Fix some Mac WiFi drivers conflict

[android-x86/device-generic-common.git] / init.sh

diff --git a/init.sh b/init.sh
index 96cbaa3..afc347f 100644 (file)
--- a/init.sh
+++ b/init.sh
@@ -1,17 +1,21 @@
 #
-# Copyright (C) 2013 The Android-x86 Open Source Project
+# Copyright (C) 2013-2015 The Android-x86 Open Source Project
 #
 # License: GNU Public License v2 or later
 #
 
 function set_property()
 {
-       # this must be run before post-fs stage
-       echo $1=$2 >> /x86.prop
+       setprop "$1" "$2"
+       [ -n "$DEBUG" ] && echo "$1"="$2" >> /dev/x86.prop
 }
 
 function init_misc()
 {
+       # device information
+       setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
+       setprop ro.product.model "$PRODUCT"
+
        # a hack for USB modem
        lsusb | grep 1a8d:1000 && eject
 
@@ -38,17 +42,24 @@ function init_hal_bluetooth()
        done
 
        case "$PRODUCT" in
-               T10*TA)
-                       modprobe ak8975
-                       modprobe hci-uart
+               T10*TA|HP*Omni*)
                        BTUART_PORT=/dev/ttyS1
-                       brcm_patchram_plus -d --no2bytes --enable_hci --patchram /system/lib/firmware/brcm/bcm43241b4.hcd $BTUART_PORT
                        ;;
                MacBookPro8*)
                        rmmod b43
                        modprobe b43 btcoex=0
                        modprobe btusb
                        ;;
+               # FIXME
+               # Fix MacBook 2013-2015 (Air6/7&Pro11/12) BCM4360 ssb&wl conflict.
+               MacBookPro11* | MacBookPro12* | MacBookAir6* | MacBookAir7*)
+                       rmmod b43
+                       rmmod ssb
+                       rmmod bcma
+                       rmmod wl
+                       modprobe wl
+                       modprobe btusb
+                       ;;
                *)
                        for bt in $(lsusb -v | awk ' /Class:.E0/ { print $9 } '); do
                                chown 1002.1002 $bt && chmod 660 $bt
@@ -60,13 +71,14 @@ function init_hal_bluetooth()
        if [ -n "$BTUART_PORT" ]; then
                set_property hal.bluetooth.uart $BTUART_PORT
                chown bluetooth.bluetooth $BTUART_PORT
+               start btattach:-B$BTUART_PORT
                log -t hciconfig -p i "`hciconfig`"
        fi
 }
 
 function init_hal_camera()
 {
-       [ -c /dev/video0 ] || modprobe vivi
+       return
 }
 
 function init_hal_gps()
@@ -107,12 +119,16 @@ function init_uvesafb()
                        ;;
        esac
 
-       modprobe uvesafb mode_option=${UVESA_MODE:-800x600}-16 ${UVESA_OPTION:-mtrr=3 scroll=redraw}
+       [ "$HWACCEL" = "0" ] && bpp=16 || bpp=32
+       modprobe uvesafb mode_option=${UVESA_MODE:-800x600}-$bpp ${UVESA_OPTION:-mtrr=3 scroll=redraw}
 }
 
 function init_hal_gralloc()
 {
        case "$(cat /proc/fb | head -1)" in
+               *virtiodrmfb)
+#                      set_property ro.hardware.hwcomposer drm
+                       ;&
                0*inteldrmfb|0*radeondrmfb|0*nouveaufb|0*svgadrmfb)
                        set_property ro.hardware.gralloc drm
                        set_drm_mode
@@ -121,9 +137,10 @@ function init_hal_gralloc()
                        init_uvesafb
                        ;&
                0*)
-                       [ "$HWACCEL" = "1" ] || set_property debug.egl.hw 0
                        ;;
        esac
+
+       [ -n "$DEBUG" ] && set_property debug.egl.trace error
 }
 
 function init_hal_hwcomposer()
@@ -211,6 +228,9 @@ function init_hal_sensors()
                        modprobe hdaps
                        hal_sensors=hdaps
                        ;;
+               *i7Stylus*)
+                       set_property hal.sensors.iio.accel.matrix 1,0,0,0,-1,0,0,0,-1
+                       ;;
                *)
                        ;;
        esac
@@ -238,6 +258,9 @@ function create_pointercal()
 function init_tscal()
 {
        case "$PRODUCT" in
+               ST70416-6*)
+                       modprobe gslx680_ts_acpi
+                       ;&
                T91|T101|ET2002|74499FU|945GSE-ITE8712|CF-19[CDYFGKLP]*)
                        create_pointercal
                        return
@@ -266,8 +289,6 @@ function init_ril()
                        set_property rild.libargs "-d /dev/ttyUSB2 -v /dev/ttyUSB1"
                        ;;
                *)
-                       set_property rild.libpath /system/lib/libreference-ril.so
-                       set_property rild.libargs "-d /dev/ttyUSB2"
                        ;;
        esac
 }
@@ -297,7 +318,6 @@ function do_init()
        init_hal_sensors
        init_tscal
        init_ril
-       chmod 640 /x86.prop
        post_init
 }
 
@@ -394,10 +414,20 @@ PRODUCT=$(cat $DMIPATH/product_name)
 # import cmdline variables
 for c in `cat /proc/cmdline`; do
        case $c in
-               androidboot.hardware=*)
+               *.*=*)
                        ;;
                *=*)
                        eval $c
+                       if [ -z "$1" ]; then
+                               case $c in
+                                       HWACCEL=*)
+                                               set_property debug.egl.hw $HWACCEL
+                                               ;;
+                                       DEBUG=*)
+                                               [ -n "$DEBUG" ] && set_property debug.logcat 1
+                                               ;;
+                               esac
+                       fi
                        ;;
        esac
 done