# in case no cpu governor driver autoloads
[ -d /sys/devices/system/cpu/cpu0/cpufreq ] || modprobe acpi-cpufreq
-
- case "$PRODUCT" in
- T10*TA)
- ;;
- *)
- ;;
- esac
}
function init_hal_audio()
[ "$type" = "wlan" -o "$type" = "bluetooth" ] && echo 1 > $r/state
done
- # these modules are incompatible with bluedroid
- rmmod ath3k
- rmmod btusb
- rmmod bluetooth
+ case "$PRODUCT" in
+ T10*TA)
+ modprobe ak8975
+ modprobe hci-uart
+ BTUART_PORT=/dev/ttyS1
+ brcm_patchram_plus -d --no2bytes --enable_hci --patchram /system/lib/firmware/brcm/bcm43241b4.hcd $BTUART_PORT
+ ;;
+ MacBookPro8*)
+ rmmod b43
+ modprobe b43 btcoex=0
+ modprobe btusb
+ ;;
+ *)
+ for bt in $(lsusb -v | awk ' /Class:.E0/ { print $9 } '); do
+ chown 1002.1002 $bt && chmod 660 $bt
+ done
+ modprobe btusb
+ ;;
+ esac
+
+ if [ -n "$BTUART_PORT" ]; then
+ set_property hal.bluetooth.uart $BTUART_PORT
+ chown bluetooth.bluetooth $BTUART_PORT
+ log -t hciconfig -p i "`hciconfig`"
+ fi
}
function init_hal_camera()
function init_hal_gralloc()
{
case "$(cat /proc/fb | head -1)" in
- 0*inteldrmfb|0*radeondrmfb)
+ 0*inteldrmfb|0*radeondrmfb|0*nouveaufb|0*svgadrmfb)
set_property ro.hardware.gralloc drm
set_drm_mode
;;
- 0*svgadrmfb)
- ;;
"")
init_uvesafb
;&
;;
esac
- # has sensor-hub?
- for i in /sys/bus/iio/devices/iio:device?; do
- if [ -e $i/in_accel_scale ]; then
- busybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device?/
- hal_sensors=hsb
- break
- fi
- done
+ # has iio sensor-hub?
+ if [ -n "`ls /sys/bus/iio/devices/iio:device* 2> /dev/null`" ]; then
+ busybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device*/
+ lsmod | grep -q hid_sensor_accel_3d && hal_sensors=hsb || hal_sensors=iio
+ fi
set_property ro.hardware.sensors $hal_sensors
}
lsmod | grep -e brcmfmac && setprop wlan.no-unload-driver 1
- for bt in $(lsusb -v | awk ' /Class:.E0/ { print $9 } '); do
- chown 1002.1002 $bt && chmod 660 $bt
- done
-
case "$PRODUCT" in
1866???|1867???|1869???) # ThinkPad X41 Tablet
start tablet-mode
done
}
-PATH=/system/bin:/system/xbin
+function do_hci()
+{
+ local hci=`hciconfig | grep ^hci | cut -d: -f1`
+ local btd="`getprop init.svc.bluetoothd`"
+ log -t bluetoothd -p i "$btd ($hci)"
+ if [ -n "`getprop hal.bluetooth.uart`" ]; then
+ [ "`getprop init.svc.bluetoothd`" = "running" ] && hciconfig $hci up
+ fi
+}
+
+PATH=/sbin:/system/bin:/system/xbin
DMIPATH=/sys/class/dmi/id
BOARD=$(cat $DMIPATH/board_name)
bootcomplete)
do_bootcomplete
;;
+ hci)
+ do_hci
+ ;;
init|"")
do_init
;;