From f76a0b49402b39b2d314ced52aac2f02d6a6c45d Mon Sep 17 00:00:00 2001 From: John Garry Date: Fri, 8 Apr 2016 17:23:14 +0800 Subject: [PATCH] hisi_sas: for v2 hw only set ITCT qw2 for SAS device This patch fixes the ITCT table setup as it should be configured differently for SAS and SATA devices. For SATA disks there is no need to set qw2 (already zeroed). Also, link parameters for Bus inactive limit, max connection time limit, and reject to open limit timers parameters are changed to match global config register, MAX_CON_TIME_LIMIT_TIME, as recommended by hw team. Signed-off-by: John Garry Reviewed-by: Zhangfei Gao Signed-off-by: Martin K. Petersen --- drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c index cc083b9b1041..4276594a14c8 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c @@ -554,10 +554,11 @@ static void setup_itct_v2_hw(struct hisi_hba *hisi_hba, itct->sas_addr = __swab64(itct->sas_addr); /* qw2 */ - itct->qw2 = cpu_to_le64((500ULL << ITCT_HDR_INLT_OFF) | - (0xff00ULL << ITCT_HDR_BITLT_OFF) | - (0xff00ULL << ITCT_HDR_MCTLT_OFF) | - (0xff00ULL << ITCT_HDR_RTOLT_OFF)); + if (!dev_is_sata(device)) + itct->qw2 = cpu_to_le64((500ULL << ITCT_HDR_INLT_OFF) | + (0x1ULL << ITCT_HDR_BITLT_OFF) | + (0x32ULL << ITCT_HDR_MCTLT_OFF) | + (0x1ULL << ITCT_HDR_RTOLT_OFF)); } static void free_device_v2_hw(struct hisi_hba *hisi_hba, @@ -715,7 +716,7 @@ static void init_reg_v2_hw(struct hisi_hba *hisi_hba) hisi_sas_write32(hisi_hba, HGC_SAS_TX_OPEN_FAIL_RETRY_CTRL, 0x7FF); hisi_sas_write32(hisi_hba, OPENA_WT_CONTI_TIME, 0x1); hisi_sas_write32(hisi_hba, I_T_NEXUS_LOSS_TIME, 0x1F4); - hisi_sas_write32(hisi_hba, MAX_CON_TIME_LIMIT_TIME, 0x4E20); + hisi_sas_write32(hisi_hba, MAX_CON_TIME_LIMIT_TIME, 0x32); hisi_sas_write32(hisi_hba, BUS_INACTIVE_LIMIT_TIME, 0x1); hisi_sas_write32(hisi_hba, CFG_AGING_TIME, 0x1); hisi_sas_write32(hisi_hba, HGC_ERR_STAT_EN, 0x1); -- 2.11.0