add ST70416-6 iio.accelerometer tranformation matrix

[android-x86/device-generic-common.git] / init.sh

diff --git a/init.sh b/init.sh
index 20161d6..58aa432 100644 (file)
--- a/init.sh
+++ b/init.sh
@@ -6,8 +6,8 @@
 
 function set_property()
 {
-       # this must be run before post-fs stage
-       echo $1=$2 >> /x86.prop
+       setprop "$1" "$2"
+       [ -n "$DEBUG" ] && echo "$1"="$2" >> /dev/x86.prop
 }
 
 function init_misc()
@@ -32,6 +32,10 @@ function init_hal_audio()
                *)
                        ;;
        esac
+
+       if [ "`cat /proc/asound/card0/id`" = "IntelHDMI" ]; then
+               [ -d /proc/asound/card1 ] || set_property ro.hardware.audio.primary hdmi
+       fi
 }
 
 function init_hal_bluetooth()
@@ -50,6 +54,16 @@ function init_hal_bluetooth()
                        modprobe b43 btcoex=0
                        modprobe btusb
                        ;;
+               # FIXME
+               # Fix MacBook 2013-2015 (Air6/7&Pro11/12) BCM4360 ssb&wl conflict.
+               MacBookPro11* | MacBookPro12* | MacBookAir6* | MacBookAir7*)
+                       rmmod b43
+                       rmmod ssb
+                       rmmod bcma
+                       rmmod wl
+                       modprobe wl
+                       modprobe btusb
+                       ;;
                *)
                        for bt in $(lsusb -v | awk ' /Class:.E0/ { print $9 } '); do
                                chown 1002.1002 $bt && chmod 660 $bt
@@ -93,31 +107,22 @@ function set_drm_mode()
 function init_uvesafb()
 {
        case "$PRODUCT" in
-               *Q550)
-                       UVESA_MODE=${UVESA_MODE:-1280x800}
-                       ;;
                ET2002*)
                        UVESA_MODE=${UVESA_MODE:-1600x900}
                        ;;
-               T91*)
-                       UVESA_MODE=${UVESA_MODE:-1024x600}
-                       ;;
-               VirtualBox*|Bochs*)
-                       UVESA_MODE=${UVESA_MODE:-1024x768}
-                       ;;
                *)
                        ;;
        esac
 
        [ "$HWACCEL" = "0" ] && bpp=16 || bpp=32
-       modprobe uvesafb mode_option=${UVESA_MODE:-800x600}-$bpp ${UVESA_OPTION:-mtrr=3 scroll=redraw}
+       modprobe uvesafb mode_option=${UVESA_MODE:-1024x768}-$bpp ${UVESA_OPTION:-mtrr=3 scroll=redraw}
 }
 
 function init_hal_gralloc()
 {
        case "$(cat /proc/fb | head -1)" in
                *virtiodrmfb)
-                       set_property ro.hardware.hwcomposer drm
+#                      set_property ro.hardware.hwcomposer drm
                        ;&
                0*inteldrmfb|0*radeondrmfb|0*nouveaufb|0*svgadrmfb)
                        set_property ro.hardware.gralloc drm
@@ -159,6 +164,10 @@ function init_hal_power()
 
 function init_hal_sensors()
 {
+       # if we have sensor module for our hardware, use it
+       ro_hardware=$(getprop ro.hardware)
+       [ -f /system/lib/hw/sensors.${ro_hardware}.so ] && return 0
+
        local hal_sensors=kbd
        case "$(cat $DMIPATH/uevent)" in
                *Lucid-MWE*)
@@ -211,13 +220,18 @@ function init_hal_sensors()
                        ;;
                *Aspire1*25*)
                        modprobe lis3lv02d_i2c
-                       hal_sensors=hdaps
                        echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
                        ;;
                *ThinkPad*Tablet*)
                        modprobe hdaps
                        hal_sensors=hdaps
                        ;;
+               *i7Stylus*)
+                       set_property hal.sensors.iio.accel.matrix 1,0,0,0,-1,0,0,0,-1
+                       ;;
+               *ST70416-6*)
+                       set_property hal.sensors.iio.accel.matrix 0,-1,0,-1,0,0,0,0,-1
+                       ;;
                *)
                        ;;
        esac
@@ -226,6 +240,8 @@ function init_hal_sensors()
        if [ -n "`ls /sys/bus/iio/devices/iio:device* 2> /dev/null`" ]; then
                busybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device*/
                lsmod | grep -q hid_sensor_accel_3d && hal_sensors=hsb || hal_sensors=iio
+       elif lsmod | grep -q lis3lv02d_i2c; then
+               hal_sensors=hdaps
        fi
 
        set_property ro.hardware.sensors $hal_sensors
@@ -274,8 +290,10 @@ function init_ril()
                *TEGA*|*2010:svnIntel:*|*Lucid-MWE*)
                        set_property rild.libpath /system/lib/libhuaweigeneric-ril.so
                        set_property rild.libargs "-d /dev/ttyUSB2 -v /dev/ttyUSB1"
+                       set_property ro.radio.noril no
                        ;;
                *)
+                       set_property ro.radio.noril yes
                        ;;
        esac
 }
@@ -305,7 +323,6 @@ function do_init()
        init_hal_sensors
        init_tscal
        init_ril
-       chmod 640 /x86.prop
        post_init
 }
 
@@ -402,7 +419,7 @@ PRODUCT=$(cat $DMIPATH/product_name)
 # import cmdline variables
 for c in `cat /proc/cmdline`; do
        case $c in
-               *.*=*)
+               BOOT_IMAGE=*|iso-scan/*|*.*=*)
                        ;;
                *=*)
                        eval $c