#
-# Copyright (C) 2013-2015 The Android-x86 Open Source Project
+# Copyright (C) 2013-2018 The Android-x86 Open Source Project
#
# License: GNU Public License v2 or later
#
[ -n "$DEBUG" ] && echo "$1"="$2" >> /dev/x86.prop
}
+function set_prop_if_empty()
+{
+ [ -z "$(getprop $1)" ] && set_property "$1" "$2"
+}
+
+function rmmod_if_exist()
+{
+ for m in $*; do
+ [ -d /sys/module/$m ] && rmmod $m
+ done
+}
+
function init_misc()
{
# device information
# in case no cpu governor driver autoloads
[ -d /sys/devices/system/cpu/cpu0/cpufreq ] || modprobe acpi-cpufreq
+
+ # enable sdcardfs if /data is not mounted on tmpfs or 9p
+ mount | grep /data\ | grep -qE 'tmpfs|9p'
+ [ $? -ne 0 ] && modprobe sdcardfs
+
+ # remove wl if it's not used
+ local wifi
+ if [ -d /sys/class/net/wlan0 ]; then
+ wifi=$(basename `readlink /sys/class/net/wlan0/device/driver`)
+ [ "$wifi" != "wl" ] && rmmod_if_exist wl
+ fi
+
+ # enable virt_wifi if needed
+ local eth=`getprop net.virt_wifi eth0`
+ if [ -d /sys/class/net/$eth -a "$VIRT_WIFI" != "0" ]; then
+ if [ -n "$wifi" -a "$VIRT_WIFI" = "1" ]; then
+ rmmod_if_exist iwlmvm $wifi
+ fi
+ if [ ! -d /sys/class/net/wlan0 ]; then
+ ifconfig $eth down
+ ip link set $eth name wifi_eth
+ ifconfig wifi_eth up
+ ip link add link wifi_eth name wlan0 type virt_wifi
+ fi
+ fi
}
function init_hal_audio()
VirtualBox*|Bochs*)
[ -d /proc/asound/card0 ] || modprobe snd-sb16 isapnp=0 irq=5
;;
- *)
+ TS10*)
+ set_prop_if_empty hal.audio.out pcmC0D2p
;;
esac
}
done
case "$PRODUCT" in
- T10*TA|HP*Omni*)
+ T100TAF)
+ set_property bluetooth.interface hci1
+ ;;
+ T10*TA|M80TA|HP*Omni*)
BTUART_PORT=/dev/ttyS1
+ set_property hal.bluetooth.uart.proto bcm
;;
MacBookPro8*)
rmmod b43
modprobe btusb
;;
*)
- for bt in $(lsusb -v | awk ' /Class:.E0/ { print $9 } '); do
+ for bt in $(busybox lsusb -v | awk ' /Class:.E0/ { print $9 } '); do
chown 1002.1002 $bt && chmod 660 $bt
done
- modprobe btusb
;;
esac
if [ -n "$BTUART_PORT" ]; then
set_property hal.bluetooth.uart $BTUART_PORT
chown bluetooth.bluetooth $BTUART_PORT
- start btattach:-B$BTUART_PORT
- log -t hciconfig -p i "`hciconfig`"
+ start btattach
+ fi
+
+ # rtl8723bs bluetooth
+ if dmesg -t | grep -qE '8723bs.*BT'; then
+ TTYSTRING=`dmesg -t | grep -E 'tty.*MMIO' | awk '{print $2}' | head -1`
+ if [ -n "$TTYSTRING" ]; then
+ echo "RTL8723BS BT uses $TTYSTRING for Bluetooth."
+ ln -sf $TTYSTRING /dev/rtk_h5
+ start rtk_hciattach
+ fi
fi
}
function init_hal_camera()
{
- return
+ case "$PRODUCT" in
+ e-tab*Pro)
+ set_prop_if_empty hal.camera.0 0,270
+ set_prop_if_empty hal.camera.2 1,90
+ ;;
+ *)
+ ;;
+ esac
}
function init_hal_gps()
drm_mode=1366x768
;;
*)
+ [ -n "$video" ] && drm_mode=$video
;;
esac
function init_uvesafb()
{
+ UVESA_MODE=${UVESA_MODE:-${video%@*}}
+
case "$PRODUCT" in
ET2002*)
UVESA_MODE=${UVESA_MODE:-1600x900}
;;
esac
- [ "$HWACCEL" = "0" ] && bpp=16 || bpp=32
- modprobe uvesafb mode_option=${UVESA_MODE:-1024x768}-$bpp ${UVESA_OPTION:-mtrr=3 scroll=redraw}
+ modprobe uvesafb mode_option=${UVESA_MODE:-1024x768}-32 ${UVESA_OPTION:-mtrr=3 scroll=redraw}
}
function init_hal_gralloc()
{
+ [ "$VULKAN" = "1" ] && GRALLOC=gbm
+
case "$(cat /proc/fb | head -1)" in
*virtiodrmfb)
-# set_property ro.hardware.hwcomposer drm
- ;&
- 0*inteldrmfb|0*radeondrmfb|0*nouveaufb|0*svgadrmfb)
- set_property ro.hardware.gralloc drm
- set_drm_mode
+ if [ "$HWACCEL" != "0" ]; then
+ set_property ro.hardware.hwcomposer ${HWC:-drm}
+ set_property ro.hardware.gralloc ${GRALLOC:-gbm}
+ set_property debug.drm.mode.force ${video:-1280x800}
+ fi
+ ;;
+ 0*inteldrmfb|0*radeondrmfb|0*nouveaufb|0*svgadrmfb|0*amdgpudrmfb)
+ if [ "$HWACCEL" != "0" ]; then
+ set_property ro.hardware.gralloc ${GRALLOC:-drm}
+ set_drm_mode
+ fi
;;
"")
init_uvesafb
return
}
+function init_hal_vulkan()
+{
+ case "$(cat /proc/fb | head -1)" in
+ 0*inteldrmfb)
+ set_property ro.hardware.vulkan android-x86
+ ;;
+ 0*amdgpudrmfb)
+ set_property ro.hardware.vulkan radv
+ ;;
+ *)
+ ;;
+ esac
+}
+
function init_hal_lights()
{
chown 1000.1000 /sys/class/backlight/*/brightness
# TODO
case "$PRODUCT" in
+ HP*Omni*|OEMB|Standard*PC*|Surface*3|T10*TA|VMware*)
+ set_prop_if_empty sleep.state none
+ ;;
+ e-tab*Pro)
+ set_prop_if_empty sleep.state force
+ ;;
*)
;;
esac
[ -f /system/lib/hw/sensors.${ro_hardware}.so ] && return 0
local hal_sensors=kbd
+ local has_sensors=true
case "$(cat $DMIPATH/uevent)" in
*Lucid-MWE*)
set_property ro.ignore_atkbd 1
modprobe hdaps
hal_sensors=hdaps
;;
- *i7Stylus*)
- set_property hal.sensors.iio.accel.matrix 1,0,0,0,-1,0,0,0,-1
+ *LINX1010B*)
+ set_property ro.iio.accel.z.opt_scale -1
+ ;&
+ *i7Stylus*|*M80TA*)
+ set_property ro.iio.accel.x.opt_scale -1
+ ;;
+ *LenovoMIIX320*|*ONDATablet*)
+ set_property ro.iio.accel.order 102
+ set_property ro.iio.accel.x.opt_scale -1
+ set_property ro.iio.accel.y.opt_scale -1
+ ;;
+ *SP111-33*)
+ set_property ro.iio.accel.quirks no-trig
+ ;&
+ *ST70416-6*)
+ set_property ro.iio.accel.order 102
+ ;;
+ *e-tabPro*|*pnEZpad*)
+ set_property ro.iio.accel.quirks no-trig
+ ;&
+ *T*0*TA*)
+ set_property ro.iio.accel.y.opt_scale -1
;;
*)
+ has_sensors=false
;;
esac
# has iio sensor-hub?
if [ -n "`ls /sys/bus/iio/devices/iio:device* 2> /dev/null`" ]; then
busybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device*/
- lsmod | grep -q hid_sensor_accel_3d && hal_sensors=hsb || hal_sensors=iio
+ [ -n "`ls /sys/bus/iio/devices/iio:device*/in_accel_x_raw 2> /dev/null`" ] && has_sensors=true
+ hal_sensors=iio
elif lsmod | grep -q lis3lv02d_i2c; then
hal_sensors=hdaps
+ has_sensors=true
+ elif [ "$hal_sensors" != "kbd" ]; then
+ has_sensors=true
fi
set_property ro.hardware.sensors $hal_sensors
+ set_property config.override_forced_orient ${HAS_SENSORS:-$has_sensors}
}
function create_pointercal()
init_hal_gps
init_hal_gralloc
init_hal_hwcomposer
+ init_hal_vulkan
init_hal_lights
init_hal_power
init_hal_sensors
function do_bootcomplete()
{
+ hciconfig | grep -q hci || pm disable com.android.bluetooth
+
init_cpu_governor
[ -z "$(getprop persist.sys.root_access)" ] && setprop persist.sys.root_access 3
- # FIXME: autosleep works better on i965?
- [ "$(getprop debug.mesa.driver)" = "i965" ] && setprop debug.autosleep 1
-
- lsmod | grep -e brcmfmac && setprop wlan.no-unload-driver 1
+ lsmod | grep -Ehq "brcmfmac|rtl8723be" && setprop wlan.no-unload-driver 1
case "$PRODUCT" in
1866???|1867???|1869???) # ThinkPad X41 Tablet
setkeycodes 0x66 172
setkeycodes 0x6b 127
;;
+ Surface*Go)
+ echo on > /sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/power/control
+ ;;
+ VMware*)
+ pm disable com.android.bluetooth
+ ;;
+ X80*Power)
+ set_property power.nonboot-cpu-off 1
+ ;;
*)
;;
esac
alsa_amixer -c $c set Headphone on
alsa_amixer -c $c set Headphone 100%
alsa_amixer -c $c set Speaker 100%
- alsa_amixer -c $c set Capture 100%
+ alsa_amixer -c $c set Capture 80%
alsa_amixer -c $c set Capture cap
alsa_amixer -c $c set PCM 100 unmute
alsa_amixer -c $c set SPO unmute
- alsa_amixer -c $c set 'Mic Boost' 3
- alsa_amixer -c $c set 'Internal Mic Boost' 3
+ alsa_amixer -c $c set IEC958 on
+ alsa_amixer -c $c set 'Mic Boost' 1
+ alsa_amixer -c $c set 'Internal Mic Boost' 1
fi
done
-}
-function do_hci()
-{
- local hci=`hciconfig | grep ^hci | cut -d: -f1`
- local btd="`getprop init.svc.bluetoothd`"
- log -t bluetoothd -p i "$btd ($hci)"
- if [ -n "`getprop hal.bluetooth.uart`" ]; then
- [ "`getprop init.svc.bluetoothd`" = "running" ] && hciconfig $hci up
- fi
+ post_bootcomplete
}
PATH=/sbin:/system/bin:/system/xbin
eval $c
if [ -z "$1" ]; then
case $c in
- HWACCEL=*)
- set_property debug.egl.hw $HWACCEL
- ;;
DEBUG=*)
[ -n "$DEBUG" ] && set_property debug.logcat 1
;;
bootcomplete)
do_bootcomplete
;;
- hci)
- do_hci
- ;;
init|"")
do_init
;;