X-Git-Url: http://git.osdn.net/view?p=android-x86%2Fdevice-generic-common.git;a=blobdiff_plain;f=init.sh;h=ab7f50dbee956fe2d5ed63080ad686054473f4f1;hp=736d176168121dd586516c4a430e5d98418614e0;hb=67c1b4ff3c55498e1252147419f64faa8253c57d;hpb=4036bc50911981cd257b6429216dc570562a36e6

diff --git a/init.sh b/init.sh
index 736d176..ab7f50d 100644
--- a/init.sh
+++ b/init.sh
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2013-2015 The Android-x86 Open Source Project
+# Copyright (C) 2013-2018 The Android-x86 Open Source Project
 #
 # License: GNU Public License v2 or later
 #
@@ -10,6 +10,18 @@ function set_property()
 	[ -n "$DEBUG" ] && echo "$1"="$2" >> /dev/x86.prop
 }
 
+function set_prop_if_empty()
+{
+	[ -z "$(getprop $1)" ] && set_property "$1" "$2"
+}
+
+function rmmod_if_exist()
+{
+	for m in $*; do
+		[ -d /sys/module/$m ] && rmmod $m
+	done
+}
+
 function init_misc()
 {
 	# device information
@@ -21,6 +33,31 @@ function init_misc()
 
 	# in case no cpu governor driver autoloads
 	[ -d /sys/devices/system/cpu/cpu0/cpufreq ] || modprobe acpi-cpufreq
+
+	# enable sdcardfs if /data is not mounted on tmpfs or 9p
+	mount | grep /data\ | grep -qE 'tmpfs|9p'
+	[ $? -ne 0 ] && modprobe sdcardfs
+
+	# remove wl if it's not used
+	local wifi
+	if [ -d /sys/class/net/wlan0 ]; then
+		wifi=$(basename `readlink /sys/class/net/wlan0/device/driver`)
+		[ "$wifi" != "wl" ] && rmmod_if_exist wl
+	fi
+
+	# enable virt_wifi if needed
+	local eth=`getprop net.virt_wifi eth0`
+	if [ -d /sys/class/net/$eth -a "$VIRT_WIFI" != "0" ]; then
+		if [ -n "$wifi" -a "$VIRT_WIFI" = "1" ]; then
+			rmmod_if_exist iwlmvm $wifi
+		fi
+		if [ ! -d /sys/class/net/wlan0 ]; then
+			ifconfig $eth down
+			ip link set $eth name wifi_eth
+			ifconfig wifi_eth up
+			ip link add link wifi_eth name wlan0 type virt_wifi
+		fi
+	fi
 }
 
 function init_hal_audio()
@@ -29,13 +66,10 @@ function init_hal_audio()
 		VirtualBox*|Bochs*)
 			[ -d /proc/asound/card0 ] || modprobe snd-sb16 isapnp=0 irq=5
 			;;
-		*)
+		TS10*)
+			set_prop_if_empty hal.audio.out pcmC0D2p
 			;;
 	esac
-
-	if grep -qi "IntelHDMI" /proc/asound/card0/id; then
-		[ -d /proc/asound/card1 ] || set_property ro.hardware.audio.primary hdmi
-	fi
 }
 
 function init_hal_bluetooth()
@@ -46,10 +80,12 @@ function init_hal_bluetooth()
 	done
 
 	case "$PRODUCT" in
-		T10*TA|HP*Omni*)
+		T100TAF)
+			set_property bluetooth.interface hci1
+			;;
+		T10*TA|M80TA|HP*Omni*)
 			BTUART_PORT=/dev/ttyS1
 			set_property hal.bluetooth.uart.proto bcm
-			[ -z "$(getprop sleep.state)" ] && set_property sleep.state none
 			;;
 		MacBookPro8*)
 			rmmod b43
@@ -92,7 +128,14 @@ function init_hal_bluetooth()
 
 function init_hal_camera()
 {
-	return
+	case "$PRODUCT" in
+		e-tab*Pro)
+			set_prop_if_empty hal.camera.0 0,270
+			set_prop_if_empty hal.camera.2 1,90
+			;;
+		*)
+			;;
+	esac
 }
 
 function init_hal_gps()
@@ -108,6 +151,7 @@ function set_drm_mode()
 			drm_mode=1366x768
 			;;
 		*)
+			[ -n "$video" ] && drm_mode=$video
 			;;
 	esac
 
@@ -116,6 +160,8 @@ function set_drm_mode()
 
 function init_uvesafb()
 {
+	UVESA_MODE=${UVESA_MODE:-${video%@*}}
+
 	case "$PRODUCT" in
 		ET2002*)
 			UVESA_MODE=${UVESA_MODE:-1600x900}
@@ -124,19 +170,26 @@ function init_uvesafb()
 			;;
 	esac
 
-	[ "$HWACCEL" = "0" ] && bpp=16 || bpp=32
-	modprobe uvesafb mode_option=${UVESA_MODE:-1024x768}-$bpp ${UVESA_OPTION:-mtrr=3 scroll=redraw}
+	modprobe uvesafb mode_option=${UVESA_MODE:-1024x768}-32 ${UVESA_OPTION:-mtrr=3 scroll=redraw}
 }
 
 function init_hal_gralloc()
 {
+	[ "$VULKAN" = "1" ] && GRALLOC=gbm
+
 	case "$(cat /proc/fb | head -1)" in
 		*virtiodrmfb)
-#			set_property ro.hardware.hwcomposer drm
-			;&
+			if [ "$HWACCEL" != "0" ]; then
+				set_property ro.hardware.hwcomposer ${HWC:-drm}
+				set_property ro.hardware.gralloc ${GRALLOC:-gbm}
+				set_property debug.drm.mode.force ${video:-1280x800}
+			fi
+			;;
 		0*inteldrmfb|0*radeondrmfb|0*nouveaufb|0*svgadrmfb|0*amdgpudrmfb)
-			set_property ro.hardware.gralloc drm
-			set_drm_mode
+			if [ "$HWACCEL" != "0" ]; then
+				set_property ro.hardware.gralloc ${GRALLOC:-drm}
+				set_drm_mode
+			fi
 			;;
 		"")
 			init_uvesafb
@@ -154,6 +207,20 @@ function init_hal_hwcomposer()
 	return
 }
 
+function init_hal_vulkan()
+{
+	case "$(cat /proc/fb | head -1)" in
+		0*inteldrmfb)
+			set_property ro.hardware.vulkan android-x86
+			;;
+		0*amdgpudrmfb)
+			set_property ro.hardware.vulkan radv
+			;;
+		*)
+			;;
+	esac
+}
+
 function init_hal_lights()
 {
 	chown 1000.1000 /sys/class/backlight/*/brightness
@@ -167,6 +234,12 @@ function init_hal_power()
 
 	# TODO
 	case "$PRODUCT" in
+		HP*Omni*|OEMB|Standard*PC*|Surface*3|T10*TA|VMware*)
+			set_prop_if_empty sleep.state none
+			;;
+		e-tab*Pro)
+			set_prop_if_empty sleep.state force
+			;;
 		*)
 			;;
 	esac
@@ -237,31 +310,45 @@ function init_hal_sensors()
 			modprobe hdaps
 			hal_sensors=hdaps
 			;;
-		*i7Stylus*)
-			set_property hal.sensors.iio.accel.matrix 1,0,0,0,-1,0,0,0,-1
+		*LINX1010B*)
+			set_property ro.iio.accel.z.opt_scale -1
+			;&
+		*i7Stylus*|*M80TA*)
+			set_property ro.iio.accel.x.opt_scale -1
+			;;
+		*LenovoMIIX320*|*ONDATablet*)
+			set_property ro.iio.accel.order 102
+			set_property ro.iio.accel.x.opt_scale -1
+			set_property ro.iio.accel.y.opt_scale -1
 			;;
 		*ST70416-6*)
-			set_property hal.sensors.iio.accel.matrix 0,-1,0,-1,0,0,0,0,-1
+			set_property ro.iio.accel.order 102
 			;;
-		*ONDATablet*)
-			set_property hal.sensors.iio.accel.matrix 0,1,0,1,0,0,0,0,-1
+		*e-tabPro*|*pnEZpad*)
+			set_property ro.iio.accel.quirks no-trig
+			;&
+		*T*0*TA*)
+			set_property ro.iio.accel.y.opt_scale -1
 			;;
 		*)
-			#has_sensors=false
+			has_sensors=false
 			;;
 	esac
 
 	# has iio sensor-hub?
 	if [ -n "`ls /sys/bus/iio/devices/iio:device* 2> /dev/null`" ]; then
 		busybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device*/
-		lsmod | grep -q hid_sensor_accel_3d && hal_sensors=hsb || hal_sensors=iio
+		[ -n "`ls /sys/bus/iio/devices/iio:device*/in_accel_x_raw 2> /dev/null`" ] && has_sensors=true
+		hal_sensors=iio
 	elif lsmod | grep -q lis3lv02d_i2c; then
 		hal_sensors=hdaps
+		has_sensors=true
+	elif [ "$hal_sensors" != "kbd" ]; then
+		has_sensors=true
 	fi
 
 	set_property ro.hardware.sensors $hal_sensors
-	[ "$hal_sensors" != "kbd" ] && has_sensors=true
-	set_property config.override_forced_orient $has_sensors
+	set_property config.override_forced_orient ${HAS_SENSORS:-$has_sensors}
 }
 
 function create_pointercal()
@@ -335,6 +422,7 @@ function do_init()
 	init_hal_gps
 	init_hal_gralloc
 	init_hal_hwcomposer
+	init_hal_vulkan
 	init_hal_lights
 	init_hal_power
 	init_hal_sensors
@@ -350,6 +438,8 @@ function do_netconsole()
 
 function do_bootcomplete()
 {
+	hciconfig | grep -q hci || pm disable com.android.bluetooth
+
 	init_cpu_governor
 
 	[ -z "$(getprop persist.sys.root_access)" ] && setprop persist.sys.root_access 3
@@ -388,6 +478,15 @@ function do_bootcomplete()
 			setkeycodes 0x66 172
 			setkeycodes 0x6b 127
 			;;
+		Surface*Go)
+			echo on > /sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/power/control
+			;;
+		VMware*)
+			pm disable com.android.bluetooth
+			;;
+		X80*Power)
+			set_property power.nonboot-cpu-off 1
+			;;
 		*)
 			;;
 	esac
@@ -404,12 +503,13 @@ function do_bootcomplete()
 			alsa_amixer -c $c set Headphone on
 			alsa_amixer -c $c set Headphone 100%
 			alsa_amixer -c $c set Speaker 100%
-			alsa_amixer -c $c set Capture 100%
+			alsa_amixer -c $c set Capture 80%
 			alsa_amixer -c $c set Capture cap
 			alsa_amixer -c $c set PCM 100 unmute
 			alsa_amixer -c $c set SPO unmute
-			alsa_amixer -c $c set 'Mic Boost' 3
-			alsa_amixer -c $c set 'Internal Mic Boost' 3
+			alsa_amixer -c $c set IEC958 on
+			alsa_amixer -c $c set 'Mic Boost' 1
+			alsa_amixer -c $c set 'Internal Mic Boost' 1
 		fi
 	done
 
@@ -431,9 +531,6 @@ for c in `cat /proc/cmdline`; do
 			eval $c
 			if [ -z "$1" ]; then
 				case $c in
-					HWACCEL=*)
-						set_property debug.egl.hw $HWACCEL
-						;;
 					DEBUG=*)
 						[ -n "$DEBUG" ] && set_property debug.logcat 1
 						;;