From fe244e4c6a0b5acb2b2049fe792c538e70a0d10b Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 25 Jan 2019 11:23:13 +0800 Subject: [PATCH] ARM: dts: sun8i-q8-common: Enable display pipeline with RGB LCD panel The Q8 design for A23/A33 tablets have an 18-bit RGB LCD panel connected to the LCD interface on the SoC, the DC1SW output on the PMIC providing power for the LCD, and PH7 toggling the reset pin for the panel. This patch adds a device node for the panel, describing the above, and enables the display pipeline. The actual model or compatible string for the panel should be added in the tablet device tree file. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-q8-common.dtsi | 37 ++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 719ad769b837..53104f4ccacc 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -49,6 +49,26 @@ ethernet0 = &sdio_wifi; }; + panel: panel { + /* Tablet dts should provide panel compatible */ + backlight = <&backlight>; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + power-supply = <®_dc1sw>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_lcd>; + }; + }; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; /* @@ -64,6 +84,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -90,6 +114,19 @@ }; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + status = "okay"; +}; + +&tcon0_out { + tcon0_out_lcd: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; +}; + &usbphy { usb1_vbus-supply = <®_dldo1>; }; -- 2.11.0