# in case no cpu governor driver autoloads
[ -d /sys/devices/system/cpu/cpu0/cpufreq ] || modprobe acpi-cpufreq
-
- case "$PRODUCT" in
- T10*TA)
- echo on > /sys/bus/platform/drivers/sdhci-acpi/INT33BB:00/power/control
- ;;
- *)
- ;;
- esac
}
function init_hal_audio()
[ "$type" = "wlan" -o "$type" = "bluetooth" ] && echo 1 > $r/state
done
- # these modules are incompatible with bluedroid
- rmmod ath3k
- rmmod btusb
- rmmod bluetooth
+ case "$PRODUCT" in
+ T10*TA)
+ modprobe ak8975
+ modprobe hci-uart
+ BTUART_PORT=/dev/ttyS1
+ brcm_patchram_plus -d --no2bytes --enable_hci --patchram /system/lib/firmware/brcm/bcm43241b4.hcd $BTUART_PORT
+ ;;
+ MacBookPro8*)
+ rmmod b43
+ modprobe b43 btcoex=0
+ modprobe btusb
+ ;;
+ *)
+ for bt in $(lsusb -v | awk ' /Class:.E0/ { print $9 } '); do
+ chown 1002.1002 $bt && chmod 660 $bt
+ done
+ modprobe btusb
+ ;;
+ esac
+
+ if [ -n "$BTUART_PORT" ]; then
+ set_property hal.bluetooth.uart $BTUART_PORT
+ chown bluetooth.bluetooth $BTUART_PORT
+ log -t hciconfig -p i "`hciconfig`"
+ fi
}
function init_hal_camera()
function init_hal_gralloc()
{
case "$(cat /proc/fb | head -1)" in
- 0*inteldrmfb|0*radeondrmfb)
+ 0*inteldrmfb|0*radeondrmfb|0*nouveaufb|0*svgadrmfb)
set_property ro.hardware.gralloc drm
set_drm_mode
;;
- 0*svgadrmfb)
- ;;
"")
init_uvesafb
;&
function init_hal_sensors()
{
+ local hal_sensors=kbd
case "$(cat $DMIPATH/uevent)" in
- *T*00LA*)
- modprobe kfifo-buf
- modprobe industrialio-triggered-buffer
- modprobe hid-sensor-hub
- modprobe hid-sensor-iio-common
- modprobe hid-sensor-trigger
- modprobe hid-sensor-accel-3d
- modprobe hid-sensor-gyro-3d
- modprobe hid-sensor-als
- modprobe hid-sensor-magn-3d
- sleep 1; busybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device?/
- set_property ro.hardware.sensors hsb
- ;;
*Lucid-MWE*)
set_property ro.ignore_atkbd 1
- set_property ro.hardware.sensors hdaps
+ hal_sensors=hdaps
;;
*ICONIA*W5*)
- set_property ro.hardware.sensors w500
+ hal_sensors=w500
;;
*S10-3t*)
- set_property ro.hardware.sensors s103t
+ hal_sensors=s103t
;;
*Inagua*)
#setkeycodes 0x62 29
#setkeycodes 0x74 56
set_property ro.ignore_atkbd 1
- set_property ro.hardware.sensors kbd
set_property hal.sensors.kbd.type 2
;;
*TEGA*|*2010:svnIntel:*)
set_property ro.ignore_atkbd 1
- set_property ro.hardware.sensors kbd
set_property hal.sensors.kbd.type 1
io_switch 0x0 0x1
setkeycodes 0x6d 125
;;
+ *DLI*)
+ set_property ro.ignore_atkbd 1
+ set_property hal.sensors.kbd.type 1
+ setkeycodes 0x64 1
+ setkeycodes 0x65 172
+ setkeycodes 0x66 120
+ setkeycodes 0x67 116
+ setkeycodes 0x68 114
+ setkeycodes 0x69 115
+ setkeycodes 0x6c 114
+ setkeycodes 0x6d 115
+ ;;
*tx2*)
setkeycodes 0xb1 138
setkeycodes 0x8a 152
- set_property ro.hardware.sensors kbd
set_property hal.sensors.kbd.type 6
set_property poweroff.doubleclick 0
set_property qemu.hw.mainkeys 1
*MS-N0E1*)
set_property ro.ignore_atkbd 1
set_property poweroff.doubleclick 0
+ setkeycodes 0xa5 125
+ setkeycodes 0xa7 1
+ setkeycodes 0xe3 142
;;
*Aspire1*25*)
modprobe lis3lv02d_i2c
- set_property ro.hardware.sensors hdaps
+ hal_sensors=hdaps
echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
;;
*ThinkPad*Tablet*)
modprobe hdaps
- set_property ro.hardware.sensors hdaps
+ hal_sensors=hdaps
;;
*)
- set_property ro.hardware.sensors kbd
;;
esac
+
+ # has iio sensor-hub?
+ if [ -n "`ls /sys/bus/iio/devices/iio:device* 2> /dev/null`" ]; then
+ busybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device*/
+ lsmod | grep -q hid_sensor_accel_3d && hal_sensors=hsb || hal_sensors=iio
+ fi
+
+ set_property ro.hardware.sensors $hal_sensors
}
function create_pointercal()
function init_tscal()
{
case "$PRODUCT" in
- T91|T101|ET2002|74499FU|945GSE-ITE8712|CF-19[CDY]*)
+ T91|T101|ET2002|74499FU|945GSE-ITE8712|CF-19[CDYFGKLP]*)
create_pointercal
return
;;
# FIXME: autosleep works better on i965?
[ "$(getprop debug.mesa.driver)" = "i965" ] && setprop debug.autosleep 1
- for bt in $(lsusb -v | awk ' /Class:.E0/ { print $9 } '); do
- chown 1002.1002 $bt && chmod 660 $bt
- done
+ lsmod | grep -e brcmfmac && setprop wlan.no-unload-driver 1
case "$PRODUCT" in
1866???|1867???|1869???) # ThinkPad X41 Tablet
done
}
-PATH=/system/bin:/system/xbin
+function do_hci()
+{
+ local hci=`hciconfig | grep ^hci | cut -d: -f1`
+ local btd="`getprop init.svc.bluetoothd`"
+ log -t bluetoothd -p i "$btd ($hci)"
+ if [ -n "`getprop hal.bluetooth.uart`" ]; then
+ [ "`getprop init.svc.bluetoothd`" = "running" ] && hciconfig $hci up
+ fi
+}
+
+PATH=/sbin:/system/bin:/system/xbin
DMIPATH=/sys/class/dmi/id
BOARD=$(cat $DMIPATH/board_name)
bootcomplete)
do_bootcomplete
;;
+ hci)
+ do_hci
+ ;;
init|"")
do_init
;;