +767,6 @@ static struct ixgbe_mac_operations mac_ops_X540 = { .start_hw = &ixgbe_start_hw_X540, .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, .get_media_type = &ixgbe_get_media_type_X540, - .get_supported_physical_layer = - &ixgbe_get_supported_physical_layer_X540, .enable_rx_dma = &ixgbe_enable_rx_dma_generic, .get_mac_addr = &ixgbe_get_mac_addr_generic, .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic, -- 2.11.0