From f380f2c4a12e913356bd49f8790ec1063c4fe9f8 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Fri, 18 May 2012 03:04:08 +0300 Subject: [PATCH] wl1251: fix oops on early interrupt This driver disables interrupt just after requesting it and enables it later, after interface is up. However currently there is a time window between request_irq() and disable_irq() where if interrupt arrives, the driver oopses because it's not yet ready to process it. This can be reproduced by inserting the module, associating and removing the module multiple times. Eliminate this race by setting IRQF_NOAUTOEN flag before request_irq(). Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: Grazvydas Ignotas Signed-off-by: John W. Linville --- drivers/net/wireless/ti/wl1251/sdio.c | 2 +- drivers/net/wireless/ti/wl1251/spi.c | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ti/wl1251/sdio.c b/drivers/net/wireless/ti/wl1251/sdio.c index 1b851f650e07..e2750a12c6f1 100644 --- a/drivers/net/wireless/ti/wl1251/sdio.c +++ b/drivers/net/wireless/ti/wl1251/sdio.c @@ -260,6 +260,7 @@ static int wl1251_sdio_probe(struct sdio_func *func, } if (wl->irq) { + irq_set_status_flags(wl->irq, IRQ_NOAUTOEN); ret = request_irq(wl->irq, wl1251_line_irq, 0, "wl1251", wl); if (ret < 0) { wl1251_error("request_irq() failed: %d", ret); @@ -267,7 +268,6 @@ static int wl1251_sdio_probe(struct sdio_func *func, } irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING); - disable_irq(wl->irq); wl1251_sdio_ops.enable_irq = wl1251_enable_line_irq; wl1251_sdio_ops.disable_irq = wl1251_disable_line_irq; diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c index 6248c354fc5c..87f6305bda2c 100644 --- a/drivers/net/wireless/ti/wl1251/spi.c +++ b/drivers/net/wireless/ti/wl1251/spi.c @@ -281,6 +281,7 @@ static int __devinit wl1251_spi_probe(struct spi_device *spi) wl->use_eeprom = pdata->use_eeprom; + irq_set_status_flags(wl->irq, IRQ_NOAUTOEN); ret = request_irq(wl->irq, wl1251_irq, 0, DRIVER_NAME, wl); if (ret < 0) { wl1251_error("request_irq() failed: %d", ret); @@ -289,8 +290,6 @@ static int __devinit wl1251_spi_probe(struct spi_device *spi) irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING); - disable_irq(wl->irq); - ret = wl1251_init_ieee80211(wl); if (ret) goto out_irq; -- 2.11.0