OSDN Git Service

Fix some Mac WiFi drivers conflict
[android-x86/device-generic-common.git] / init.sh
diff --git a/init.sh b/init.sh
index 8758717..afc347f 100644 (file)
--- a/init.sh
+++ b/init.sh
@@ -1,30 +1,26 @@
 #
-# Copyright (C) 2013 The Android-x86 Open Source Project
+# Copyright (C) 2013-2015 The Android-x86 Open Source Project
 #
 # License: GNU Public License v2 or later
 #
 
 function set_property()
 {
-       # this must be run before post-fs stage
-       echo $1=$2 >> /x86.prop
+       setprop "$1" "$2"
+       [ -n "$DEBUG" ] && echo "$1"="$2" >> /dev/x86.prop
 }
 
 function init_misc()
 {
+       # device information
+       setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
+       setprop ro.product.model "$PRODUCT"
+
        # a hack for USB modem
        lsusb | grep 1a8d:1000 && eject
 
        # in case no cpu governor driver autoloads
        [ -d /sys/devices/system/cpu/cpu0/cpufreq ] || modprobe acpi-cpufreq
-
-       case "$PRODUCT" in
-               T10*TA)
-                       modprobe ak8975
-                       ;;
-               *)
-                       ;;
-       esac
 }
 
 function init_hal_audio()
@@ -45,16 +41,44 @@ function init_hal_bluetooth()
                [ "$type" = "wlan" -o "$type" = "bluetooth" ] && echo 1 > $r/state
        done
 
-       # these modules are incompatible with bluedroid
-       rmmod ath3k
-       rmmod btusb
-       rmmod bluetooth
-       set_property ro.rfkilldisabled 1
+       case "$PRODUCT" in
+               T10*TA|HP*Omni*)
+                       BTUART_PORT=/dev/ttyS1
+                       ;;
+               MacBookPro8*)
+                       rmmod b43
+                       modprobe b43 btcoex=0
+                       modprobe btusb
+                       ;;
+               # FIXME
+               # Fix MacBook 2013-2015 (Air6/7&Pro11/12) BCM4360 ssb&wl conflict.
+               MacBookPro11* | MacBookPro12* | MacBookAir6* | MacBookAir7*)
+                       rmmod b43
+                       rmmod ssb
+                       rmmod bcma
+                       rmmod wl
+                       modprobe wl
+                       modprobe btusb
+                       ;;
+               *)
+                       for bt in $(lsusb -v | awk ' /Class:.E0/ { print $9 } '); do
+                               chown 1002.1002 $bt && chmod 660 $bt
+                       done
+                       modprobe btusb
+                       ;;
+       esac
+
+       if [ -n "$BTUART_PORT" ]; then
+               set_property hal.bluetooth.uart $BTUART_PORT
+               chown bluetooth.bluetooth $BTUART_PORT
+               start btattach:-B$BTUART_PORT
+               log -t hciconfig -p i "`hciconfig`"
+       fi
 }
 
 function init_hal_camera()
 {
-       [ -c /dev/video0 ] || modprobe vivi
+       return
 }
 
 function init_hal_gps()
@@ -95,25 +119,28 @@ function init_uvesafb()
                        ;;
        esac
 
-       modprobe uvesafb mode_option=${UVESA_MODE:-800x600}-16 ${UVESA_OPTION:-mtrr=3 scroll=redraw}
+       [ "$HWACCEL" = "0" ] && bpp=16 || bpp=32
+       modprobe uvesafb mode_option=${UVESA_MODE:-800x600}-$bpp ${UVESA_OPTION:-mtrr=3 scroll=redraw}
 }
 
 function init_hal_gralloc()
 {
        case "$(cat /proc/fb | head -1)" in
-               0*inteldrmfb|0*radeondrmfb)
+               *virtiodrmfb)
+#                      set_property ro.hardware.hwcomposer drm
+                       ;&
+               0*inteldrmfb|0*radeondrmfb|0*nouveaufb|0*svgadrmfb)
                        set_property ro.hardware.gralloc drm
                        set_drm_mode
                        ;;
-               0*svgadrmfb)
-                       ;;
                "")
                        init_uvesafb
                        ;&
                0*)
-                       [ "$HWACCEL" = "1" ] || set_property debug.egl.hw 0
                        ;;
        esac
+
+       [ -n "$DEBUG" ] && set_property debug.egl.trace error
 }
 
 function init_hal_hwcomposer()
@@ -201,16 +228,18 @@ function init_hal_sensors()
                        modprobe hdaps
                        hal_sensors=hdaps
                        ;;
+               *i7Stylus*)
+                       set_property hal.sensors.iio.accel.matrix 1,0,0,0,-1,0,0,0,-1
+                       ;;
                *)
                        ;;
        esac
 
-       # has sensor-hub?
-       for i in /sys/bus/iio/devices/iio:device?; do
-               busybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device?/
+       # has iio sensor-hub?
+       if [ -n "`ls /sys/bus/iio/devices/iio:device* 2> /dev/null`" ]; then
+               busybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device*/
                lsmod | grep -q hid_sensor_accel_3d && hal_sensors=hsb || hal_sensors=iio
-               break
-       done
+       fi
 
        set_property ro.hardware.sensors $hal_sensors
 }
@@ -229,6 +258,9 @@ function create_pointercal()
 function init_tscal()
 {
        case "$PRODUCT" in
+               ST70416-6*)
+                       modprobe gslx680_ts_acpi
+                       ;&
                T91|T101|ET2002|74499FU|945GSE-ITE8712|CF-19[CDYFGKLP]*)
                        create_pointercal
                        return
@@ -257,8 +289,6 @@ function init_ril()
                        set_property rild.libargs "-d /dev/ttyUSB2 -v /dev/ttyUSB1"
                        ;;
                *)
-                       set_property rild.libpath /system/lib/libreference-ril.so
-                       set_property rild.libargs "-d /dev/ttyUSB2"
                        ;;
        esac
 }
@@ -288,7 +318,6 @@ function do_init()
        init_hal_sensors
        init_tscal
        init_ril
-       chmod 640 /x86.prop
        post_init
 }
 
@@ -308,10 +337,6 @@ function do_bootcomplete()
 
        lsmod | grep -e brcmfmac && setprop wlan.no-unload-driver 1
 
-       for bt in $(lsusb -v | awk ' /Class:.E0/ { print $9 } '); do
-               chown 1002.1002 $bt && chmod 660 $bt
-       done
-
        case "$PRODUCT" in
                1866???|1867???|1869???) # ThinkPad X41 Tablet
                        start tablet-mode
@@ -363,13 +388,24 @@ function do_bootcomplete()
                        alsa_amixer -c $c set Capture 100%
                        alsa_amixer -c $c set Capture cap
                        alsa_amixer -c $c set PCM 100 unmute
+                       alsa_amixer -c $c set SPO unmute
                        alsa_amixer -c $c set 'Mic Boost' 3
                        alsa_amixer -c $c set 'Internal Mic Boost' 3
                fi
        done
 }
 
-PATH=/system/bin:/system/xbin
+function do_hci()
+{
+       local hci=`hciconfig | grep ^hci | cut -d: -f1`
+       local btd="`getprop init.svc.bluetoothd`"
+       log -t bluetoothd -p i "$btd ($hci)"
+       if [ -n "`getprop hal.bluetooth.uart`" ]; then
+               [ "`getprop init.svc.bluetoothd`" = "running" ] && hciconfig $hci up
+       fi
+}
+
+PATH=/sbin:/system/bin:/system/xbin
 
 DMIPATH=/sys/class/dmi/id
 BOARD=$(cat $DMIPATH/board_name)
@@ -378,10 +414,20 @@ PRODUCT=$(cat $DMIPATH/product_name)
 # import cmdline variables
 for c in `cat /proc/cmdline`; do
        case $c in
-               androidboot.hardware=*)
+               *.*=*)
                        ;;
                *=*)
                        eval $c
+                       if [ -z "$1" ]; then
+                               case $c in
+                                       HWACCEL=*)
+                                               set_property debug.egl.hw $HWACCEL
+                                               ;;
+                                       DEBUG=*)
+                                               [ -n "$DEBUG" ] && set_property debug.logcat 1
+                                               ;;
+                               esac
+                       fi
                        ;;
        esac
 done
@@ -399,6 +445,9 @@ case "$1" in
        bootcomplete)
                do_bootcomplete
                ;;
+       hci)
+               do_hci
+               ;;
        init|"")
                do_init
                ;;