#
-# Copyright (C) 2013-2015 The Android-x86 Open Source Project
+# Copyright (C) 2013-2018 The Android-x86 Open Source Project
#
# License: GNU Public License v2 or later
#
[ -n "$DEBUG" ] && echo "$1"="$2" >> /dev/x86.prop
}
+function set_prop_if_empty()
+{
+ [ -z "$(getprop $1)" ] && set_property "$1" "$2"
+}
+
+function rmmod_if_exist()
+{
+ for m in $*; do
+ [ -d /sys/module/$m ] && rmmod $m
+ done
+}
+
function init_misc()
{
# device information
# enable sdcardfs if /data is not mounted on tmpfs or 9p
mount | grep /data\ | grep -qE 'tmpfs|9p'
- [ $? -ne 0 ] && modprobe sdcardfs
+ [ $? -eq 0 ] && set_prop_if_empty ro.sys.sdcardfs false
+
+ # remove wl if it's not used
+ local wifi
+ if [ -d /sys/class/net/wlan0 ]; then
+ wifi=$(basename `readlink /sys/class/net/wlan0/device/driver`)
+ [ "$wifi" != "wl" ] && rmmod_if_exist wl
+ fi
+
+ # enable virt_wifi if needed
+ local eth=`getprop net.virt_wifi eth0`
+ if [ -d /sys/class/net/$eth -a "$VIRT_WIFI" != "0" ]; then
+ if [ -n "$wifi" -a "$VIRT_WIFI" = "1" ]; then
+ rmmod_if_exist iwlmvm $wifi
+ fi
+ if [ ! -d /sys/class/net/wlan0 ]; then
+ ifconfig $eth down
+ ip link set $eth name wifi_eth
+ ifconfig wifi_eth up
+ ip link add link wifi_eth name wlan0 type virt_wifi
+ fi
+ fi
}
function init_hal_audio()
done
case "$PRODUCT" in
- T10*TA|HP*Omni*)
+ T100TAF)
+ set_property bluetooth.interface hci1
+ ;;
+ T10*TA|M80TA|HP*Omni*)
BTUART_PORT=/dev/ttyS1
set_property hal.bluetooth.uart.proto bcm
- [ -z "$(getprop sleep.state)" ] && set_property sleep.state none
;;
MacBookPro8*)
rmmod b43
function init_hal_camera()
{
- return
+ case "$UEVENT" in
+ *e-tabPro*)
+ set_prop_if_empty hal.camera.0 0,270
+ set_prop_if_empty hal.camera.2 1,90
+ ;;
+ *LenovoideapadD330*)
+ set_prop_if_empty hal.camera.0 0,90
+ set_prop_if_empty hal.camera.2 1,90
+ ;;
+ *)
+ ;;
+ esac
}
function init_hal_gps()
ET1602*)
drm_mode=1366x768
;;
- VMware*)
- [ -n "$video" ] && drm_mode=$video
- ;;
*)
+ [ -n "$video" ] && drm_mode=$video
;;
esac
function init_uvesafb()
{
+ UVESA_MODE=${UVESA_MODE:-${video%@*}}
+
case "$PRODUCT" in
ET2002*)
UVESA_MODE=${UVESA_MODE:-1600x900}
if [ "$HWACCEL" != "0" ]; then
set_property ro.hardware.hwcomposer drm
set_property ro.hardware.gralloc gbm
+ set_property debug.drm.mode.force ${video:-1280x800}
fi
+ set_prop_if_empty sleep.state none
;;
0*inteldrmfb|0*radeondrmfb|0*nouveaufb|0*svgadrmfb|0*amdgpudrmfb)
if [ "$HWACCEL" != "0" ]; then
# TODO
case "$PRODUCT" in
+ HP*Omni*|OEMB|Surface*3|T10*TA)
+ set_prop_if_empty sleep.state none
+ ;;
+ e-tab*Pro)
+ set_prop_if_empty sleep.state force
+ ;;
*)
;;
esac
local hal_sensors=kbd
local has_sensors=true
- case "$(cat $DMIPATH/uevent)" in
+ case "$UEVENT" in
*Lucid-MWE*)
set_property ro.ignore_atkbd 1
hal_sensors=hdaps
modprobe hdaps
hal_sensors=hdaps
;;
- *i7Stylus*)
- set_property ro.iio.accel.y.opt_scale -1
+ *LenovoideapadD330*)
+ set_property ro.iio.accel.quirks no-trig
+ set_property ro.iio.accel.order 102
+ ;&
+ *LINX1010B*)
+ set_property ro.iio.accel.x.opt_scale -1
set_property ro.iio.accel.z.opt_scale -1
;;
- *ONDATablet*)
+ *i7-WN*)
+ set_property ro.iio.accel.quirks no-trig
+ ;&
+ *i7Stylus*)
+ set_property ro.iio.accel.x.opt_scale -1
+ ;;
+ *LenovoMIIX320*|*ONDATablet*)
set_property ro.iio.accel.order 102
+ set_property ro.iio.accel.x.opt_scale -1
+ set_property ro.iio.accel.y.opt_scale -1
;;
+ *SP111-33*)
+ set_property ro.iio.accel.quirks no-trig
+ ;&
*ST70416-6*)
set_property ro.iio.accel.order 102
+ ;;
+ *e-tabPro*|*pnEZpad*|*TECLAST:rntPAD*)
+ set_property ro.iio.accel.quirks no-trig
;&
- *Surface.3*|*svnOEMB*|*T305CA*)
+ *T*0*TA*|*M80TA*)
set_property ro.iio.accel.y.opt_scale -1
- ;&
- *T10*TA*)
- set_property ro.iio.accel.x.opt_scale -1
- set_property ro.iio.accel.z.opt_scale -1
;;
*)
has_sensors=false
# has iio sensor-hub?
if [ -n "`ls /sys/bus/iio/devices/iio:device* 2> /dev/null`" ]; then
busybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device*/
+ [ -n "`ls /sys/bus/iio/devices/iio:device*/in_accel_x_raw 2> /dev/null`" ] && has_sensors=true
hal_sensors=iio
elif lsmod | grep -q lis3lv02d_i2c; then
hal_sensors=hdaps
+ has_sensors=true
+ elif [ "$hal_sensors" != "kbd" ]; then
+ has_sensors=true
fi
set_property ro.hardware.sensors $hal_sensors
- [ "$hal_sensors" != "kbd" ] && has_sensors=true
- set_property config.override_forced_orient $has_sensors
+ set_property config.override_forced_orient ${HAS_SENSORS:-$has_sensors}
}
function create_pointercal()
function init_tscal()
{
- case "$PRODUCT" in
- ST70416-6*)
+ case "$UEVENT" in
+ *ST70416-6*)
modprobe gslx680_ts_acpi
;&
- T91|T101|ET2002|74499FU|945GSE-ITE8712|CF-19[CDYFGKLP]*)
+ *T91*|*T101*|*ET2002*|*74499FU*|*945GSE-ITE8712*|*CF-19[CDYFGKLP]*|*TECLAST:rntPAD*)
create_pointercal
return
;;
function init_ril()
{
- case "$(cat $DMIPATH/uevent)" in
+ case "$UEVENT" in
*TEGA*|*2010:svnIntel:*|*Lucid-MWE*)
set_property rild.libpath /system/lib/libhuaweigeneric-ril.so
set_property rild.libargs "-d /dev/ttyUSB2 -v /dev/ttyUSB1"
function do_bootcomplete()
{
+ hciconfig | grep -q hci || pm disable com.android.bluetooth
+
init_cpu_governor
[ -z "$(getprop persist.sys.root_access)" ] && setprop persist.sys.root_access 3
setkeycodes 0x66 172
setkeycodes 0x6b 127
;;
+ Surface*Go)
+ echo on > /sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/power/control
+ ;;
+ X80*Power)
+ set_property power.nonboot-cpu-off 1
+ ;;
*)
;;
esac
alsa_amixer -c $c set Headphone on
alsa_amixer -c $c set Headphone 100%
alsa_amixer -c $c set Speaker 100%
- alsa_amixer -c $c set Capture 100%
+ alsa_amixer -c $c set Capture 80%
alsa_amixer -c $c set Capture cap
- alsa_amixer -c $c set PCM 100 unmute
+ alsa_amixer -c $c set PCM 100% unmute
alsa_amixer -c $c set SPO unmute
alsa_amixer -c $c set IEC958 on
- alsa_amixer -c $c set 'Mic Boost' 3
- alsa_amixer -c $c set 'Internal Mic Boost' 3
+ alsa_amixer -c $c set 'Mic Boost' 1
+ alsa_amixer -c $c set 'Internal Mic Boost' 1
fi
done
DMIPATH=/sys/class/dmi/id
BOARD=$(cat $DMIPATH/board_name)
PRODUCT=$(cat $DMIPATH/product_name)
+UEVENT=$(cat $DMIPATH/uevent)
# import cmdline variables
for c in `cat /proc/cmdline`; do
OSDN Git Service
