#
-# Copyright (C) 2013 The Android-x86 Open Source Project
+# Copyright (C) 2013-2015 The Android-x86 Open Source Project
#
# License: GNU Public License v2 or later
#
function set_property()
{
- # this must be run before post-fs stage
- echo $1=$2 >> /x86.prop
+ setprop "$1" "$2"
+ [ -n "$DEBUG" ] && echo "$1"="$2" >> /dev/x86.prop
}
function init_misc()
{
+ # device information
+ setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
+ setprop ro.product.model "$PRODUCT"
+
# a hack for USB modem
lsusb | grep 1a8d:1000 && eject
# in case no cpu governor driver autoloads
[ -d /sys/devices/system/cpu/cpu0/cpufreq ] || modprobe acpi-cpufreq
-
- case "$PRODUCT" in
- T10*TA)
- ;;
- *)
- ;;
- esac
}
function init_hal_audio()
[ "$type" = "wlan" -o "$type" = "bluetooth" ] && echo 1 > $r/state
done
- # these modules are incompatible with bluedroid
- rmmod ath3k
- rmmod btusb
- rmmod bluetooth
- set_property ro.rfkilldisabled 1
+ case "$PRODUCT" in
+ T10*TA|HP*Omni*)
+ BTUART_PORT=/dev/ttyS1
+ ;;
+ MacBookPro8*)
+ rmmod b43
+ modprobe b43 btcoex=0
+ modprobe btusb
+ ;;
+ # FIXME
+ # Fix MacBook 2013-2015 (Air6/7&Pro11/12) BCM4360 ssb&wl conflict.
+ MacBookPro11* | MacBookPro12* | MacBookAir6* | MacBookAir7*)
+ rmmod b43
+ rmmod ssb
+ rmmod bcma
+ rmmod wl
+ modprobe wl
+ modprobe btusb
+ ;;
+ *)
+ for bt in $(lsusb -v | awk ' /Class:.E0/ { print $9 } '); do
+ chown 1002.1002 $bt && chmod 660 $bt
+ done
+ modprobe btusb
+ ;;
+ esac
+
+ if [ -n "$BTUART_PORT" ]; then
+ set_property hal.bluetooth.uart $BTUART_PORT
+ chown bluetooth.bluetooth $BTUART_PORT
+ start btattach:-B$BTUART_PORT
+ log -t hciconfig -p i "`hciconfig`"
+ fi
}
function init_hal_camera()
{
- [ -c /dev/video0 ] || modprobe vivi
+ return
}
function init_hal_gps()
function init_uvesafb()
{
case "$PRODUCT" in
- *Q550)
- UVESA_MODE=${UVESA_MODE:-1280x800}
- ;;
ET2002*)
UVESA_MODE=${UVESA_MODE:-1600x900}
;;
- T91*)
- UVESA_MODE=${UVESA_MODE:-1024x600}
- ;;
- VirtualBox*|Bochs*)
- UVESA_MODE=${UVESA_MODE:-1024x768}
- ;;
*)
;;
esac
- modprobe uvesafb mode_option=${UVESA_MODE:-800x600}-16 ${UVESA_OPTION:-mtrr=3 scroll=redraw}
+ [ "$HWACCEL" = "0" ] && bpp=16 || bpp=32
+ modprobe uvesafb mode_option=${UVESA_MODE:-1024x768}-$bpp ${UVESA_OPTION:-mtrr=3 scroll=redraw}
}
function init_hal_gralloc()
{
case "$(cat /proc/fb | head -1)" in
- 0*inteldrmfb|0*radeondrmfb)
+ *virtiodrmfb)
+# set_property ro.hardware.hwcomposer drm
+ ;&
+ 0*inteldrmfb|0*radeondrmfb|0*nouveaufb|0*svgadrmfb)
set_property ro.hardware.gralloc drm
set_drm_mode
;;
- 0*svgadrmfb)
- ;;
"")
init_uvesafb
;&
0*)
- [ "$HWACCEL" = "1" ] || set_property debug.egl.hw 0
;;
esac
+
+ [ -n "$DEBUG" ] && set_property debug.egl.trace error
}
function init_hal_hwcomposer()
function init_hal_sensors()
{
+ # if we have sensor module for our hardware, use it
+ ro_hardware=$(getprop ro.hardware)
+ [ -f /system/lib/hw/sensors.${ro_hardware}.so ] && return 0
+
local hal_sensors=kbd
case "$(cat $DMIPATH/uevent)" in
*Lucid-MWE*)
;;
*Aspire1*25*)
modprobe lis3lv02d_i2c
- hal_sensors=hdaps
echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
;;
*ThinkPad*Tablet*)
modprobe hdaps
hal_sensors=hdaps
;;
+ *i7Stylus*)
+ set_property hal.sensors.iio.accel.matrix 1,0,0,0,-1,0,0,0,-1
+ ;;
*)
;;
esac
- # has sensor-hub?
- for i in /sys/bus/iio/devices/iio:device?; do
- if [ -e $i/in_accel_scale ]; then
- busybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device?/
- hal_sensors=hsb
- break
- fi
- done
+ # has iio sensor-hub?
+ if [ -n "`ls /sys/bus/iio/devices/iio:device* 2> /dev/null`" ]; then
+ busybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device*/
+ lsmod | grep -q hid_sensor_accel_3d && hal_sensors=hsb || hal_sensors=iio
+ elif lsmod | grep -q lis3lv02d_i2c; then
+ hal_sensors=hdaps
+ fi
set_property ro.hardware.sensors $hal_sensors
}
function init_tscal()
{
case "$PRODUCT" in
+ ST70416-6*)
+ modprobe gslx680_ts_acpi
+ ;&
T91|T101|ET2002|74499FU|945GSE-ITE8712|CF-19[CDYFGKLP]*)
create_pointercal
return
set_property rild.libargs "-d /dev/ttyUSB2 -v /dev/ttyUSB1"
;;
*)
- set_property rild.libpath /system/lib/libreference-ril.so
- set_property rild.libargs "-d /dev/ttyUSB2"
;;
esac
}
init_hal_sensors
init_tscal
init_ril
- chmod 640 /x86.prop
post_init
}
lsmod | grep -e brcmfmac && setprop wlan.no-unload-driver 1
- for bt in $(lsusb -v | awk ' /Class:.E0/ { print $9 } '); do
- chown 1002.1002 $bt && chmod 660 $bt
- done
-
case "$PRODUCT" in
1866???|1867???|1869???) # ThinkPad X41 Tablet
start tablet-mode
alsa_amixer -c $c set Capture 100%
alsa_amixer -c $c set Capture cap
alsa_amixer -c $c set PCM 100 unmute
+ alsa_amixer -c $c set SPO unmute
alsa_amixer -c $c set 'Mic Boost' 3
alsa_amixer -c $c set 'Internal Mic Boost' 3
fi
done
}
-PATH=/system/bin:/system/xbin
+function do_hci()
+{
+ local hci=`hciconfig | grep ^hci | cut -d: -f1`
+ local btd="`getprop init.svc.bluetoothd`"
+ log -t bluetoothd -p i "$btd ($hci)"
+ if [ -n "`getprop hal.bluetooth.uart`" ]; then
+ [ "`getprop init.svc.bluetoothd`" = "running" ] && hciconfig $hci up
+ fi
+}
+
+PATH=/sbin:/system/bin:/system/xbin
DMIPATH=/sys/class/dmi/id
BOARD=$(cat $DMIPATH/board_name)
# import cmdline variables
for c in `cat /proc/cmdline`; do
case $c in
- androidboot.hardware=*)
+ BOOT_IMAGE=*|iso-scan/*|*.*=*)
;;
*=*)
eval $c
+ if [ -z "$1" ]; then
+ case $c in
+ HWACCEL=*)
+ set_property debug.egl.hw $HWACCEL
+ ;;
+ DEBUG=*)
+ [ -n "$DEBUG" ] && set_property debug.logcat 1
+ ;;
+ esac
+ fi
;;
esac
done
bootcomplete)
do_bootcomplete
;;
+ hci)
+ do_hci
+ ;;
init|"")
do_init
;;